IL wtb Blazer passenger seat floor striker - The 1947 - Present Chevrolet & GMC Truck Message Board Network

briank · 06-23-2012, 01:38 PM

I am looking to buy the entire striker that attaches to the passenger fllor that the blazer flip up seat locks in to when it's in its resting postion. The shop manual calls it a striker. I have a 1972 if that makes a difference. Also looking for a rear upper hatch entire latch and handle mechanism, alos for a 1972.....thanks b.kramer58@yahoo.com

briank · 06-25-2012, 06:20 AM

Nobody has one? Can somebody steer me to a thread that has dimensions at least? Thanks
Posted via Mobile Device

**richard2717** · 06-25-2012, 08:07 AM

I will take a picture and some measurements when I get home tonight

Richard

briank · 06-25-2012, 01:25 PM

Thanks a lot
Posted via Mobile Device

**richard2717** · 06-25-2012, 06:18 PM

Brian,
Here are some pictures and measurements. If you need a better picture let me know. I was in a hurry earlier and did not have time to wait for the lights to come up to full brightness in the shop LOL . total of 12 pictures including 2 of hand drawn measurements

**richard2717** · 06-25-2012, 06:21 PM

five more

briank · 06-25-2012, 06:27 PM

That should work just fine, thanks a lot!

**richard2717** · 06-25-2012, 06:32 PM

1st picture is an arial view looking down at the bracket.the center section where the seat post goes down in looks like the only part that would be hard to duplicate. The top of the bevel is 1-1/8" circle and the actual opening is 5/8" the bevel looks to be 3/8" deep.

Name: 2012-06-25_18-11-37_928.jpg
Views: 159
Size: 32.1 KB

Name: 2012-06-25_18-11-37_928.jpg
Views: 159
Size: 32.1 KB

The bracket is 4.75" overall width.
The mounting holes to the floor are 3-3/8" center to center.
the floor plate closest to the passenger door is 1.5" wide
The floor plate closest to the transmission tunnel is 1.25" b/c of groove in floor
the center section is 2" wide
the center section rises 1.75" up off the floor
the bracket is 2" wide from dash to back seat direction

I forgot to measure but I think it was about 1/16 thick metal

Name: 2012-06-25_18-13-50_642.jpg
Views: 157
Size: 23.0 KB

Name: 2012-06-25_18-13-50_642.jpg
Views: 157
Size: 23.0 KB

Hope it helps

Richard

briank · 07-02-2012, 09:11 PM

Still looking , Ive made one but would rather have a factory piece.
Posted via Mobile Device

lopemaxx · 07-03-2012, 03:37 PM

brian talk to wasted income he is parting out a 72 cst and i am sure he would sell you the striker plate

71HUGGER396 · 07-03-2012, 03:59 PM

I just bought one from jaros44sr. I think he had another one. He is a great guy to deal with.

briank · 07-03-2012, 06:44 PM

Thanks guys, I'll try them.

woodymm3 · 07-03-2012, 07:09 PM

I may have an extra one. I think I found one when I was tinkering in my garage the other day. I will check tonight...

briank · 07-03-2012, 08:57 PM

Sounds good woodymm3
Posted via Mobile Device

woodymm3 · 07-05-2012, 05:05 PM

Sorry I got busy yesterday and forgot to check. I am making myself a note and will check this evening and post if I do or dont have one. What are these worth anyways?

woodymm3 · 07-10-2012, 06:54 PM

Yes I do have an extra one. I am not sure what they are going for though...

06-23-2012, 01:38 PM	#1
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	wtb Blazer passenger seat floor striker I am looking to buy the entire striker that attaches to the passenger fllor that the blazer flip up seat locks in to when it's in its resting postion. The shop manual calls it a striker. I have a 1972 if that makes a difference. Also looking for a rear upper hatch entire latch and handle mechanism, alos for a 1972.....thanks b.kramer58@yahoo.com

06-25-2012, 06:20 AM	#2
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: wtb Blazer passenger seat floor striker Nobody has one? Can somebody steer me to a thread that has dimensions at least? Thanks Posted via Mobile Device

06-25-2012, 08:07 AM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,061	Re: wtb Blazer passenger seat floor striker I will take a picture and some measurements when I get home tonight Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-25-2012, 01:25 PM	#4
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: wtb Blazer passenger seat floor striker Thanks a lot Posted via Mobile Device

06-25-2012, 06:18 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,061	Re: wtb Blazer passenger seat floor striker Brian, Here are some pictures and measurements. If you need a better picture let me know. I was in a hurry earlier and did not have time to wait for the lights to come up to full brightness in the shop LOL . total of 12 pictures including 2 of hand drawn measurements Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-25-2012, 06:21 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,061	Re: wtb Blazer passenger seat floor striker five more Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-25-2012, 06:27 PM	#7
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: wtb Blazer passenger seat floor striker That should work just fine, thanks a lot!

06-25-2012, 06:32 PM	#8
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,061	Re: wtb Blazer passenger seat floor striker 1st picture is an arial view looking down at the bracket.the center section where the seat post goes down in looks like the only part that would be hard to duplicate. The top of the bevel is 1-1/8" circle and the actual opening is 5/8" the bevel looks to be 3/8" deep. The bracket is 4.75" overall width. The mounting holes to the floor are 3-3/8" center to center. the floor plate closest to the passenger door is 1.5" wide The floor plate closest to the transmission tunnel is 1.25" b/c of groove in floor the center section is 2" wide the center section rises 1.75" up off the floor the bracket is 2" wide from dash to back seat direction I forgot to measure but I think it was about 1/16 thick metal Hope it helps Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-02-2012, 09:11 PM	#9
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: wtb Blazer passenger seat floor striker Still looking , Ive made one but would rather have a factory piece. Posted via Mobile Device

07-03-2012, 03:37 PM	#10
lopemaxx Registered User Join Date: Feb 2012 Location: Billings, MT Posts: 78	Re: wtb Blazer passenger seat floor striker brian talk to wasted income he is parting out a 72 cst and i am sure he would sell you the striker plate __________________ 70 Chevelle SS (clone), 454, 350 auto 71 K5 350, 350 auto, 3" body lift, 35's -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|____\|__\|___] ......_@_ _ _ _ @

07-03-2012, 03:59 PM	#11
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Re: wtb Blazer passenger seat floor striker I just bought one from jaros44sr. I think he had another one. He is a great guy to deal with. __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

07-03-2012, 06:44 PM	#12
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: wtb Blazer passenger seat floor striker Thanks guys, I'll try them.

07-03-2012, 07:09 PM	#13
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: wtb Blazer passenger seat floor striker I may have an extra one. I think I found one when I was tinkering in my garage the other day. I will check tonight...

07-03-2012, 08:57 PM	#14
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: wtb Blazer passenger seat floor striker Sounds good woodymm3 Posted via Mobile Device

07-05-2012, 05:05 PM	#15
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: wtb Blazer passenger seat floor striker Sorry I got busy yesterday and forgot to check. I am making myself a note and will check this evening and post if I do or dont have one. What are these worth anyways?



Register or Log In To remove these advertisements.

07-10-2012, 06:54 PM	#16
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: wtb Blazer passenger seat floor striker Yes I do have an extra one. I am not sure what they are going for though...

Register or Log In To remove these advertisements.