Mesquite 1966 C10 - LS3 W/Air Ride - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**66ChevyMax** · 11-30-2011, 11:37 PM

Axles are in, wheel studs in, differental buttoned up, panhard bar installed.

**66ChevyMax** · 11-30-2011, 11:53 PM

This is offically a LS Swap build: LS3 Gen IV 6.2L (376cu in), aluminum block & heads, 430 hp @ 5,900rpm, 424 lb.-ft @4,600rpm, max rpm 6,600.

My oldest son and 5 of his friends were working on one of their trucks in the shop when I got home, after I uncrated this beauty there was a moment of silence

11-30-2011, 11:37 PM	#1
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 Axles are in, wheel studs in, differental buttoned up, panhard bar installed. __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

11-30-2011, 11:53 PM	#2
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 This is offically a LS Swap build: LS3 Gen IV 6.2L (376cu in), aluminum block & heads, 430 hp @ 5,900rpm, 424 lb.-ft @4,600rpm, max rpm 6,600. My oldest son and 5 of his friends were working on one of their trucks in the shop when I got home, after I uncrated this beauty there was a moment of silence __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.