OK Welded aluminum valve covers SBC center bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 01-20-2013, 07:41 PM

Here's a nice lightly used pair of aluminum valve covers I bought from a fellow board member. They wouldn't work with my serpentine mounts.
$60 + shipping comes with the center bolts.

Posted via Mobile Device
Posted via Mobile Device

**screaminchevypickup** · 01-20-2013, 08:28 PM

Nice covers..

Posted via Mobile Device

no_rice · 01-21-2013, 02:40 AM

seems like they may be for vortec style heads?

**screaminchevypickup** · 01-21-2013, 03:03 AM

They will fit 87-98 centerbolt style heads.. Vortec or tbi..
Posted via Mobile Device

mcbassin · 01-21-2013, 09:20 AM

Quote:

Originally Posted by screaminchevypickup

They will fit 87-98 centerbolt style heads.. Vortec or tbi..
Posted via Mobile Device

Thanks Kyle.

frednoah · 01-24-2013, 10:51 PM

Were you using the stock cast aluminum GM mounts or something aftermarket? I plan on using the GM mounts, and would be interested if these would work with that.

Also interested in knowing where the interference was. If it was with the AC compressor, I may still be able to use, as I am going with a delete pulley.

Cmalone · 01-24-2013, 11:37 PM

If they will fit with stock serpetine belt set up i'll take them.
Posted via Mobile Device

mcbassin · 01-24-2013, 11:42 PM

Quote:

Originally Posted by frednoah

Were you using the stock cast aluminum GM mounts or something aftermarket? I plan on using the GM mounts, and would be interested if these would work with that.

Also interested in knowing where the interference was. If it was with the AC compressor, I may still be able to use, as I am going with a delete pulley.

I'm not sure which cast valve covers you are talking about? I was planning on replacing the stock steel TBI valve covers on a 93 5.7.
The interference I had was on the driver side at the alternator. I was using a stock tbi serpentine setup. I never tried the pass. Side after I found the interference. I'm thinking these work best on motors like Kyle's truck pictured above.
Posted via Mobile Device

frednoah · 01-24-2013, 11:44 PM

Wasn't talking about cast valve covers.

Was talking about the cast aluminum brackets from a stock GM serpentine setup, which it sounds like you just confirmed won't work due to alternator clearance.

mcbassin · 01-24-2013, 11:52 PM

Sorry for confusion on my part. I tried to put these on a 5.7 tbi out of a 93 roadmaster. Not sure if the serpentine setup is the same as a truck or Chevy car?
Kyle?
Posted via Mobile Device
Take look here:
http://67-72chevytrucks.com/vboard/s...97&postcount=8

frednoah · 01-25-2013, 12:25 AM

Other than the delete in place of the compressor, your setup looks like mine. I'm out.

**Captainfab** · 01-25-2013, 12:29 AM

I might be interested.

Does the flange have a machined groove for the gasket, or is it just flat?

**screaminchevypickup** · 01-25-2013, 05:32 AM

Machined..
Posted via Mobile Device

**Captainfab** · 01-26-2013, 12:03 AM

Good

Can I get a price with shipping to 83815 if using UPS/FedEx or to 83835 if using USPS. And how would you like the payment.

mcbassin · 01-26-2013, 12:22 AM

Quote:

Originally Posted by Captainfab

Good

Can I get a price with shipping to 83815 if using UPS/FedEx or to 83835 if using USPS. And how would you like the payment.

Yeah let me get them boxed up and I'll get you a price. More than likely Monday when I get back to work.
Posted via Mobile Device

**Captainfab** · 01-26-2013, 12:56 AM

Not a problem........

Quote:

Originally Posted by mcbassin

Yeah let me get them boxed up and I'll get you a price. More than likely Monday when I get back to work.
Posted via Mobile Device

*project 67 sub* · 01-26-2013, 01:43 PM

i have a set of these sitting in my storage brand new lol, i will be using them on the motor i will eventually put in my burban

mcbassin · 01-28-2013, 09:26 AM

Quote:

Originally Posted by Captainfab

Good

Can I get a price with shipping to 83815 if using UPS/FedEx or to 83835 if using USPS. And how would you like the payment.

Looks like $16.23 for UPS ground. I didn't try USPS because it's pretty far out of my way and UPS picks up here every day. If that works for you I can PM payment instructions. thanks

**Captainfab** · 01-28-2013, 11:49 PM

Sounds good to me. Consider them sold. Send me a PM with payment info. and I'll get you paid ASAP.

Quote:

Originally Posted by mcbassin

Looks like $16.23 for UPS ground. I didn't try USPS because it's pretty far out of my way and UPS picks up here every day. If that works for you I can PM payment instructions. thanks

mcbassin · 01-29-2013, 12:33 AM

Quote:

Originally Posted by Captainfab

Sounds good to me. Consider them sold. Send me a PM with payment info. and I'll get you paid ASAP.

Pm sent
Posted via Mobile Device

**Captainfab** · 02-06-2013, 02:12 AM

I received the valve covers yesterday. Thanks Mike

01-20-2013, 07:41 PM	#1
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Welded aluminum valve covers SBC center bolt Here's a nice lightly used pair of aluminum valve covers I bought from a fellow board member. They wouldn't work with my serpentine mounts. $60 + shipping comes with the center bolts. Posted via Mobile Device Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-20-2013, 08:28 PM	#2
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Welded aluminum valve covers SBC center bolt Nice covers.. Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

01-21-2013, 02:40 AM	#3
no_rice Registered User Join Date: Oct 2012 Location: nevada iowa Posts: 285	Re: Welded aluminum valve covers SBC center bolt seems like they may be for vortec style heads?

01-21-2013, 03:03 AM	#4
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Welded aluminum valve covers SBC center bolt They will fit 87-98 centerbolt style heads.. Vortec or tbi.. Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

01-24-2013, 10:51 PM	#6
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Welded aluminum valve covers SBC center bolt Were you using the stock cast aluminum GM mounts or something aftermarket? I plan on using the GM mounts, and would be interested if these would work with that. Also interested in knowing where the interference was. If it was with the AC compressor, I may still be able to use, as I am going with a delete pulley.

01-24-2013, 11:37 PM	#7
Cmalone Registered User Join Date: Oct 2012 Location: Tyler texas Posts: 33	Re: Welded aluminum valve covers SBC center bolt If they will fit with stock serpetine belt set up i'll take them. Posted via Mobile Device

01-24-2013, 11:44 PM	#9
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Welded aluminum valve covers SBC center bolt Wasn't talking about cast valve covers. Was talking about the cast aluminum brackets from a stock GM serpentine setup, which it sounds like you just confirmed won't work due to alternator clearance.

01-24-2013, 11:52 PM	#10
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Welded aluminum valve covers SBC center bolt Sorry for confusion on my part. I tried to put these on a 5.7 tbi out of a 93 roadmaster. Not sure if the serpentine setup is the same as a truck or Chevy car? Kyle? Posted via Mobile Device Take look here: http://67-72chevytrucks.com/vboard/s...97&postcount=8 __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-25-2013, 12:25 AM	#11
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Welded aluminum valve covers SBC center bolt Other than the delete in place of the compressor, your setup looks like mine. I'm out.

01-25-2013, 12:29 AM	#12
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Welded aluminum valve covers SBC center bolt I might be interested. Does the flange have a machined groove for the gasket, or is it just flat? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-25-2013, 05:32 AM	#13
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Welded aluminum valve covers SBC center bolt Machined.. Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

01-26-2013, 12:03 AM	#14
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Welded aluminum valve covers SBC center bolt Good Can I get a price with shipping to 83815 if using UPS/FedEx or to 83835 if using USPS. And how would you like the payment. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-26-2013, 01:43 PM	#17
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Welded aluminum valve covers SBC center bolt i have a set of these sitting in my storage brand new lol, i will be using them on the motor i will eventually put in my burban

02-06-2013, 02:12 AM	#21
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Welded aluminum valve covers SBC center bolt I received the valve covers yesterday. Thanks Mike __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.