TX 15x8 wheels for small hub cap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RanchFlyer · 09-29-2011, 10:17 PM

I have two 15x8 steel wheels 5on5 bolt circle. These have the nubs on the center section for dog dish caps. I have held onto these for long enough they need a new home. They were wire brushed this week. Before a debate starts I do NOT believe these to be factory installed. As a matter of fact you can still make out the shipping address from when they were shipped to a local tire store around 1976 as stated by PO. I would like to get $100 local. Will ship at the buyers expense from zip code 75701. Thanks Darrin

RanchFlyer · 10-01-2011, 03:30 PM

weekend bump

**Tim Christian** · 10-01-2011, 07:32 PM

Man I really need these but were I just bought the 1970 cash flow to low. Although I do already have two just like them!!!!

**72 Super** · 10-01-2011, 07:57 PM

Darrin, could I get a shipping quote to Maryland 20781

Thanks,
Ray

**Tim Christian** · 10-01-2011, 08:28 PM

Hey Darrin, Go ahead and get me a quote also if 72Super passes. To a bussiness 24502 The wife will kill me but you only live once!!!!!!

RanchFlyer · 10-01-2011, 09:01 PM

72 super It looks like shipping to you would be about $50 via ups

RanchFlyer · 10-01-2011, 09:09 PM

72 super It looks like shipping to you would be about $50 via ups Or $42 parcel post USPS

**Tim Christian** · 10-01-2011, 09:15 PM

I will take them if 72 Super passes.

RanchFlyer · 10-01-2011, 09:24 PM

Tim it looks like UPS will be $41 and usps is about $36

**72 Super** · 10-01-2011, 09:46 PM

Darrin,

I will past them on to Tim. I wouldn't mind having them, but I don't really have a use for them at the moment.

Thanks,
Ray

**Tim Christian** · 10-01-2011, 10:02 PM

Thanks Ray. This will give me a complete set. Now to install some tires and the caps I got from Frank!

Darrin, Please PM me with payment info. Thanks Tim

RanchFlyer · 10-01-2011, 10:26 PM

Thanks for looking these are pending payment from Tim

Leroy-B1 · 10-01-2011, 10:44 PM

will take if something happens

RanchFlyer · 10-01-2011, 10:54 PM

Sold and payed for. Going to a new home. Thanks to all who have looked and asked questions Darrin

**72 Super** · 10-02-2011, 10:21 AM

Quote:

Originally Posted by Tim Christian

Thanks Ray. This will give me a complete set. Now to install some tires and the caps I got from Frank!

Darrin, Please PM me with payment info. Thanks Tim

You are welcome Tim! I see you really wanted and will put them to go use.

Ray

**WIDESIDE72** · 07-21-2012, 01:58 AM

anyone else know where I can get a pair like this?

**leddzepp** · 07-21-2012, 02:22 AM

Quote:

Originally Posted by WIDESIDE72

anyone else know where I can get a pair like this?

ditto.
Posted via Mobile Device

DesertCat · 07-21-2012, 02:23 AM

Quote:

Originally Posted by WIDESIDE72

anyone else know where I can get a pair like this?

Yeah... I got these and am very happy with them

http://67-72chevytrucks.com/vboard/s...ight=vintiques

**special-K** · 07-21-2012, 08:40 AM

These are tough to find. I guess you can get the new ones from Wheel Vintiques. I lucked into my set about 6 years ago.I actually posted a WTB and Uncle responded.

Malamute · 07-21-2012, 08:43 AM

I can't find any of those in 6 lug at WV. I really want steel wheels in a 15x8 but after a lot of back and forth I would like to keep my 6 lug as I don't want to replace the rear end. Any ideas on where to find some in 6 lug?

**PICKMUP** · 07-21-2012, 11:33 AM

Quote:

Originally Posted by Malamute

I can't find any of those in 6 lug at WV. I really want steel wheels in a 15x8 but after a lot of back and forth I would like to keep my 6 lug as I don't want to replace the rear end. Any ideas on where to find some in 6 lug?

There was a set for sale on this board a few days ago...about $300

Malamute · 07-21-2012, 11:56 AM

Quote:

Originally Posted by PICKMUP

There was a set for sale on this board a few days ago...about $300

Found them, thanks. Too bad they sold already. At least I know that they are out there, will start the search locally.

**WIDESIDE72** · 07-21-2012, 03:20 PM

THis AM I found Wheel Vintique 15 x 8 5x5 8" wide on Summitracing.com for around $86 each. I am pretty sure they had 6 lug as well. Most web sites that I found wheels at had 6 lug not 5.

Malamute · 07-21-2012, 06:21 PM

Quote:

Originally Posted by WIDESIDE72

THis AM I found Wheel Vintique 15 x 8 5x5 8" wide on Summitracing.com for around $86 each. I am pretty sure they had 6 lug as well. Most web sites that I found wheels at had 6 lug not 5.

Thanks, I'll check Summit.

**special-K** · 07-22-2012, 08:10 AM

The 6-lugs are far more common than 5-lug as they were used for years on 4wds,as well as all CUCV Blazers and aftermarket. I need to find a pair of 10" wide 5-lug. I don't think Wheel Vintiques make those,either. If they do make the 8" in a 5 on 5,could someone post a direct link? A link to their entire list of wheels is too overwhelming,and although I looked over the entire thing,I never found any.

09-29-2011, 10:17 PM	#1
RanchFlyer Registered User Join Date: Jan 2010 Location: Flint, TX Posts: 147	15x8 wheels for small hub cap I have two 15x8 steel wheels 5on5 bolt circle. These have the nubs on the center section for dog dish caps. I have held onto these for long enough they need a new home. They were wire brushed this week. Before a debate starts I do NOT believe these to be factory installed. As a matter of fact you can still make out the shipping address from when they were shipped to a local tire store around 1976 as stated by PO. I would like to get $100 local. Will ship at the buyers expense from zip code 75701. Thanks Darrin Attached Images

10-01-2011, 03:30 PM	#2
RanchFlyer Registered User Join Date: Jan 2010 Location: Flint, TX Posts: 147	Re: 15x8 wheels for small hub cap weekend bump

10-01-2011, 07:32 PM	#3
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: 15x8 wheels for small hub cap Man I really need these but were I just bought the 1970 cash flow to low. Although I do already have two just like them!!!!

10-01-2011, 07:57 PM	#4
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Re: 15x8 wheels for small hub cap Darrin, could I get a shipping quote to Maryland 20781 Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

10-01-2011, 08:28 PM	#5
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: 15x8 wheels for small hub cap Hey Darrin, Go ahead and get me a quote also if 72Super passes. To a bussiness 24502 The wife will kill me but you only live once!!!!!!

10-01-2011, 09:01 PM	#6
RanchFlyer Registered User Join Date: Jan 2010 Location: Flint, TX Posts: 147	Re: 15x8 wheels for small hub cap 72 super It looks like shipping to you would be about $50 via ups

10-01-2011, 09:09 PM	#7
RanchFlyer Registered User Join Date: Jan 2010 Location: Flint, TX Posts: 147	Re: 15x8 wheels for small hub cap 72 super It looks like shipping to you would be about $50 via ups Or $42 parcel post USPS Last edited by RanchFlyer; 10-01-2011 at 09:13 PM. Reason: add usps

10-01-2011, 09:15 PM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: 15x8 wheels for small hub cap I will take them if 72 Super passes.

10-01-2011, 09:24 PM	#9
RanchFlyer Registered User Join Date: Jan 2010 Location: Flint, TX Posts: 147	Re: 15x8 wheels for small hub cap Tim it looks like UPS will be $41 and usps is about $36

10-01-2011, 09:46 PM	#10
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Re: 15x8 wheels for small hub cap Darrin, I will past them on to Tim. I wouldn't mind having them, but I don't really have a use for them at the moment. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

10-01-2011, 10:02 PM	#11
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: 15x8 wheels for small hub cap Thanks Ray. This will give me a complete set. Now to install some tires and the caps I got from Frank! Darrin, Please PM me with payment info. Thanks Tim

10-01-2011, 10:26 PM	#12
RanchFlyer Registered User Join Date: Jan 2010 Location: Flint, TX Posts: 147	Re: 15x8 wheels for small hub cap Thanks for looking these are pending payment from Tim

10-01-2011, 10:44 PM	#13
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 15x8 wheels for small hub cap will take if something happens

10-01-2011, 10:54 PM	#14
RanchFlyer Registered User Join Date: Jan 2010 Location: Flint, TX Posts: 147	Re: 15x8 wheels for small hub cap Sold and payed for. Going to a new home. Thanks to all who have looked and asked questions Darrin

07-21-2012, 01:58 AM	#16
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 15x8 wheels for small hub cap anyone else know where I can get a pair like this?



Register or Log In To remove these advertisements.

07-21-2012, 08:40 AM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 15x8 wheels for small hub cap These are tough to find. I guess you can get the new ones from Wheel Vintiques. I lucked into my set about 6 years ago.I actually posted a WTB and Uncle responded. Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-21-2012, 08:43 AM	#20
Malamute Registered User Join Date: Sep 2011 Location: Louisville, KY Posts: 756	Re: 15x8 wheels for small hub cap I can't find any of those in 6 lug at WV. I really want steel wheels in a 15x8 but after a lot of back and forth I would like to keep my 6 lug as I don't want to replace the rear end. Any ideas on where to find some in 6 lug?

07-21-2012, 03:20 PM	#23
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 15x8 wheels for small hub cap THis AM I found Wheel Vintique 15 x 8 5x5 8" wide on Summitracing.com for around $86 each. I am pretty sure they had 6 lug as well. Most web sites that I found wheels at had 6 lug not 5.

07-22-2012, 08:10 AM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 15x8 wheels for small hub cap The 6-lugs are far more common than 5-lug as they were used for years on 4wds,as well as all CUCV Blazers and aftermarket. I need to find a pair of 10" wide 5-lug. I don't think Wheel Vintiques make those,either. If they do make the 8" in a 5 on 5,could someone post a direct link? A link to their entire list of wheels is too overwhelming,and although I looked over the entire thing,I never found any. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.