NY nv4500 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blue_69 · 02-03-2013, 08:44 AM

I have a nv4500 for a 4x4 with chevy bellhousing and a flywheel from a 6.5 diesel. I have never had it in a running vehicle to test it but it shifts and turns smooth by hand. This is the older model with the lower first gear and external slave cylinder. I am open to offers and willing to deliver within 4 hours drive from syracuse NY for the price of gas. I do not want to ship this right now. asking $850

thanks, jason

**WIDESIDE72** · 02-03-2013, 10:40 AM

Heres a bump for you. I had a 93 GMC K2500 with this same trans.that 1st gear would pull down a house! I understand they used a version of these behind the Cummins 5.9 engines, so strength isn't an issue. Only issue with these is to be sure to run the (expensive) synthetic fluid. They say any thing else will burn up the trans.
Posted via Mobile Device

blue_69 · 02-03-2013, 02:47 PM

that is why i am selling this one. I got a decent deal on a cummins and to put this trans behind a cummins would require changing the gears inside, some machining, and replacing the input shaft. I found a dodge nv4500 so i'm selling this one.

blue_69 · 02-06-2013, 05:16 AM

bump...................................

02-03-2013, 08:44 AM	#1
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	nv4500 4x4 I have a nv4500 for a 4x4 with chevy bellhousing and a flywheel from a 6.5 diesel. I have never had it in a running vehicle to test it but it shifts and turns smooth by hand. This is the older model with the lower first gear and external slave cylinder. I am open to offers and willing to deliver within 4 hours drive from syracuse NY for the price of gas. I do not want to ship this right now. asking $850 thanks, jason Attached Images __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

02-03-2013, 10:40 AM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: nv4500 4x4 Heres a bump for you. I had a 93 GMC K2500 with this same trans.that 1st gear would pull down a house! I understand they used a version of these behind the Cummins 5.9 engines, so strength isn't an issue. Only issue with these is to be sure to run the (expensive) synthetic fluid. They say any thing else will burn up the trans. Posted via Mobile Device

02-03-2013, 02:47 PM	#3
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	Re: nv4500 4x4 that is why i am selling this one. I got a decent deal on a cummins and to put this trans behind a cummins would require changing the gears inside, some machining, and replacing the input shaft. I found a dodge nv4500 so i'm selling this one. __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

02-06-2013, 05:16 AM	#4
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	Re: nv4500 4x4 bump................................... __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.