1 more trip, I'll have goddie's! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*boytoytrading* · 07-21-2003, 03:39 AM

I'm planning on leaving the Spring's for Waverly IL on the 8th of Aug.

I will, if needed, have a AC, or non AC cab on the trailer. I have two cab's, 67-72, that will be fresh out of the body shop with new rocker's, corner's, and support's. Cab's are completly stripped and in primer. This is the CAB ONLY, there is no door's, no glass, nothing but a cab. $800, for non ac cab, and $900 for AC cab.
I do not have any picture's, for they are not done yet. I will give a guarantee though. These prices are with delivery up to Waverly IL only. any farther, will have to work out.

I also have ton's of misc. part's as well, ie: door's, fender's, bed's, I also have tranny's of all kind's, rear end's, a complete 283 motor, and so on.

If you need something, let me know, my trailer will fill quickly. I am in need for a SWB step-side bed/fender's. Thank's

*boytoytrading* · 07-21-2003, 03:40 AM

Quote:

Originally posted by boytoytrading
I'm planning on leaving the Spring's for Waverly IL on the 8th of Aug.

I will, if needed, have a AC, or non AC cab on the trailer. I have two cab's, 67-72, that will be fresh out of the body shop with new rocker's, corner's, and support's. Cab's are completly stripped and in primer. This is the CAB ONLY, there is no door's, no glass, nothing but a cab. $800, for non ac cab, and $900 for AC cab.
I do not have any picture's, for they are not done yet. I will give a guarantee though. These prices are with delivery up to Waverly IL only. any farther, will have to work out.

I also have ton's of misc. part's as well, ie: door's, fender's, bed's, I also have tranny's of all kind's, rear end's, a complete 283 motor, and so on.

If you need something, let me know, my trailer will fill quickly. I am in need for a SWB step-side bed/fender's. Thank's

JREs69er · 07-21-2003, 04:33 AM

I MIGHT BE INTERESTED IN THE A/C CAB. IS IT A HIGH HUMP? WHEN IT WAS REDONE, DID THEY USE OEM OR AFTER MARKET PARTS? HAS THE DASH BE CUT? DO YOU HAVE ANY DECENT DOORS FOR A 69, AND IF SO HOW MUCH? JRE

*boytoytrading* · 07-21-2003, 05:01 AM

OEM part's were used, the dash is uncut, and yes, I have 1 pair of door's left, No rust or dent's, and no speaker hole's. $300.

JREs69er · 07-21-2003, 05:11 AM

IS IT A HIGH HUMP? I AM ABOUT 200 MILES NORTH OF WHERE YOU WILL BE. WHAT WOULD THE CHANCE BE OF YOU DELIVERING TO ME AND HOW MUCH FOR THE CAB, DOORS AND DELIVERY?

kxmotox247 · 07-21-2003, 08:33 AM

Got a SWB rolling chassis? I'm looking for one to put under my 68'.

*boytoytrading* · 07-21-2003, 11:08 AM

Quote:

Originally posted by kxmotox247
Got a SWB rolling chassis? I'm looking for one to put under my 68'.

Yes I do. It's a 67 SWB step-side. This one is a 6-lug chassis. I would take $300 for the Chassis, title included.

firedog · 07-21-2003, 06:07 PM

would you be interested in a 68 a/c cab and a stripped 72 long bed truck for the trip back I may even be interested in just a simple trade for some parts or whatever I am about 30 mins south of st. louis in Missouri i do have some pics that i could email if interested

*boytoytrading* · 07-22-2003, 08:00 AM

I would consider any trade you may present.

07-21-2003, 03:39 AM	#1
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	1 more trip, I'll have goddie's! I'm planning on leaving the Spring's for Waverly IL on the 8th of Aug. I will, if needed, have a AC, or non AC cab on the trailer. I have two cab's, 67-72, that will be fresh out of the body shop with new rocker's, corner's, and support's. Cab's are completly stripped and in primer. This is the CAB ONLY, there is no door's, no glass, nothing but a cab. $800, for non ac cab, and $900 for AC cab. I do not have any picture's, for they are not done yet. I will give a guarantee though. These prices are with delivery up to Waverly IL only. any farther, will have to work out. I also have ton's of misc. part's as well, ie: door's, fender's, bed's, I also have tranny's of all kind's, rear end's, a complete 283 motor, and so on. If you need something, let me know, my trailer will fill quickly. I am in need for a SWB step-side bed/fender's. Thank's Attached Images

07-21-2003, 04:33 AM	#3
JREs69er Registered User Join Date: Apr 2003 Location: Romeoville, IL Posts: 75	A/C CAB I MIGHT BE INTERESTED IN THE A/C CAB. IS IT A HIGH HUMP? WHEN IT WAS REDONE, DID THEY USE OEM OR AFTER MARKET PARTS? HAS THE DASH BE CUT? DO YOU HAVE ANY DECENT DOORS FOR A 69, AND IF SO HOW MUCH? JRE

07-21-2003, 05:01 AM	#4
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	AC Cab OEM part's were used, the dash is uncut, and yes, I have 1 pair of door's left, No rust or dent's, and no speaker hole's. $300.

07-21-2003, 08:33 AM	#6
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,396	Got a SWB rolling chassis? I'm looking for one to put under my 68'. __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

07-21-2003, 06:07 PM	#8
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,004	would you be interested in a 68 a/c cab and a stripped 72 long bed truck for the trip back I may even be interested in just a simple trade for some parts or whatever I am about 30 mins south of st. louis in Missouri i do have some pics that i could email if interested __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride

07-21-2003, 05:11 AM	#5
JREs69er Registered User Join Date: Apr 2003 Location: Romeoville, IL Posts: 75	IS IT A HIGH HUMP? I AM ABOUT 200 MILES NORTH OF WHERE YOU WILL BE. WHAT WOULD THE CHANCE BE OF YOU DELIVERING TO ME AND HOW MUCH FOR THE CAB, DOORS AND DELIVERY?

07-22-2003, 08:00 AM	#9
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Trades I would consider any trade you may present.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.