Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-24-2011, 12:02 AM | #12 |
motor exploder
Join Date: Mar 2009
Location: Pittsburgh, PA
Posts: 2,346
|
Re: Boss 338 / Coys C5 wheel question
I'm running a 73-87 style front end on my '69 with the Boss 338's. I have CPP '73-87 2.5" drop spindles, CPP tubular arms and 2" springs. I have 73-87 1.25" rotors and had to turn them down so the front wheel would seat on the rotor all the way. I'm running 18x8's in front with 4.5" bs, 245/40/18's. 18x12's rear with 7.5" bs, 335/30/18's and will end up running a 1/2" spacer in the rear to even out the track width since I'm running my original 69 rear which is narrower than the 71-72 rears. Look for project 'Silver Dollar' in the builds section, he's running 18's also and has a complete truck to look at, mine is only a chassis at this point.
__________________
Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!! |
Bookmarks |
|
|