86 Silverado Engine Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

02 Blue Thunder · 10-29-2003, 04:41 PM

I was wondering if it is possible to take an 86 305 and replace it with an 02 5.3? Has anyone done this, and if so what problems and mods would be expected. Thanks,

Kyle

87 STEPPER · 10-29-2003, 04:59 PM

I don't think anyone here has done it but im shure theres a 73-87 out there with a 5.3 in it.

You may have better luck posting this on the engine & drivetrain board.

Oh yeah welcome to the board

gldevall · 10-29-2003, 05:54 PM

Anything can be done...almost.

**old Rusty C10** · 10-29-2003, 06:42 PM

im sure it can be done but id check with the dealer they would know too

*1FaastC10* · 10-29-2003, 06:47 PM

screw the dealer, they'll tell you that you cannot do it, becuase GM didnt offer the parts to ut it in, some stuff has to be fabricated. if you cant do it, why does N2Trux have an LS1 in his Blazer?

Cole's 87 · 10-29-2003, 07:10 PM

well there you it can be done since the 5.3 is a cast iron version of a LS-1

10-29-2003, 04:41 PM	#1
02 Blue Thunder Registered User Join Date: Oct 2003 Posts: 1	86 Silverado Engine Conversion I was wondering if it is possible to take an 86 305 and replace it with an 02 5.3? Has anyone done this, and if so what problems and mods would be expected. Thanks, Kyle

10-29-2003, 04:59 PM	#2
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	I don't think anyone here has done it but im shure theres a 73-87 out there with a 5.3 in it. You may have better luck posting this on the engine & drivetrain board. Oh yeah welcome to the board __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE

10-29-2003, 05:54 PM	#3
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Anything can be done...almost. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

10-29-2003, 06:42 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,275	im sure it can be done but id check with the dealer they would know too __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-29-2003, 06:47 PM	#5
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	screw the dealer, they'll tell you that you cannot do it, becuase GM didnt offer the parts to ut it in, some stuff has to be fabricated. if you cant do it, why does N2Trux have an LS1 in his Blazer?

10-29-2003, 07:10 PM	#6
Cole's 87 Registered User Join Date: Nov 2002 Posts: 272	well there you it can be done since the 5.3 is a cast iron version of a LS-1



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.