MO Parting a 68 C10 longbed, need anything?? - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aventur1 · 02-22-2013, 05:46 PM

Was thinking that I need front bumber brackets, are those spoken for?

**specialtyretail** · 02-22-2013, 06:01 PM

Quote:

Originally Posted by mustache mike

Hood Molding /Are all the mounting bolts still intact ? Are there just 3 small dings?Have they been hit by a sander at all or do you think they will clean up pretty good.Thanks mustache mike

Hey there. I know one stud is broken off, maybe more. It is just an average original part, did not notice any sander scuffs. Looks like it should clean up good but we all have differing opinions of good. Thanks, Fred.

**specialtyretail** · 02-22-2013, 06:03 PM

Quote:

Originally Posted by mvesr

Hey Fred, do you have a rear tag bracket and tag light that goes into it?

Thanks-Mika

Hey Mika. Sorry, everything we have sitting around here has the steel work bumpers. Thanks, Fred.

**specialtyretail** · 02-22-2013, 06:04 PM

Quote:

Originally Posted by aventur1

Was thinking that I need front bumber brackets, are those spoken for?

Bumper brackets went with the front bumper, sorry. Thanks, Fred.

ScottG · 02-22-2013, 07:42 PM

Just checking in on the fan shroud, if you ever got to it?

neverstock · 02-22-2013, 11:45 PM

I need right rear bedside patch panel

**specialtyretail** · 02-23-2013, 11:39 AM

Quote:

Originally Posted by ScottG

Just checking in on the fan shroud, if you ever got to it?

Hey Scott. Weather is looking good here today so I will check a couple of them we have and see if they are any good, trying to find a nice one.. Thanks, Fred.

aventur1 · 02-23-2013, 12:54 PM

Paypal sent
Thanks

**specialtyretail** · 02-23-2013, 01:15 PM

Quote:

Originally Posted by aventur1

Paypal sent
Thanks

Hey there. Marker lamps will go out Monday morning. Thanks, Fred.

buddylee · 02-23-2013, 03:35 PM

Passenger inner fender. Any chance the front that bolts to core support is salvageable to be cut and reused on different inner fender?

Thank you
Chris
Posted via Mobile Device

**specialtyretail** · 02-23-2013, 03:51 PM

Quote:

Originally Posted by buddylee

Passenger inner fender. Any chance the front that bolts to core support is salvageable to be cut and reused on different inner fender?

Thank you
Chris
Posted via Mobile Device

Hey Chris. I think the only thing holding the inner fenders in was the bolts in the rear that go into the cab. They were terrible, some of the worst we have seen. Thanks, Fred.

buddylee · 02-23-2013, 03:53 PM

Thanks.
Posted via Mobile Device

**specialtyretail** · 02-23-2013, 06:50 PM

SOLD,,,, THANKS.... Better pics of caps and rings. The caps are plastic. Thanks, Fred.

**specialtyretail** · 02-24-2013, 10:31 AM

Quote:

Originally Posted by neverstock

I need right rear bedside patch panel

Hey thete. The bed is pretty rough. It would need patch panels for me to cut out so I could sell some patch panels. Thanks, Fred.

ATT · 02-24-2013, 02:36 PM

Iam in need of a door lock rod. Do you happen to have one? How much for it shipped to zip 37355. Thanks

iregalado · 02-24-2013, 03:33 PM

How much for caps and rings to 93905
Posted via Mobile Device

**specialtyretail** · 02-24-2013, 06:15 PM

Quote:

Originally Posted by iregalado

How much for caps and rings to 93905
Posted via Mobile Device

$50.00 shipped for all of them. Thanks, Fred.

1970 Bowtie · 02-24-2013, 06:46 PM

Fred,gonna pass on the caps and rings...Thanks,Mike..

**specialtyretail** · 02-24-2013, 06:55 PM

Quote:

Originally Posted by 1970 Bowtie

Fred,gonna pass on the caps and rings...Thanks,Mike..

Hey Mike. Not a problem. Thanks, Fred.

**specialtyretail** · 03-15-2013, 11:42 PM

Truck is going to be hauled off Sunday. Still taking parts off, lots of good stuff left. I am off Saturday and will be able to get pics and info on anything you need. Thanks, Fred.

ryguy69 · 03-16-2013, 12:04 AM

do u still have the throttle linkage and mount/pedal? if so how much shipped to 49637?

**specialtyretail** · 03-16-2013, 06:53 AM

Quote:

Originally Posted by ryguy69

do u still have the throttle linkage and mount/pedal? if so how much shipped to 49637?

All I have is the firewal mount and pivot linkage. I wil get you a pic this morning. Thanks, Fred.

**specialtyretail** · 03-20-2013, 12:13 PM

The truck is gone,, have a few boxes of odds and ends left from it. Thanks, Fred.

philB · 03-20-2013, 04:36 PM

are the caps still up for sale,

Quote:

Originally Posted by specialtyretail

Better pics of caps and rings. The caps are plastic. Thanks, Fred.

Leroy-B1 · 03-20-2013, 05:18 PM

What color are the belts and are they still available
Posted via Mobile Device

02-22-2013, 05:46 PM	#151
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Parting a 68 C10 longbed, need anything?? Was thinking that I need front bumber brackets, are those spoken for? __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

02-22-2013, 07:42 PM	#155
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Parting a 68 C10 longbed, need anything?? Just checking in on the fan shroud, if you ever got to it? __________________ '67 C20 LBW

02-22-2013, 11:45 PM	#156
neverstock Registered User Join Date: Jan 2009 Location: Harrah, OK Posts: 1	Re: Parting a 68 C10 longbed, need anything?? I need right rear bedside patch panel

02-23-2013, 12:54 PM	#158
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Parting a 68 C10 longbed, need anything?? Paypal sent Thanks __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

02-23-2013, 03:35 PM	#160
buddylee Registered User Join Date: Jan 2010 Location: Coventry,RI Posts: 114	Re: Parting a 68 C10 longbed, need anything?? Passenger inner fender. Any chance the front that bolts to core support is salvageable to be cut and reused on different inner fender? Thank you Chris Posted via Mobile Device

02-23-2013, 03:53 PM	#162
buddylee Registered User Join Date: Jan 2010 Location: Coventry,RI Posts: 114	Re: Parting a 68 C10 longbed, need anything?? Thanks. Posted via Mobile Device

02-23-2013, 06:50 PM	#163
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? SOLD,,,, THANKS.... Better pics of caps and rings. The caps are plastic. Thanks, Fred. Attached Images Last edited by specialtyretail; 03-20-2013 at 07:12 PM.

02-24-2013, 02:36 PM	#165
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Parting a 68 C10 longbed, need anything?? Iam in need of a door lock rod. Do you happen to have one? How much for it shipped to zip 37355. Thanks

02-24-2013, 03:33 PM	#166
iregalado Registered User Join Date: Sep 2009 Location: salinas, california Posts: 26	Re: Parting a 68 C10 longbed, need anything?? How much for caps and rings to 93905 Posted via Mobile Device

02-24-2013, 06:46 PM	#168
1970 Bowtie It's all in the timing Join Date: May 2009 Location: Lake Mary,Florida Posts: 600	Re: Parting a 68 C10 longbed, need anything?? Fred,gonna pass on the caps and rings...Thanks,Mike.. __________________ The Dude Abides. ---------------------- I aint sayin, I'm just sayin.

03-15-2013, 11:42 PM	#170
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? Truck is going to be hauled off Sunday. Still taking parts off, lots of good stuff left. I am off Saturday and will be able to get pics and info on anything you need. Thanks, Fred.

03-16-2013, 12:04 AM	#171
ryguy69 Registered User Join Date: Mar 2013 Location: Grawn Michigan Posts: 10	Re: Parting a 68 C10 longbed, need anything?? do u still have the throttle linkage and mount/pedal? if so how much shipped to 49637?

03-20-2013, 12:13 PM	#173
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? The truck is gone,, have a few boxes of odds and ends left from it. Thanks, Fred.

03-20-2013, 05:18 PM	#175
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Parting a 68 C10 longbed, need anything?? What color are the belts and are they still available Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.