Billet Aluminum Radio Plate - Gauging Interest for another production run - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 02-25-2013, 04:56 PM

Looks like we are about half way there

Hatch guy · 02-26-2013, 09:04 PM

Im in. polished.

Stickman · 02-26-2013, 09:23 PM

I'm in, unpolished, where and when do I send the $.
Posted via Mobile Device

Groove_hunter · 02-26-2013, 09:36 PM

I'm in as well. One polished. Let me know the method of payment. Curious how the bezel mounts to the cut dash and creates a solid mount.
Posted via Mobile Device

jetfixr · 02-28-2013, 10:46 PM

Just wanted to bump this to see if we could get any more interest. These bezels make a really slick looking installation.

OregonNed · 02-28-2013, 11:34 PM

Polished if I didn't mention it before. Also interested in how it mounts
Posted via Mobile Device

BionicABs1 · 03-01-2013, 12:10 AM

I'm in. I'd be most interested in a black one.
Posted via Mobile Device

**Already Gone** · 03-01-2013, 02:10 AM

I'm in for polished one and will pay extra for shipping and will send a deposit if you want.

mahanian · 03-01-2013, 08:06 PM

Getting close

Street Smart · 03-01-2013, 08:34 PM

I`m in for a polished one.

jeremy32v · 03-01-2013, 10:57 PM

i would like to order a polished one please when you start your production run. do you take pay pal>?

mahanian · 03-06-2013, 10:28 AM

Anyone else interested? We are getting close to having enough people.

dapperg · 03-06-2013, 11:04 AM

I am definitely in for unpolished one.

I was going for a stock radio but the previous owner of my truck already cut up the dash so this would be a nice solution to keep the classy look.

~Whitey~ · 03-06-2013, 12:10 PM

I'm in for one. Polished.
I just need you to let me know how to purchase.

Wizzy72 · 03-06-2013, 12:47 PM

OK, i'm in. Put me down for 1 polished and 1 unpolished.
Posted via Mobile Device

MFCopenhagen · 03-06-2013, 02:09 PM

Count me in for one unpolished!

mmsidaho · 03-06-2013, 04:00 PM

Please put me down for 1 polished and let me know when I need to make payment.

Thanks.

LongNLowGMC · 03-06-2013, 05:38 PM

Put me down for 1 polished.

BionicABs1 · 03-08-2013, 09:05 AM

Any idea on when these might get made?

mahanian · 03-08-2013, 11:22 AM

There aren't 30 of them spoken for but if everyone is willing to pay at least a $25 deposit for each one they want I'll order them. This is what I did last time and it worked out well.
Posted via Mobile Device

My7d1 · 03-08-2013, 11:39 AM

I'm in for black anodized. PO cut a not so smooth opening for a single DIN stereo, will make for a nice finishing touch.

FishTaco · 03-08-2013, 01:34 PM

Sign me up for a polished one, please.

mahanian · 03-08-2013, 01:38 PM

I'm not offering anodized at this time, I haven't seen a product sample yet, I might offer them later

mahanian · 03-08-2013, 01:41 PM

I'll send out a PM this weekend to each of you with deposit payment details. As soon as I have 20 deposits I'll pay my dues on the forum and place the order. If I don't get 20 deposits within a month I will refund everyone's money.

My7d1 · 03-08-2013, 02:57 PM

If no anodized, I am in for polished, will match the surround of the new heater/AC controls...

02-25-2013, 04:56 PM	#26
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Looks like we are about half way there __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-26-2013, 09:04 PM	#27
Hatch guy Registered User Join Date: Sep 2012 Location: West Paducah,KY Posts: 26	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Im in. polished.

02-26-2013, 09:23 PM	#28
Stickman Registered User Join Date: Mar 2008 Location: Chandler,AZ Posts: 571	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in, unpolished, where and when do I send the $. Posted via Mobile Device

02-26-2013, 09:36 PM	#29
Groove_hunter Registered User Join Date: Feb 2013 Location: Orlando florida Posts: 23	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in as well. One polished. Let me know the method of payment. Curious how the bezel mounts to the cut dash and creates a solid mount. Posted via Mobile Device

02-28-2013, 10:46 PM	#30
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Just wanted to bump this to see if we could get any more interest. These bezels make a really slick looking installation.

02-28-2013, 11:34 PM	#31
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Polished if I didn't mention it before. Also interested in how it mounts Posted via Mobile Device __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-01-2013, 12:10 AM	#32
BionicABs1 Registered User Join Date: Nov 2010 Location: Longs, SC Posts: 89	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in. I'd be most interested in a black one. Posted via Mobile Device

03-01-2013, 02:10 AM	#33
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,075	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in for polished one and will pay extra for shipping and will send a deposit if you want. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

03-01-2013, 08:06 PM	#34
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Getting close __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-01-2013, 08:34 PM	#35
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I`m in for a polished one. __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

03-01-2013, 10:57 PM	#36
jeremy32v Registered User Join Date: Nov 2011 Location: Wilmington, North Carolina Posts: 7	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run i would like to order a polished one please when you start your production run. do you take pay pal>?

03-06-2013, 10:28 AM	#37
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Anyone else interested? We are getting close to having enough people. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-06-2013, 11:04 AM	#38
dapperg Registered User Join Date: Feb 2013 Location: Atlanta, GA Posts: 84	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I am definitely in for unpolished one. I was going for a stock radio but the previous owner of my truck already cut up the dash so this would be a nice solution to keep the classy look. __________________ . . . . . . . . . ________ . . . . . . __________///____ //_____ /____ 72’ __/_____ /_ ___/ ===( o )=======( o ) . . . . . . . . . . . . . . . . . . . . . . 72' Chevy C10 Super Fleetside Longbed "Speak softly & carry a big pistol." Last edited by dapperg; 03-06-2013 at 11:12 AM. Reason: changed to unpolished

03-06-2013, 12:10 PM	#39
~Whitey~ Registered User Join Date: Jun 2011 Location: Springfield, MO Posts: 677	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in for one. Polished. I just need you to let me know how to purchase. __________________ Jimmy .69SWB Build.

03-06-2013, 12:47 PM	#40
Wizzy72 Registered User Join Date: Feb 2013 Location: Hennessey, ok Posts: 15	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run OK, i'm in. Put me down for 1 polished and 1 unpolished. Posted via Mobile Device



Register or Log In To remove these advertisements.

03-06-2013, 02:09 PM	#41
MFCopenhagen Registered User Join Date: Jan 2013 Location: Coos Bay, Oregon Posts: 19	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Count me in for one unpolished! __________________ Daisy the Junkyard Duck - 1969 K20 Longbed

03-06-2013, 04:00 PM	#42
mmsidaho Registered User Join Date: Feb 2012 Location: Meridian, Idaho Posts: 37	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Please put me down for 1 polished and let me know when I need to make payment. Thanks. __________________ 1972 C20 Custom Camper 1972 C10 Under Restoration

03-06-2013, 05:38 PM	#43
LongNLowGMC Registered User Join Date: Oct 2012 Location: Sonora, CA Posts: 134	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Put me down for 1 polished.

03-08-2013, 09:05 AM	#44
BionicABs1 Registered User Join Date: Nov 2010 Location: Longs, SC Posts: 89	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Any idea on when these might get made?

03-08-2013, 11:22 AM	#45
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run There aren't 30 of them spoken for but if everyone is willing to pay at least a $25 deposit for each one they want I'll order them. This is what I did last time and it worked out well. Posted via Mobile Device __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-08-2013, 11:39 AM	#46
My7d1 Registered User Join Date: Jan 2013 Location: Aliso Viejo, CA Posts: 65	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in for black anodized. PO cut a not so smooth opening for a single DIN stereo, will make for a nice finishing touch. Attached Images

03-08-2013, 01:34 PM	#47
FishTaco Registered User Join Date: Oct 2011 Location: Raleigh, NC Posts: 3	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Sign me up for a polished one, please.

03-08-2013, 01:38 PM	#48
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm not offering anodized at this time, I haven't seen a product sample yet, I might offer them later __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-08-2013, 01:41 PM	#49
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'll send out a PM this weekend to each of you with deposit payment details. As soon as I have 20 deposits I'll pay my dues on the forum and place the order. If I don't get 20 deposits within a month I will refund everyone's money. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-08-2013, 02:57 PM	#50
My7d1 Registered User Join Date: Jan 2013 Location: Aliso Viejo, CA Posts: 65	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run If no anodized, I am in for polished, will match the surround of the new heater/AC controls...

Register or Log In To remove these advertisements.