MO A few parts from the latest 69 we drug in... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 12-15-2012, 03:26 PM

We just went and picked up a 69 longbed and are starting to violate it. It is kind of odd, it is an air cab but has a heater only box. It has 71 - 72 style gas pedal.. Oh well, we all know how these things can get. Here goes..

PRICE REDUCED.... Power block, over by the battery.... $5.00 shipped.
PRICE REDUCED.... Horn, did not clean it up but tested and does work.... $10.00 shipped.SOLD,,,, THANKS....
PRICE REDUCED.... Hood bowtie. not show quality but not too bad.... $8.00 shipped.SOLD,,,, THANKS....

This is the first of a lot we will be listing so if you need anything particular, just ask. Truck was V8, 3 ott. Thanks, Fred

nobolt · 12-15-2012, 03:31 PM

hi fred, how bad or good is the rust in the cab? you know, the "usual places"?

**specialtyretail** · 12-15-2012, 03:45 PM

Quote:

Originally Posted by nobolt

hi fred, how bad or good is the rust in the cab? you know, the "usual places"?

Like you said, usual places, plus above windshield. Cab corners, rockers, typical rust everywhere.

nobolt · 12-15-2012, 03:51 PM

hummm, ok. it was worth asking. i already have one like that

thanks for the reply

Rickey · 12-15-2012, 04:51 PM

what you asking for the gas pedal and cable and what condition is the grill

Rickey

nobolt · 12-15-2012, 04:57 PM

i could use the wiring harness and bracket...if it had a radio

**specialtyretail** · 12-15-2012, 05:21 PM

Quote:

Originally Posted by Rickey

what you asking for the gas pedal and cable and what condition is the grill

Rickey

GRILL IS SOLD,,,,, THANKS.... Hey Rickey. Just listed the gas pedal assembly for $35.00 shipped. here are some pics of the grill. It aint much but would beat a blank. I think shipping would be pretty tough, but here it is. Thanks, Fred

**zicc1835** · 12-15-2012, 05:27 PM

any interest in parting the drivers side bed side if so better pics tail light area wheel well etc. mine is solid but needs lots of massaging

**specialtyretail** · 12-15-2012, 05:37 PM

Quote:

Originally Posted by zicc1835

any interest in parting the drivers side bed side if so better pics tail light area wheel well etc. mine is solid but needs lots of massaging

Here is what it is. The wheel opening area looks really nice.

**WETOWM** · 12-15-2012, 05:38 PM

I would be intrested in the parking light asmp l& r also the inner grill to outer shell retainers

**specialtyretail** · 12-15-2012, 06:10 PM

Quote:

Originally Posted by WETOWM

I would be intrested in the parking light asmp l& r also the inner grill to outer shell retainers

SOLD,,,, THANKS.... Just went out and removed them. They look very nice, lenses clear and pigtails intact. $37.00 shipped for the pair. Thanks, Fred

nobolt · 12-15-2012, 06:22 PM

if the fenders are bad i could use a patch from each side, along the hood. let me know and i will measure if needed. also the back up light assemblies and lenses.

orange 69 · 12-15-2012, 06:48 PM

Fred, How much are you asking for the wheels? Are they 6 Lug?
How bad is the tailgate?

**specialtyretail** · 12-15-2012, 07:00 PM

Quote:

Originally Posted by orange 69

Fred, How much are you asking for the wheels? Are they 6 Lug?
How bad is the tailgate?

Hey Joe. Yes, they are six lug and the other one is in the bed. I think they are American Racing but am not sure. Am going to try to get $150.00 for the set. The tailgate is very rusty but it will fill a hole, that is about all you can say about it. Thanks, Fred

**specialtyretail** · 12-15-2012, 07:01 PM

Quote:

Originally Posted by nobolt

if the fenders are bad i could use a patch from each side, along the hood. let me know and i will measure if needed. also the back up light assemblies and lenses.

SOLD,,,, THANKS.... Not really wanting to cut up the fenders. The back up lamp assemblies are no problem. lenses arent that great but we have the lens screws. $15.00 shipped. Thanks, Fred

nobolt · 12-15-2012, 07:10 PM

do you want PP or m.o? i'll send a PM with my shipping info. thanks

sjarrett71 · 12-15-2012, 08:27 PM

How much for the trailer hitch picked up? And are the heater controls just for heater or for A/C? If heater only what kind of shape are they in?

CMH77 · 12-15-2012, 09:00 PM

do you have a price on the grill? curious as to what shipping might be to 62704.

**specialtyretail** · 12-15-2012, 10:15 PM

Quote:

Originally Posted by nobolt

do you want PP or m.o? i'll send a PM with my shipping info. thanks

pm replied sent. Thanks, Fred.

**specialtyretail** · 12-15-2012, 10:16 PM

Quote:

Originally Posted by sjarrett71

How much for the trailer hitch picked up? And are the heater controls just for heater or for A/C? If heater only what kind of shape are they in?

Hey Scott. You pull it, $50.00. It looks like it is a beast of a hitch. The heater controls are heater only and they look pretty cobbled. Will look closer Sunday. Thanks, Fred

**specialtyretail** · 12-15-2012, 10:18 PM

Quote:

Originally Posted by CMH77

do you have a price on the grill? curious as to what shipping might be to 62704.

Hey there. Not really wanting to ship the grill right now. Thanks, Fred.

sjarrett71 · 12-15-2012, 10:46 PM

If I could get pictures of the two maybe we can work something out. Thanks.

**specialtyretail** · 12-15-2012, 10:54 PM

Quote:

Originally Posted by sjarrett71

If I could get pictures of the two maybe we can work something out. Thanks.

Sure thing. Will get you a few Sunday morning. Thanks, Fred

PAWS 72 · 12-16-2012, 11:25 AM

I'm not needing a hitch but the E-Z LIFT hitches are one of the best I think.we sold them all the time when I was at the camper lot.

Clean it up and use it.

**specialtyretail** · 12-16-2012, 12:03 PM

Quote:

Originally Posted by PAWS 72

I'm not needing a hitch but the E-Z LIFT hitches are one of the best I think.we sold them all the time when I was at the camper lot.

Clean it up and use it.

Thanks for the info. Looks pretty well made.

12-15-2012, 03:26 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	A few parts from the latest 69 we drug in... We just went and picked up a 69 longbed and are starting to violate it. It is kind of odd, it is an air cab but has a heater only box. It has 71 - 72 style gas pedal.. Oh well, we all know how these things can get. Here goes.. PRICE REDUCED.... Power block, over by the battery.... $5.00 shipped. PRICE REDUCED.... Horn, did not clean it up but tested and does work.... $10.00 shipped.SOLD,,,, THANKS.... PRICE REDUCED.... Hood bowtie. not show quality but not too bad.... $8.00 shipped.SOLD,,,, THANKS.... This is the first of a lot we will be listing so if you need anything particular, just ask. Truck was V8, 3 ott. Thanks, Fred Attached Images Last edited by specialtyretail; 01-09-2013 at 11:50 AM.

12-15-2012, 03:31 PM	#2
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: A few parts from the latest 69 we drug in... hi fred, how bad or good is the rust in the cab? you know, the "usual places"? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-15-2012, 03:51 PM	#4
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: A few parts from the latest 69 we drug in... hummm, ok. it was worth asking. i already have one like that thanks for the reply __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-15-2012, 04:51 PM	#5
Rickey Registered User Join Date: Jun 2007 Location: Kaufman TX Posts: 160	Re: A few parts from the latest 69 we drug in... what you asking for the gas pedal and cable and what condition is the grill Rickey

12-15-2012, 04:57 PM	#6
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: A few parts from the latest 69 we drug in... i could use the wiring harness and bracket...if it had a radio __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-15-2012, 05:27 PM	#8
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,144	Re: A few parts from the latest 69 we drug in... any interest in parting the drivers side bed side if so better pics tail light area wheel well etc. mine is solid but needs lots of massaging __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

12-15-2012, 05:38 PM	#10
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,100	Re: A few parts from the latest 69 we drug in... I would be intrested in the parking light asmp l& r also the inner grill to outer shell retainers

12-15-2012, 06:22 PM	#12
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: A few parts from the latest 69 we drug in... if the fenders are bad i could use a patch from each side, along the hood. let me know and i will measure if needed. also the back up light assemblies and lenses. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-15-2012, 06:48 PM	#13
orange 69 Registered User Join Date: Aug 2011 Location: Benton Arkansas Posts: 129	Re: A few parts from the latest 69 we drug in... Fred, How much are you asking for the wheels? Are they 6 Lug? How bad is the tailgate? __________________ Thanks Joe Hester

12-15-2012, 07:10 PM	#16
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: A few parts from the latest 69 we drug in... do you want PP or m.o? i'll send a PM with my shipping info. thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-15-2012, 08:27 PM	#17
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: A few parts from the latest 69 we drug in... How much for the trailer hitch picked up? And are the heater controls just for heater or for A/C? If heater only what kind of shape are they in? __________________ -Scott- Last edited by sjarrett71; 12-15-2012 at 10:01 PM.

12-15-2012, 09:00 PM	#18
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: A few parts from the latest 69 we drug in... do you have a price on the grill? curious as to what shipping might be to 62704.

12-15-2012, 10:46 PM	#22
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: A few parts from the latest 69 we drug in... If I could get pictures of the two maybe we can work something out. Thanks. __________________ -Scott-

12-16-2012, 11:25 AM	#24
PAWS 72 Registered User Join Date: Nov 2011 Location: Sheffield, ALA Posts: 2,471	Re: A few parts from the latest 69 we drug in... I'm not needing a hitch but the E-Z LIFT hitches are one of the best I think.we sold them all the time when I was at the camper lot. Clean it up and use it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.