No Limit's "K-10" - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aggie91 · 02-16-2012, 10:24 AM

Rob, That's looking real good. I dig the little extra you had the water jet do on your rack mount. The No Limit name right there in FRONT.

m6z · 02-16-2012, 01:17 PM

nice. great progress.

**robnolimit** · 02-17-2012, 08:36 PM

Yep, have to raise the rear openings too. I need to be able to pull a tire without to much work. I make the wheel opening lips in three pieces, well actually seven, but in three layers. The flat lip, and two for the radius edges.

**FRENCHBLUE72** · 02-17-2012, 08:39 PM

More updates **** I got to go get a beer...

**robnolimit** · 02-17-2012, 08:47 PM

here it is with the OE openings cut out, and the new shape in place.

**robnolimit** · 02-17-2012, 08:49 PM

this is the hard part to fit. I made a tape template first to get the shape, the trimmed the metal to fit.

**robnolimit** · 02-17-2012, 08:54 PM

I'm not even done working and I just had a beer.

duallyjams · 02-17-2012, 08:58 PM

Sounds good I think I'll grab me a beer.

**67cheby** · 02-17-2012, 10:18 PM

Wow looking cool
Posted via Mobile Device

**oldman3** · 02-17-2012, 11:11 PM

Cool....Jim

68 TT · 02-17-2012, 11:44 PM

Very nice. I like how you make the flares blend into the stock body lines. It really helps the flares not look tacked on like many do. Great work.

Dunenutt · 02-18-2012, 06:21 PM

It just keeps getting better!

Hurry up, Goodguys Scottsdale is Mar 9! The schedule says autocross

.

**robnolimit** · 02-20-2012, 08:38 PM

this is the finished pass side, only one left to do. The drivers side uncut. Drivers side opening with the lip on it.

**robnolimit** · 02-20-2012, 08:40 PM

Oops, another shot of the pass side rear. And with the tire in it at ride height. here is a shot of the goofy panhard rod set up, passing through the torque arm.

**robnolimit** · 02-20-2012, 08:41 PM

The axle mount for the panhard rod, this is my first real quichchange build, and it does add to the difficulty. The front mount of the torque arm has five positions to mount the link. When I assemble it for real, I'll put all the bearings and bushings in place, so that tuning will be easier.

**robnolimit** · 02-20-2012, 08:43 PM

This is the beggining of the fuel tank. Lots of baffles and traps. This is one of those parts that has to do many things. As well as the fuel tank, this has to act as an air deflector for the radiator, and allow access for the rear quickchange cover to swap gears.

**67cheby** · 02-20-2012, 08:52 PM

This thing is crazy cool
Posted via Mobile Device

jasonhall · 02-20-2012, 09:28 PM

very cool!

dnd1978 · 02-21-2012, 12:03 PM

I can not wait to see this truck on the track!

ferk_3131 · 02-23-2012, 12:22 AM

Any updates on the hood?
Posted via Mobile Device

mcbassin · 02-23-2012, 01:23 AM

Crazy metal fab skills! I'm loving all the cool designs. It would be cool to see what equipment you use to form and shape your metal. Tools I obviously don't have....

5150.4.67 · 02-23-2012, 03:47 AM

Did you switch to Winters hubs?

**robnolimit** · 02-23-2012, 11:17 AM

the front hubs are Wilwood, the rears are Speedway Eng.

**robnolimit** · 02-26-2012, 07:21 PM

Hang on to your hats, new picts coming. Saturday we re-assembleb most of the big parts. This was the last fit up. With everything together it was time to start the finish work. Tabs for everything, holes for everthing, mounting spots for everything....... this stuff moves pretty quick, but after a few full days of it, it still looks the same. Finally, we pulled it off of the build rack and set it on the ground. All I can say is, WOW!!!!

mooseknuckles · 02-26-2012, 07:24 PM

can't wait....make it soon...

02-16-2012, 10:24 AM	#376
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: No Limit's "K-10" Rob, That's looking real good. I dig the little extra you had the water jet do on your rack mount. The No Limit name right there in FRONT. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-16-2012, 01:17 PM	#377
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: No Limit's "K-10" nice. great progress. __________________ Doug Looking for a 67-72 short bed driver.....

02-17-2012, 08:36 PM	#378
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Yep, have to raise the rear openings too. I need to be able to pull a tire without to much work. I make the wheel opening lips in three pieces, well actually seven, but in three layers. The flat lip, and two for the radius edges. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-17-2012 at 11:14 PM.

02-17-2012, 08:39 PM	#379
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: No Limit's "K-10" More updates **** I got to go get a beer... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-17-2012, 08:47 PM	#380
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" here it is with the OE openings cut out, and the new shape in place. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-17-2012 at 11:16 PM.

02-17-2012, 08:49 PM	#381
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" this is the hard part to fit. I made a tape template first to get the shape, the trimmed the metal to fit. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-17-2012 at 11:18 PM.

02-17-2012, 08:54 PM	#382
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" I'm not even done working and I just had a beer. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-17-2012, 08:58 PM	#383
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: No Limit's "K-10" Sounds good I think I'll grab me a beer. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-17-2012, 10:18 PM	#384
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: No Limit's "K-10" Wow looking cool Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-17-2012, 11:11 PM	#385
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: No Limit's "K-10" Cool....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-17-2012, 11:44 PM	#386
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: No Limit's "K-10" Very nice. I like how you make the flares blend into the stock body lines. It really helps the flares not look tacked on like many do. Great work. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

02-18-2012, 06:21 PM	#387
Dunenutt Newbee Join Date: Jan 2010 Location: Phoenix, Arizona Posts: 1,406	Re: No Limit's "K-10" It just keeps getting better! Hurry up, Goodguys Scottsdale is Mar 9! The schedule says autocross. __________________ My Build, http://67-72chevytrucks.com/vboard/s...58#post4464158

02-20-2012, 08:38 PM	#388
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" this is the finished pass side, only one left to do. The drivers side uncut. Drivers side opening with the lip on it. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-20-2012 at 09:08 PM.

02-20-2012, 08:40 PM	#389
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Oops, another shot of the pass side rear. And with the tire in it at ride height. here is a shot of the goofy panhard rod set up, passing through the torque arm. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-20-2012 at 09:10 PM.

02-20-2012, 08:41 PM	#390
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" The axle mount for the panhard rod, this is my first real quichchange build, and it does add to the difficulty. The front mount of the torque arm has five positions to mount the link. When I assemble it for real, I'll put all the bearings and bushings in place, so that tuning will be easier. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-20-2012 at 09:13 PM.



Register or Log In To remove these advertisements.

02-20-2012, 08:43 PM	#391
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" This is the beggining of the fuel tank. Lots of baffles and traps. This is one of those parts that has to do many things. As well as the fuel tank, this has to act as an air deflector for the radiator, and allow access for the rear quickchange cover to swap gears. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 02-20-2012 at 09:19 PM.

02-20-2012, 08:52 PM	#392
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: No Limit's "K-10" This thing is crazy cool Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-20-2012, 09:28 PM	#393
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: No Limit's "K-10" very cool!

02-21-2012, 12:03 PM	#394
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: No Limit's "K-10" I can not wait to see this truck on the track! __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

02-23-2012, 12:22 AM	#395
ferk_3131 Registered User Join Date: Mar 2011 Location: Marysville, KS Posts: 9	Re: No Limit's "K-10" Any updates on the hood? Posted via Mobile Device

02-23-2012, 01:23 AM	#396
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: No Limit's "K-10" Crazy metal fab skills! I'm loving all the cool designs. It would be cool to see what equipment you use to form and shape your metal. Tools I obviously don't have.... __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-23-2012, 03:47 AM	#397
5150.4.67 Registered User Join Date: Dec 2007 Location: Modesto, Ca Posts: 411	Re: No Limit's "K-10" Did you switch to Winters hubs?

02-23-2012, 11:17 AM	#398
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" the front hubs are Wilwood, the rears are Speedway Eng. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-26-2012, 07:21 PM	#399
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit's "K-10" Hang on to your hats, new picts coming. Saturday we re-assembleb most of the big parts. This was the last fit up. With everything together it was time to start the finish work. Tabs for everything, holes for everthing, mounting spots for everything....... this stuff moves pretty quick, but after a few full days of it, it still looks the same. Finally, we pulled it off of the build rack and set it on the ground. All I can say is, WOW!!!! __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-26-2012, 07:24 PM	#400
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: No Limit's "K-10" can't wait....make it soon... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

Register or Log In To remove these advertisements.