Which gears you running?

[blazer2007]

Originally Posted by Firebirdjones

Not enough of a change in my opinion to warrant all the work and money involved.

how foolish of me.

[Firebirdjones]

[Krwright]

Originally Posted by '82 steppin

With the stock 350ci and 3600stall its around 2200-2400rpm on 295/50/15 and now Im building a 383ci with lots of mods and the cam operation is 3500-7000 thats why I was thinking of changing gears to help little bit
Posted via Mobile Device

That tranny won't live long cruising at 2200 with a 3600 stall.
Posted via Mobile Device

[tx512]

i have a th350 with 3.73 and I just down sized from 305/40/22 to a 275/60/15 the downsize isnt horribly bad, then again its only been 3 days.

I'm gonna drive it for a little while before i decide what route to go tranny wise.

I have a comp xe268 with vortec heads....

[Firebirdjones]

Originally Posted by tx512

i have a th350 with 3.73 and I just down sized from 305/40/22 to a 275/60/15 the downsize isnt horribly bad, then again its only been 3 days.

I'm gonna drive it for a little while before i decide what route to go tranny wise.

I have a comp xe268 with vortec heads....

I've run that exact tire and rear gear for years. That's a 28" tall tire and with the 3.73's I find it very comfortable. 65 mph is ~2800 rpms.

[KQQL IT]

9"with a 3:82 with a 28" tire 3500verter 4k down the freeway.
no stereo required...
Posted via Mobile Device

[motornut]

79 stock block 3052B -350 tranny rear end is a 3.4 locker