CA Parting a 1967 GMC 1/2 great parts to be had - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 06-16-2011, 06:46 AM

would u happen to have the front clip bolts? i need pretty much all of them. fenders, hood hinge bolts, cowl bolts, and grille to fender bolts.

mine is a 67 chevy front clip, not sure if it makes a difference
Posted via Mobile Device

Baggerjohn · 06-16-2011, 10:39 AM

How much for the gauge cluster and heater controls? Thanks

ortegamotor · 06-16-2011, 12:03 PM

Quote:

Originally Posted by timberjim36

hey Tony did you see question about the heater control

hey Jim the heater control is your if you want it. $ 27. shipped to you. i can get it out today. Tony

ortegamotor · 06-16-2011, 12:06 PM

Quote:

Originally Posted by Baggerjohn

How much for the gauge cluster and heater controls? Thanks

hey John, all i have is the gauge cluster. it comes with an extra bezel . the OE one had a crack in it. i can ship to you for $ 40.00 out the door. just PM me either way. thanks Tony

ortegamotor · 06-16-2011, 12:08 PM

Quote:

Originally Posted by kev2809

would u happen to have the front clip bolts? i need pretty much all of them. fenders, hood hinge bolts, cowl bolts, and grille to fender bolts.

mine is a 67 chevy front clip, not sure if it makes a difference
Posted via Mobile Device

hey Kev , i can send you the whole front clip bolt set , everything for $40 shipped to your door. just pm me if interested. thanks for your time. Tony

timberjim36 · 06-18-2011, 09:29 AM

thanks Tony I'll take it I can send payment on tuesday if thats ok

ortegamotor · 06-18-2011, 12:36 PM

Cool, thanks Tim. I,ll get a box of bolts ready to go.
Posted via Mobile Device

marios1968panel · 06-20-2011, 08:04 PM

Did you figure out what gears you have and price? Thanks.

67gmcstepside · 06-22-2011, 04:28 PM

would you have the rear bumper brackets available?

ortegamotor · 06-22-2011, 06:23 PM

Quote:

Originally Posted by 67gmcstepside

would you have the rear bumper brackets available?

let me check on it. i'll get right back to you. Thanks

tac106842 · 06-23-2011, 08:59 AM

Im interested in the front frame horns from the radiator support forward if your interested in cutting them off. Do you have the front bumper brackets as well? Let me know how much? Thanks.

ortegamotor · 06-23-2011, 09:30 AM

Quote:

Originally Posted by tac106842

Im interested in the front frame horns from the radiator support forward if your interested in cutting them off. Do you have the front bumper brackets as well? Let me know how much? Thanks.

i do have both and how far back are you looking to make the cut?

tac106842 · 06-23-2011, 09:58 AM

Could you cut right in front of the radiator support? My radiator support mounts are good but the PO cut off the bumper mounts. I can reweld the mounts on I just need a good frame horn. Could you send pics of the frame horns and the brackets? How much for the parts and shipping to 43402? Thanks.

67gmcV8 · 07-04-2011, 01:28 PM

how much for the e-brake handle assembly

67gmcV8 · 07-04-2011, 03:41 PM

whats the cost to have it shipped to 62417

Low & Slow · 07-07-2011, 09:38 AM

Looking for the parking brake cables and brackets from the rear axle all the way to the handle. Everything to go on a bare frame. You're basically my last hope

Shipping to 18066?

Accept paypal?

ortegamotor · 07-07-2011, 01:06 PM

Quote:

Originally Posted by tac106842

Could you cut right in front of the radiator support? My radiator support mounts are good but the PO cut off the bumper mounts. I can reweld the mounts on I just need a good frame horn. Could you send pics of the frame horns and the brackets? How much for the parts and shipping to 43402? Thanks.

Hey Aaron here are some pictures of the frame . PM when you're ready to go. Tony

ortegamotor · 07-07-2011, 01:09 PM

Quote:

Originally Posted by Low & Slow

Looking for the parking brake cables and brackets from the rear axle all the way to the handle. Everything to go on a bare frame. You're basically my last hope

Shipping to 18066?

Accept paypal?

are you talking about the rear axel cables as well? so two rear axel cables , and all the brackets and tensioner cable all the way to the handle . correct ?

1972hays · 07-07-2011, 01:32 PM

Is the gauge cluster still for sale i read that the face is broken does it have the vac and does all of the gauge work

ortegamotor · 07-07-2011, 08:04 PM

Quote:

Originally Posted by 1972hays

Is the gauge cluster still for sale i read that the face is broken does it have the vac and does all of the gauge work

i do have it and it was in working order $ 50.00. just PM your info to get a shipping quote .

ROCKthe68 · 07-08-2011, 12:19 AM

Is there a high hump trans cover?

ortegamotor · 07-08-2011, 09:01 AM

Quote:

Originally Posted by ROCKthe68

Is there a high hump trans cover?

sorry no high hump, sold

hatred · 07-25-2011, 01:38 AM

Can you send me pics of the doors please? Bottoms and any known problems?

Thanks,

Tony

shaneschevys · 07-26-2011, 01:43 AM

Do you still have the door panels and the glove box door with the gmc emblem? If so how much shipped

69Mule · 07-26-2011, 07:11 PM

I might be interested in the front upper and lower control arms.. Can you quote me a price and shipping to 91354?

06-16-2011, 06:46 AM	#176
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,138	Re: Parting a 1967 GMC 1/2 great parts to be had would u happen to have the front clip bolts? i need pretty much all of them. fenders, hood hinge bolts, cowl bolts, and grille to fender bolts. mine is a 67 chevy front clip, not sure if it makes a difference Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-16-2011, 10:39 AM	#177
Baggerjohn Registered User Join Date: Jan 2011 Location: Bullhead City, AZ Posts: 60	Re: Parting a 1967 GMC 1/2 great parts to be had How much for the gauge cluster and heater controls? Thanks __________________ "Arrive, Raise Hell, Create Confusion, Leave".

06-18-2011, 09:29 AM	#181
timberjim36 Registered User Join Date: Jun 2011 Location: cape cod ma Posts: 160	Re: Parting a 1967 GMC 1/2 great parts to be had thanks Tony I'll take it I can send payment on tuesday if thats ok __________________ 1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver) 92 harley electra glide ultra classic

06-18-2011, 12:36 PM	#182
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had Cool, thanks Tim. I,ll get a box of bolts ready to go. Posted via Mobile Device

06-20-2011, 08:04 PM	#183
marios1968panel Registered User Join Date: Nov 2008 Location: Sacramento, CA. Posts: 5	Re: Parting a 1967 GMC 1/2 great parts to be had Did you figure out what gears you have and price? Thanks.

06-22-2011, 04:28 PM	#184
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: Parting a 1967 GMC 1/2 great parts to be had would you have the rear bumper brackets available?

06-23-2011, 08:59 AM	#186
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Parting a 1967 GMC 1/2 great parts to be had Im interested in the front frame horns from the radiator support forward if your interested in cutting them off. Do you have the front bumper brackets as well? Let me know how much? Thanks.

06-23-2011, 09:58 AM	#188
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Parting a 1967 GMC 1/2 great parts to be had Could you cut right in front of the radiator support? My radiator support mounts are good but the PO cut off the bumper mounts. I can reweld the mounts on I just need a good frame horn. Could you send pics of the frame horns and the brackets? How much for the parts and shipping to 43402? Thanks.

07-04-2011, 01:28 PM	#189
67gmcV8 Registered User Join Date: Jul 2011 Location: bridgeport, Il Posts: 2	Re: Parting a 1967 GMC 1/2 great parts to be had how much for the e-brake handle assembly

07-04-2011, 03:41 PM	#190
67gmcV8 Registered User Join Date: Jul 2011 Location: bridgeport, Il Posts: 2	Re: Parting a 1967 GMC 1/2 great parts to be had whats the cost to have it shipped to 62417

07-07-2011, 09:38 AM	#191
Low & Slow Registered User Join Date: May 2011 Location: Philly Pa Posts: 124	Re: Parting a 1967 GMC 1/2 great parts to be had Looking for the parking brake cables and brackets from the rear axle all the way to the handle. Everything to go on a bare frame. You're basically my last hope Shipping to 18066? Accept paypal?

07-07-2011, 01:32 PM	#194
1972hays Registered User Join Date: Feb 2011 Location: A****er ca Posts: 475	Re: Parting a 1967 GMC 1/2 great parts to be had Is the gauge cluster still for sale i read that the face is broken does it have the vac and does all of the gauge work __________________ 72 chevrolet 4wd 350/350 swb fleet green mean army machine

07-08-2011, 12:19 AM	#196
ROCKthe68 Registered User Join Date: Feb 2008 Location: Mission Viejo, CA Posts: 22	Re: Parting a 1967 GMC 1/2 great parts to be had Is there a high hump trans cover? __________________ TDY

07-25-2011, 01:38 AM	#198
hatred Registered User Join Date: Jun 2010 Location: Denham Springs, La. Posts: 257	Re: Parting a 1967 GMC 1/2 great parts to be had Can you send me pics of the doors please? Bottoms and any known problems? Thanks, Tony __________________ 05 QSM GTO - M6, Corsa, King Springs 70 SWB CST - 350/Auto, Foose 18/17 I upset whiners too....

07-26-2011, 01:43 AM	#199
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Parting a 1967 GMC 1/2 great parts to be had Do you still have the door panels and the glove box door with the gmc emblem? If so how much shipped __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**



Register or Log In To remove these advertisements.

07-26-2011, 07:11 PM	#200
69Mule Registered User Join Date: Jul 2011 Location: Valencia, CA Posts: 8	Re: Parting a 1967 GMC 1/2 great parts to be had I might be interested in the front upper and lower control arms.. Can you quote me a price and shipping to 91354?

Register or Log In To remove these advertisements.