CA 4x4 sway bar changeover - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 01-06-2012, 01:24 PM

I have a pair from a 69. $55 shipped.
Thanks,
Ray

67gmcstepside · 01-23-2012, 07:47 PM

Ray, i received the sway bar setup but the spring packs that came with it are 2 different sizes of which neither fits my existing setup. I have a 72 blazer 1/2 axle in front. Are these for the 3/4 ton setups only?

KrazyRay · 01-23-2012, 08:35 PM

They should all be the same. The plate on the passenger side is bigger to allow for the pumkin. Center to center of the holes should be 3 5/8" on three of them and 4 3/8" on one hole (the one up against the pumkin. Here's some pics of a 1/2 ton that I just pulled yesterday:

67gmcstepside · 01-23-2012, 08:44 PM

Thanks Ray, once it stops rainning i will try another trial fit.

2003 silverado · 03-05-2012, 04:49 PM

Ray iam in search of the brackets in post #94 As I have the plates mounted and the bar but my blazer never had the brackets. In a previouse post someone asked about a lift on there trk ,They sell disconnect links for the sway bar and it raises the sway bay two inches from the axel>Hope that helped him Let me know what you have ? Thanks Dave 19382

KrazyRay · 03-05-2012, 06:35 PM

Dave, Those are the tough pieces to get for the setup. You have to sacrafice a 4x4 square body frame to get them. Also, the front crossmember is a little different on a 72 so you might have to do some fab work to make it happen. I have a 77 crossmember with those brackets, but there is some welds that I had to cut that will need to be cleaned up...very useable. $65 shipped for the crossmember and brackets.
Thanks,
Ray

01-06-2012, 01:24 PM	#101
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 4x4 sway bar changeover I have a pair from a 69. $55 shipped. Thanks, Ray

01-23-2012, 07:47 PM	#102
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: 4x4 sway bar changeover Ray, i received the sway bar setup but the spring packs that came with it are 2 different sizes of which neither fits my existing setup. I have a 72 blazer 1/2 axle in front. Are these for the 3/4 ton setups only?

01-23-2012, 08:35 PM	#103
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 4x4 sway bar changeover They should all be the same. The plate on the passenger side is bigger to allow for the pumkin. Center to center of the holes should be 3 5/8" on three of them and 4 3/8" on one hole (the one up against the pumkin. Here's some pics of a 1/2 ton that I just pulled yesterday: Attached Images

01-23-2012, 08:44 PM	#104
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: 4x4 sway bar changeover Thanks Ray, once it stops rainning i will try another trial fit.

03-05-2012, 04:49 PM	#105
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: 4x4 sway bar changeover Ray iam in search of the brackets in post #94 As I have the plates mounted and the bar but my blazer never had the brackets. In a previouse post someone asked about a lift on there trk ,They sell disconnect links for the sway bar and it raises the sway bay two inches from the axel>Hope that helped him Let me know what you have ? Thanks Dave 19382 __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

03-05-2012, 06:35 PM	#106
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 4x4 sway bar changeover Dave, Those are the tough pieces to get for the setup. You have to sacrafice a 4x4 square body frame to get them. Also, the front crossmember is a little different on a 72 so you might have to do some fab work to make it happen. I have a 77 crossmember with those brackets, but there is some welds that I had to cut that will need to be cleaned up...very useable. $65 shipped for the crossmember and brackets. Thanks, Ray



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.