CA 15x10 slot mags new polish

[dozerman]

These are nice old wheels don't know brand just had repolished brand new lug nuts brand new spinners.400.00 + ship

[dozerman]

ttt

[dozerman]

ttt

[Husker]

Nice wheels, too bad they aren't 6 lug.
Ron

[dozerman]

I know but if they were 6-Lug I would keep them.Thanks

[dozerman]

ttt

[smokinstang70]

interested.... give me a few hours to review

[Husker]

How did you get them to shine like that?
Ron

[dozerman]

Ron, You have to sand the heck out of them first and have the right polisher.They look pretty nice for old cast wheels.

[trevrolet65]

Got a set of non polished six lug w/o spinners, wanna trade, you keep spinners and lugs?

[oldblue1968chevy]

Cleaning slot wheels:
1st. clean em up. I used oven cleaner and a scotch brite this time. followed with sos pad to get the cleaner off and any left over crud.

2nd. take care of any bumps and scars with agressive sanding. I had to use a file on the lips of a couple.

3rd. start sanding with 600 grit then graduate to 1000, then 1500, then 2000.
If you have a set thats not scared up like these you may be able to go strait to 1000. Usually don't have to spend alot of time with each grade, just enound to remove a fine layer of oxidized metal. The 2000 grit will tell the tale. And then your ready to polish.

4th. I used a buffer with fine cut compound and a sprinkle of water, then followed it with "mother's" on a cloth. could use a "powerball" if you have it. That might even work better.
that's it. It takes a little time, but I love to take something that looks used up and bring it back.

[Husker]

Thanks will try.
Ron

[dozerman]

Also another trick is when all do with finale polish wipe rim with laq. thinner on very soft cloth it will pull all the black out of the alum.Make alum.real brite and silver.

[jamesroy9289]

too bad I'm short on $$$, those are exactly what I've been looking for! Good luck selling them.

[sharpie1972]

Hi Doze, might be a stupid question, but are these 5 on 5 truck? Thanks, Sharpie

[smokinstang70]

Still interested... got a quote on shipping yet to 31312?

[smokinstang70]

Still interested.... lmk something. Thanks

[dozerman]

Must have missed this yes sharpie they are 5on 5 truck but I think they are uni.

[dozerman]

40.00 per wheel seems like alot probably kills any deal.

[smokinstang70]

Are the wheels still for sale? If so please let me know... Interested
Posted via Mobile Device

[kriswvu1202]

Question: Will 15x10 wheels fit under a stock front end without rubbing?

[chuckmc8]

if you have a truck stop in your area, they usually have a wheel polisher guy that does the big rigs that will do these for reasonable charge. I did the Alcoas on my MCI conversion bus myself and found out later that the truck stop guys have the right equip and knowledge to knock em right out. Those guys can make em look just like a mirror! (just like Dozerman's slots) they will also do other aluminum items for a 'reasonable' (6pack) tip.....