Project mouthful-80 c10-6.0? - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Puglia10 · 02-13-2012, 07:49 PM

Haven't sold it, but also haven't touched it

I'm not sure what to do. The money and time just aren't there to finish it right now...

watahyahknow · 02-14-2012, 02:33 AM

as long as it doesnt cost you too mush sitting there , put it on jackstands and preserve the truck and leave it untill you have cash to work on it again
make sure the truck is closed off whell agains vermon as they eat trough wiring and seats at an alarming rate

Puglia10 · 08-15-2012, 08:47 PM

Well, I havent made much progress, am currently unemployed with a torn ACL and broken leg from a motorcycle accident and putting everything up FOR SALE

Hopefully someones looking for a nice project...just paid my subscription and will make a for sale thread soon. If anyone is interested, PM me. Selling with or without the 6.0/4l80e.
Located in Northeastern Mass, 20 min from Boston.

Puglia10 · 08-15-2012, 09:05 PM

Some more pics...
Where the frame has been hanging out...

brand new built rear end

all new bushings/ball joints

Oblonged cab mount was fixed

watahyahknow · 08-16-2012, 12:58 AM

darn i wish i had the cash for it , sorry to hear about youre bad luck hope you get a good price for the truck and get on top again soon

truckzilla · 08-16-2012, 10:10 AM

I'm also sorry to hear of the state of your nation. It's a real downer being unemployed! I lost two years of productive life looking for a job that would support me and mine, so I know what it feels like for you my friend. I can also relate to the ACL issue as I lost my right one in '73 and didn't get it reconstructed until '99. A bike ate mine as well and back then, in Podunksville, if it was torn, it was cut out! I hope everything begins to swing back around in your favor and I'll be praying that its soon!

Puglia10 · 08-16-2012, 11:32 AM

thanks for the kind words guys!

Puglia10 · 12-28-2012, 06:24 PM

Very motivated to sell this, will sell in pieces or whole, will work on prices etc.!!!!

I'm losing my storage soon, it NEEDS TO GO!!!!!!

Email me for more info or pics. This is a southern truck, rust free, mint, recent paint, etc.

6.0, LQ4, Built rear end, all new bushings, paint and powder coat, cowl hood, 3/5 drop, ETC ETC

WILL PART OUT

Puglia10 · 01-20-2013, 05:48 PM

EVERYTHING sold today besides the motor/trans and 4-link! PM if interested!

02-13-2012, 07:49 PM	#76
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: Project mouthful-80 c10-6.0? Haven't sold it, but also haven't touched it I'm not sure what to do. The money and time just aren't there to finish it right now... __________________ 1979 c30 3+3 dually 1946 GMC

02-14-2012, 02:33 AM	#77
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Project mouthful-80 c10-6.0? as long as it doesnt cost you too mush sitting there , put it on jackstands and preserve the truck and leave it untill you have cash to work on it again make sure the truck is closed off whell agains vermon as they eat trough wiring and seats at an alarming rate __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

08-15-2012, 08:47 PM	#78
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: Project mouthful-80 c10-6.0? Well, I havent made much progress, am currently unemployed with a torn ACL and broken leg from a motorcycle accident and putting everything up FOR SALE Hopefully someones looking for a nice project...just paid my subscription and will make a for sale thread soon. If anyone is interested, PM me. Selling with or without the 6.0/4l80e. Located in Northeastern Mass, 20 min from Boston. __________________ 1979 c30 3+3 dually 1946 GMC

08-15-2012, 09:05 PM	#79
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: Project mouthful-80 c10-6.0? Some more pics... Where the frame has been hanging out... brand new built rear end all new bushings/ball joints Oblonged cab mount was fixed __________________ 1979 c30 3+3 dually 1946 GMC

08-16-2012, 12:58 AM	#80
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Project mouthful-80 c10-6.0? darn i wish i had the cash for it , sorry to hear about youre bad luck hope you get a good price for the truck and get on top again soon __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

08-16-2012, 10:10 AM	#81
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: Project mouthful-80 c10-6.0? I'm also sorry to hear of the state of your nation. It's a real downer being unemployed! I lost two years of productive life looking for a job that would support me and mine, so I know what it feels like for you my friend. I can also relate to the ACL issue as I lost my right one in '73 and didn't get it reconstructed until '99. A bike ate mine as well and back then, in Podunksville, if it was torn, it was cut out! I hope everything begins to swing back around in your favor and I'll be praying that its soon!

08-16-2012, 11:32 AM	#82
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: Project mouthful-80 c10-6.0? thanks for the kind words guys! __________________ 1979 c30 3+3 dually 1946 GMC

12-28-2012, 06:24 PM	#83
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: Project mouthful-80 c10-6.0? Very motivated to sell this, will sell in pieces or whole, will work on prices etc.!!!! I'm losing my storage soon, it NEEDS TO GO!!!!!! Email me for more info or pics. This is a southern truck, rust free, mint, recent paint, etc. 6.0, LQ4, Built rear end, all new bushings, paint and powder coat, cowl hood, 3/5 drop, ETC ETC WILL PART OUT __________________ 1979 c30 3+3 dually 1946 GMC

01-20-2013, 05:48 PM	#84
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: Project mouthful-80 c10-6.0? EVERYTHING sold today besides the motor/trans and 4-link! PM if interested! __________________ 1979 c30 3+3 dually 1946 GMC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.