IA 1970 Chevy C/20 Parting out - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970K20 · 05-11-2011, 12:57 AM

Hi Ryan

Do you still have the C/20 badges?

Thanks
Posted via Mobile Device

Paul's53chevy · 05-25-2011, 10:54 PM

I'm interested in the rear end, but just the gears. It should have floating axles, the chuck style pumkin housing rear comes out. Please give this a quick read - it'll tell you what I'm talking about, I'm not completely up on my terminology.

http://www.oldgmctrucks.com/page0276.html

Shipping to 68626 on just the middle (not the whole axle, but the whole pumkin) or I might be able to drive over there. Let me know please

**Dieselwrencher** · 05-26-2011, 12:51 AM

Yes it was an eaton axle. How ever the truck has been crushed and I no longer have the rear end. Sorry Ryan.

rdkonkel · 05-30-2011, 12:18 AM

I would like the doors with all the parts inside. Where are you located?
Ryan
Winona MN
custombuildremod@yahoo.com

**Dieselwrencher** · 05-30-2011, 01:29 PM

Quote:

Originally Posted by 1970K20

Hi Ryan

Do you still have the C/20 badges?

Thanks
Posted via Mobile Device

I do have some Custom/20's if that's what you're looking for.

**Dieselwrencher** · 05-30-2011, 01:33 PM

Quote:

Originally Posted by rdkonkel

I would like the doors with all the parts inside. Where are you located?
Ryan
Winona MN
custombuildremod@yahoo.com

I'm sorry but the doors were scrapped with the truck. Ryan. Check out Teeitup's parts threads. I'm going there this weekend and can bring parts back if needed. Then you could just meet me around here sometime to arrange a pick up. Ryan.

1972K20 · 05-30-2011, 02:37 PM

Quote:

Originally Posted by Dieselwrencher

I'm sorry but the doors were scrapped with the truck.

That's too bad...

rdkonkel · 05-31-2011, 08:44 AM

I'm new to this forum and don't really know my way around it yet. How do I look up his threads?
Anyhow, your not too far away from Winona MN so I would appreciate it if you would do that for me, I can paypal you what he wants for the parts and give you a couple bucks for your time if that works.
Ryan
custombuildremod@yahoo.com
8700 E. 8th St.
Winona MN 55987
507-459-4443

**Dieselwrencher** · 05-31-2011, 12:28 PM

Here is one of his trucks he is parting. But to search his posts and threads, click his username, go down to view user profile, when that comes up click statistics and then view threads or posts.

http://www.67-72chevytrucks.com/vboa...d.php?t=466410

PLANETGETLOW · 05-31-2011, 12:34 PM

do you have the seat belts left? I need a good set for my sons truck?

chevydog66 · 06-21-2011, 10:41 PM

Interested in the master cylinder cap if it's not dented or too rusty on the inside. To Fort Wayne, In. 46808

**Dieselwrencher** · 06-22-2011, 03:18 PM

Quote:

Originally Posted by PLANETGETLOW

do you have the seat belts left? I need a good set for my sons truck?

No sorry, they went with the truck when I scrapped it.

Quote:

Originally Posted by chevydog66

Interested in the master cylinder cap if it's not dented or too rusty on the inside. To Fort Wayne, In. 46808

I will check to see if I have an extra.

PhileCool · 07-20-2011, 08:18 PM

I know this is an older post but do you still have this truck and if so I need the seat and dash pad

PhileCool · 07-20-2011, 08:18 PM

oops I didn't read all i seen it got scraped

Sarge · 07-20-2011, 08:30 PM

power steering pump n brackets still available? steve

**Dieselwrencher** · 07-20-2011, 10:41 PM

I have the pump, but I will have to check on the bracket.

Sarge · 07-21-2011, 09:47 AM

thanks...lmk price to 13135...

**Dieselwrencher** · 07-21-2011, 04:59 PM

Sorry, I don't have a power steering bracket for it. Only the pump and pulley.

Sarge · 07-21-2011, 05:19 PM

how much for the pump n pulley, and did it work well? Thanks. Steve

**Dieselwrencher** · 07-21-2011, 07:29 PM

I drove it on and off the trailer and tore it apart. It did work ok though. How's $30 shipped sound?

Steve Hafner · 07-21-2011, 08:24 PM

I'd like to have about TWO dump truck loads of that SNOW in your first pictures !!!
It was 104 degrees here today !!! LOL

Sarge · 07-21-2011, 10:03 PM

I'll take it, will PM you address n payment...paypal ok?

**Dieselwrencher** · 07-21-2011, 10:29 PM

Yep, that's fine. PM coming.

**Dieselwrencher** · 07-21-2011, 10:31 PM

Quote:

Originally Posted by Steve Hafner

I'd like to have about TWO dump truck loads of that SNOW in your first pictures !!!
It was 104 degrees here today !!! LOL

It would be nice wouldn't it? It didn't get to 100 today, but it has been for about a week now. Yes, the thought of snow sounds ok. But i'll deal with the heat and enjoy it because our winters have been a little on the frigid and heavy on the snow lately.

J.kenton · 09-25-2012, 08:54 AM

do you still have the drivers side fender? and the auto trans crossmember? if so I will take both, shipping to 87413. let me know a price and i will work out payment. will you take paypal?

05-11-2011, 12:57 AM	#126
1970K20 Registered User Join Date: Apr 2011 Location: Clearwater BC Posts: 8	Re: 1970 Chevy C/20 Parting out Hi Ryan Do you still have the C/20 badges? Thanks Posted via Mobile Device __________________ 1970 K20 2007 Dyna 1964 Airstream Overlander

05-25-2011, 10:54 PM	#127
Paul's53chevy Registered User Join Date: Jul 2009 Location: Brainard Nebraska Posts: 9	Re: 1970 Chevy C/20 Parting out I'm interested in the rear end, but just the gears. It should have floating axles, the chuck style pumkin housing rear comes out. Please give this a quick read - it'll tell you what I'm talking about, I'm not completely up on my terminology. http://www.oldgmctrucks.com/page0276.html Shipping to 68626 on just the middle (not the whole axle, but the whole pumkin) or I might be able to drive over there. Let me know please

05-26-2011, 12:51 AM	#128
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1970 Chevy C/20 Parting out Yes it was an eaton axle. How ever the truck has been crushed and I no longer have the rear end. Sorry Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-30-2011, 12:18 AM	#129
rdkonkel Registered User Join Date: Apr 2011 Location: Winona MN Posts: 22	Re: 1970 Chevy C/20 Parting out I would like the doors with all the parts inside. Where are you located? Ryan Winona MN custombuildremod@yahoo.com __________________ If it ain't smokin' fix it.

05-31-2011, 08:44 AM	#133
rdkonkel Registered User Join Date: Apr 2011 Location: Winona MN Posts: 22	Re: 1970 Chevy C/20 Parting out I'm new to this forum and don't really know my way around it yet. How do I look up his threads? Anyhow, your not too far away from Winona MN so I would appreciate it if you would do that for me, I can paypal you what he wants for the parts and give you a couple bucks for your time if that works. Ryan custombuildremod@yahoo.com 8700 E. 8th St. Winona MN 55987 507-459-4443 __________________ If it ain't smokin' fix it.

05-31-2011, 12:28 PM	#134
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1970 Chevy C/20 Parting out Here is one of his trucks he is parting. But to search his posts and threads, click his username, go down to view user profile, when that comes up click statistics and then view threads or posts. http://www.67-72chevytrucks.com/vboa...d.php?t=466410 __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-31-2011, 12:34 PM	#135
PLANETGETLOW Registered User Join Date: May 2008 Location: California Posts: 161	Re: 1970 Chevy C/20 Parting out do you have the seat belts left? I need a good set for my sons truck?

06-21-2011, 10:41 PM	#136
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: 1970 Chevy C/20 Parting out Interested in the master cylinder cap if it's not dented or too rusty on the inside. To Fort Wayne, In. 46808 __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-20-2011, 08:18 PM	#138
PhileCool Registered User Join Date: Jul 2011 Location: Athens,Ohio Posts: 28	Re: 1970 Chevy C/20 Parting out I know this is an older post but do you still have this truck and if so I need the seat and dash pad

07-20-2011, 08:18 PM	#139
PhileCool Registered User Join Date: Jul 2011 Location: Athens,Ohio Posts: 28	Re: 1970 Chevy C/20 Parting out oops I didn't read all i seen it got scraped

07-20-2011, 08:30 PM	#140
Sarge Registered User Join Date: Jul 2011 Location: syracuse ny Posts: 18	Re: 1970 Chevy C/20 Parting out power steering pump n brackets still available? steve

07-20-2011, 10:41 PM	#141
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1970 Chevy C/20 Parting out I have the pump, but I will have to check on the bracket. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-21-2011, 09:47 AM	#142
Sarge Registered User Join Date: Jul 2011 Location: syracuse ny Posts: 18	Re: 1970 Chevy C/20 Parting out thanks...lmk price to 13135...

07-21-2011, 04:59 PM	#143
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1970 Chevy C/20 Parting out Sorry, I don't have a power steering bracket for it. Only the pump and pulley. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-21-2011, 05:19 PM	#144
Sarge Registered User Join Date: Jul 2011 Location: syracuse ny Posts: 18	Re: 1970 Chevy C/20 Parting out how much for the pump n pulley, and did it work well? Thanks. Steve



Register or Log In To remove these advertisements.

07-21-2011, 07:29 PM	#145
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1970 Chevy C/20 Parting out I drove it on and off the trailer and tore it apart. It did work ok though. How's $30 shipped sound? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-21-2011, 08:24 PM	#146
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: 1970 Chevy C/20 Parting out I'd like to have about TWO dump truck loads of that SNOW in your first pictures !!! It was 104 degrees here today !!! LOL Attached Images __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526

07-21-2011, 10:03 PM	#147
Sarge Registered User Join Date: Jul 2011 Location: syracuse ny Posts: 18	Re: 1970 Chevy C/20 Parting out I'll take it, will PM you address n payment...paypal ok?

07-21-2011, 10:29 PM	#148
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1970 Chevy C/20 Parting out Yep, that's fine. PM coming. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-25-2012, 08:54 AM	#150
J.kenton Registered User Join Date: Jul 2012 Location: bloomfield newmexico Posts: 36	Re: 1970 Chevy C/20 Parting out do you still have the drivers side fender? and the auto trans crossmember? if so I will take both, shipping to 87413. let me know a price and i will work out payment. will you take paypal?

Register or Log In To remove these advertisements.