anybody need parts off this 250 6-cylinder? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 10-28-2003, 12:02 PM

It's out of my donor truck. Was running. Not sure of year.
Has 3-bolt outlet exhaust manifold ($40 + ship), and HEI distributor ($20 + ship).
Email me at carpediem_00@yahoo.com - please, no pm's - if you need any other parts off it.

superchevy · 10-28-2003, 12:03 PM

pic2

superchevy · 10-28-2003, 12:04 PM

pic3

**burb71** · 10-28-2003, 04:58 PM

I dont think that my Email is geting out to you
I want if it will fit a 292 the exaust manifold, do you know if it will
Also I need the front and rear motor lift out brackets
Did this truck have power sreering? If so I want it too

**BIG ORANGE** · 10-28-2003, 06:20 PM

The 292 mainofold will be the same the only difference is on the inside. I use't race 6cly back in the late 70's and we ran 6bangers and we always wanted to run the 292 mainofold on our 250 engines.
How much for the carb. 29720?

superchevy · 10-29-2003, 10:09 AM

Exhaust manifold and lift brackets are sold.
Big Orange, $5 + ship for the carb.
Let me know,
SC

superchevy · 10-29-2003, 07:03 PM

HEI is sold. Thanks.

**burb71** · 10-29-2003, 07:33 PM

Does the thermostat housing come it two parts top & bottom?
How much for it?
P.S. I sent out the first payment.

superchevy · 10-29-2003, 08:03 PM

I'll check the thermostat housing tomorrow.

**BIG ORANGE** · 10-29-2003, 10:58 PM

PM me a total on shipping 29720.
thanks SC

**67sss** · 10-29-2003, 11:31 PM

Was this a auto trk? can't quite see.. needing a dedent set-up for a 70, type with a rod throttle.
Thanks

beautimus · 10-30-2003, 02:37 AM

if it was a cable type throttle i need the detent cable bracket and the modulator valve line.

superchevy · 10-30-2003, 10:28 AM

This truck was originally a 327/t400 truck. T400 is still there, but the 327 was pulled at some point, and this 6 cyl swapped in.
Look closely at pic1 of the engine. See the thin grey wire attached to the bottom throttle arm of the carb? That's the "linkage" LOL to the rod attached to the pedal. I know you don't want the wire, but the rod and the other parts attached to the pedal?
Just trying to make sure I have what ya'll are looking for. SC

10-28-2003, 12:02 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	anybody need parts off this 250 6-cylinder? It's out of my donor truck. Was running. Not sure of year. Has 3-bolt outlet exhaust manifold ($40 + ship), and HEI distributor ($20 + ship). Email me at carpediem_00@yahoo.com - please, no pm's - if you need any other parts off it. Attached Images Last edited by superchevy; 10-28-2003 at 12:04 PM.

10-28-2003, 12:03 PM	#2
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	pic2 Attached Images

10-28-2003, 12:04 PM	#3
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	pic3 Attached Images

10-28-2003, 04:58 PM	#4
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,714	250 / 6 I dont think that my Email is geting out to you I want if it will fit a 292 the exaust manifold, do you know if it will Also I need the front and rear motor lift out brackets Did this truck have power sreering? If so I want it too

10-28-2003, 06:20 PM	#5
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,745	The 292 mainofold will be the same the only difference is on the inside. I use't race 6cly back in the late 70's and we ran 6bangers and we always wanted to run the 292 mainofold on our 250 engines. How much for the carb. 29720? __________________ Things happen for a reason!

10-29-2003, 10:09 AM	#6
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Exhaust manifold and lift brackets are sold. Big Orange, $5 + ship for the carb. Let me know, SC

10-29-2003, 07:03 PM	#7
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	HEI is sold. Thanks.

10-29-2003, 07:33 PM	#8
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,714	250 / 6 Does the thermostat housing come it two parts top & bottom? How much for it? P.S. I sent out the first payment.

10-29-2003, 08:03 PM	#9
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	I'll check the thermostat housing tomorrow.

10-29-2003, 10:58 PM	#10
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,745	PM me a total on shipping 29720. thanks SC __________________ Things happen for a reason!

10-29-2003, 11:31 PM	#11
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	Was this a auto trk? can't quite see.. needing a dedent set-up for a 70, type with a rod throttle. Thanks

10-30-2003, 02:37 AM	#12
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	if it was a cable type throttle i need the detent cable bracket and the modulator valve line. __________________ i survived cancer and kidney stones, but my kids are killing me.

10-30-2003, 10:28 AM	#13
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	This truck was originally a 327/t400 truck. T400 is still there, but the 327 was pulled at some point, and this 6 cyl swapped in. Look closely at pic1 of the engine. See the thin grey wire attached to the bottom throttle arm of the carb? That's the "linkage" LOL to the rod attached to the pedal. I know you don't want the wire, but the rod and the other parts attached to the pedal? Just trying to make sure I have what ya'll are looking for. SC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.