KS rear disc brake templates and drawings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hilljob26** · 08-20-2012, 08:05 PM

well, i was cleanin out the closet and found a package of rear disc brake templates and instructions so you can make your own rear disc brakes for your 12 bolt and 10 bolt axles. I have a few, I used to sell these back in the day...You can basically build your own rear disc brakes for around 100 bucks when you use these patterns,,thats what it was when i did mine,,prices could have changed. 20 bucks shipped Many people have used them,I even had the on my old truck

the parts that i used are
front rotors off of an 88 chevy 1/2 ton 4x4
rear disc calipers off of a 83 camaro
pads off of a 88 s-10

**hilljob26** · 08-20-2012, 08:30 PM

there is a parts list also

chopnchaneled · 08-21-2012, 08:55 AM

I'll take it if a postal money order is ok?
Please pm me with your mailing address.
Thanks
Joe

chad64chevy · 08-21-2012, 09:50 AM

i'll take it, maybe you can scan them and make me a set! lmk

**hilljob26** · 08-21-2012, 01:20 PM

I have plenty left, and if I need more, I can get more made

**hilljob26** · 08-21-2012, 01:55 PM

chad64chevy..yours on on there way

chopnchaneled · 08-21-2012, 02:13 PM

Payment on the way, PM ed ya.
Thanks
Joe

**hilljob26** · 08-21-2012, 02:24 PM

got em ready to go joe..thanx again

**FIREBALL** · 08-21-2012, 02:58 PM

pm sent!

**hilljob26** · 08-21-2012, 03:52 PM

back at ya

72Blazing · 08-21-2012, 05:46 PM

I will take one. Pm payment info.
Thanks
Posted via Mobile Device

**hilljob26** · 08-21-2012, 09:41 PM

2 more out the door tomorrow..thanx guys

mikeoj · 08-21-2012, 10:16 PM

I'll take one.PM payment info.Have paypal.Thanks,Mike

**hilljob26** · 08-21-2012, 11:13 PM

thanx kurt and chris,,ship em out tomorrow

diabloceto · 08-21-2012, 11:19 PM

I'll take a set if you got any left?

Diabloceto

**hilljob26** · 08-21-2012, 11:30 PM

yep..got plenty..my paypal is hilljob26@yahoo.com ..as soon as i see the payment hit, i will get em out

**hilljob26** · 08-22-2012, 02:03 PM

thanx again richard,,be in the mail today

**hilljob26** · 08-22-2012, 06:04 PM

thanx mike,,yours will go out tomorrow

c1069 · 08-22-2012, 09:57 PM

you know if these brackets will work with late 70's seville rear calipers?

**hilljob26** · 08-22-2012, 10:16 PM

i know they work on 10 bolt and 12 bolt rearends...im sure you could modify the mounting holes if needed..just remove your axle and make a template of the mount on your rearend and line it up with the template i send you,make adjustments there

aidans70 · 08-23-2012, 12:19 PM

would you ship to canada?

**hilljob26** · 08-23-2012, 01:09 PM

as long as they get mail in canada..lol..

67chevy1series · 08-23-2012, 02:16 PM

i would like one. what calipers and rotors do you buy from yourt local parts store? what hose do you get? and my last question is, what caliper can you get so you have ebrake cables? thanks.

**hilljob26** · 08-23-2012, 03:04 PM

its all in the drawings,,tells you what years of everything you will need

afcamaro · 08-23-2012, 05:32 PM

Does this also tell you what master cylinder to switch to as well etc?

08-20-2012, 08:05 PM	#1
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	rear disc brake templates and drawings well, i was cleanin out the closet and found a package of rear disc brake templates and instructions so you can make your own rear disc brakes for your 12 bolt and 10 bolt axles. I have a few, I used to sell these back in the day...You can basically build your own rear disc brakes for around 100 bucks when you use these patterns,,thats what it was when i did mine,,prices could have changed. 20 bucks shipped Many people have used them,I even had the on my old truck the parts that i used are front rotors off of an 88 chevy 1/2 ton 4x4 rear disc calipers off of a 83 camaro pads off of a 88 s-10 __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343 Last edited by hilljob26; 02-26-2013 at 02:31 PM.

08-20-2012, 08:30 PM	#2
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings there is a parts list also __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-21-2012, 08:55 AM	#3
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: rear disc brake templates and drawings I'll take it if a postal money order is ok? Please pm me with your mailing address. Thanks Joe __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

08-21-2012, 09:50 AM	#4
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: rear disc brake templates and drawings i'll take it, maybe you can scan them and make me a set! lmk __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

08-21-2012, 01:20 PM	#5
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings I have plenty left, and if I need more, I can get more made __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-21-2012, 01:55 PM	#6
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings chad64chevy..yours on on there way __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-21-2012, 02:13 PM	#7
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: rear disc brake templates and drawings Payment on the way, PM ed ya. Thanks Joe __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

08-21-2012, 02:24 PM	#8
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings got em ready to go joe..thanx again __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-21-2012, 02:58 PM	#9
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: rear disc brake templates and drawings pm sent! __________________ Live life one day at a time!

08-21-2012, 03:52 PM	#10
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings back at ya __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-21-2012, 05:46 PM	#11
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: rear disc brake templates and drawings I will take one. Pm payment info. Thanks Posted via Mobile Device

08-21-2012, 09:41 PM	#12
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings 2 more out the door tomorrow..thanx guys __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-21-2012, 10:16 PM	#13
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Re: rear disc brake templates and drawings I'll take one.PM payment info.Have paypal.Thanks,Mike __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

08-21-2012, 11:13 PM	#14
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings thanx kurt and chris,,ship em out tomorrow __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-21-2012, 11:19 PM	#15
diabloceto Registered User Join Date: Dec 2010 Location: Byron, Ga Posts: 92	Re: rear disc brake templates and drawings I'll take a set if you got any left? Diabloceto



Register or Log In To remove these advertisements.

08-21-2012, 11:30 PM	#16
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings yep..got plenty..my paypal is hilljob26@yahoo.com ..as soon as i see the payment hit, i will get em out __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-22-2012, 02:03 PM	#17
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings thanx again richard,,be in the mail today __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-22-2012, 06:04 PM	#18
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings thanx mike,,yours will go out tomorrow __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-22-2012, 09:57 PM	#19
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: rear disc brake templates and drawings you know if these brackets will work with late 70's seville rear calipers? __________________ Pancho 69 c/10 step side 454/400 with 3.07

08-22-2012, 10:16 PM	#20
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings i know they work on 10 bolt and 12 bolt rearends...im sure you could modify the mounting holes if needed..just remove your axle and make a template of the mount on your rearend and line it up with the template i send you,make adjustments there __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-23-2012, 12:19 PM	#21
aidans70 Registered User Join Date: Mar 2012 Location: calgary, alberta Posts: 15	Re: rear disc brake templates and drawings would you ship to canada?

08-23-2012, 01:09 PM	#22
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings as long as they get mail in canada..lol.. __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-23-2012, 02:16 PM	#23
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: rear disc brake templates and drawings i would like one. what calipers and rotors do you buy from yourt local parts store? what hose do you get? and my last question is, what caliper can you get so you have ebrake cables? thanks.

08-23-2012, 03:04 PM	#24
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: rear disc brake templates and drawings its all in the drawings,,tells you what years of everything you will need __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-23-2012, 05:32 PM	#25
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: rear disc brake templates and drawings Does this also tell you what master cylinder to switch to as well etc?

Register or Log In To remove these advertisements.