NE WTB 1967 Chevy/GMC V8 Engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jmader** · 09-05-2013, 01:51 PM

Looking to buy an engine for a 1967 GMC truck. Looking for a 327 with engine code YM or 283 with engine codes WB, WI, or WO

**jmader** · 09-10-2013, 06:32 PM

Ttt
Posted via Mobile Device

**jmader** · 09-15-2013, 06:36 PM

Ttt
Posted via Mobile Device

**jmader** · 09-21-2013, 08:49 AM

Ttt
Posted via Mobile Device

tlcrz1972 · 09-21-2013, 11:24 AM

I have a 283 that came out of a 1967 3/4 4x4 unfortunately it was locked up and I have spent some time to get the pistons loose but have not got it dismantled yet.

I can't tell you that the block is good, but it came out of a truck that was wrecked and parked in 1975 or '76 and only showed 58,000 miles on the truck.

I slipped with my tools and dinged the crank throws so the crank probably is bad, the heads are complete, but very rusty.

And I have other parts that came off of it.

If your interested there is a possibility that I may be headed to Pierce, Nebraska to the big auction going on at that car dealership that shut down many years ago. It just depends on if my dad buys anything or not as to me driving that way with truck and trailer. If I do I can load them and we could meet so you could look at them.

Just an idea, let me know where the marking are that referring to.

**jmader** · 09-21-2013, 11:49 AM

Yes I am definitely interested. What are the standings on the engine block on the passenger side right in front of the head? I am going to try and go to Pierce next weekend so we might possibly be able to meet up there.
Posted via Mobile Device

tlcrz1972 · 09-21-2013, 01:05 PM

The stamping is VO906WI

Here is a couple of pictures.

**jmader** · 09-21-2013, 02:14 PM

Yeah that would work although it does look pretty rough. How are the insides of the cylinders? Looks like a lot of rust. How much are you thinking you want out of it?
Posted via Mobile Device

tlcrz1972 · 09-21-2013, 10:53 PM

Yeah it isn't super great, but I would say it could clean up with a .010 bore.

I'll take it by an engine rebuilding friend of mine and get him to tell me what he thinks.

How about $85.00 for the block and heads?

Quote:

Originally Posted by jmader

Yeah that would work although it does look pretty rough. How are the insides of the cylinders? Looks like a lot of rust. How much are you thinking you want out of it?
Posted via Mobile Device

**jmader** · 09-22-2013, 12:00 AM

Posted via Mobile Device

**jmader** · 09-22-2013, 12:01 AM

Sounds fair to me. What other parts do you have to the engine. I'll need pretty much anything you have.
Posted via Mobile Device

tlcrz1972 · 09-22-2013, 03:05 PM

I have another thread labeled "1967 rams horn manifolds and engine parts"

Look for it and that is most of what I have for it.

There may be a few other things but I will just have to look.

Quote:

Originally Posted by jmader

Sounds fair to me. What other parts do you have to the engine. I'll need pretty much anything you have.
Posted via Mobile Device

ufbugman · 09-22-2013, 08:41 PM

I have a 327 running ,camel hump heads new carb new starter

on intake near distributor 3818803 and under that GM 2

Carb Quadrajet 7041280 r1 fa

block
3914660

**jmader** · 10-02-2013, 07:39 AM

Still haven't been able to secure an engine. Anybody else have anything?
Posted via Mobile Device

**jmader** · 10-15-2013, 05:06 PM

Still looking. Would be willing to buy an entire parts truck or whatever if the engine is what I'm looking for.

**jmader** · 10-24-2013, 09:50 AM

Ttt

**zicc1835** · 10-24-2013, 10:04 AM

I have a running 283 I'll check the numbers

**jmader** · 10-24-2013, 02:45 PM

Quote:

Originally Posted by zicc1835

I have a running 283 I'll check the numbers

Ok thank you!!

09-05-2013, 01:51 PM	#1
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	WTB 1967 Chevy/GMC V8 Engine Looking to buy an engine for a 1967 GMC truck. Looking for a 327 with engine code YM or 283 with engine codes WB, WI, or WO

09-10-2013, 06:32 PM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Ttt Posted via Mobile Device

09-15-2013, 06:36 PM	#3
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Ttt Posted via Mobile Device

09-21-2013, 08:49 AM	#4
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Ttt Posted via Mobile Device

09-21-2013, 11:24 AM	#5
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: WTB 1967 Chevy/GMC V8 Engine I have a 283 that came out of a 1967 3/4 4x4 unfortunately it was locked up and I have spent some time to get the pistons loose but have not got it dismantled yet. I can't tell you that the block is good, but it came out of a truck that was wrecked and parked in 1975 or '76 and only showed 58,000 miles on the truck. I slipped with my tools and dinged the crank throws so the crank probably is bad, the heads are complete, but very rusty. And I have other parts that came off of it. If your interested there is a possibility that I may be headed to Pierce, Nebraska to the big auction going on at that car dealership that shut down many years ago. It just depends on if my dad buys anything or not as to me driving that way with truck and trailer. If I do I can load them and we could meet so you could look at them. Just an idea, let me know where the marking are that referring to. __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

09-21-2013, 11:49 AM	#6
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Yes I am definitely interested. What are the standings on the engine block on the passenger side right in front of the head? I am going to try and go to Pierce next weekend so we might possibly be able to meet up there. Posted via Mobile Device

09-21-2013, 01:05 PM	#7
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: WTB 1967 Chevy/GMC V8 Engine The stamping is VO906WI Here is a couple of pictures. Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

09-21-2013, 02:14 PM	#8
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Yeah that would work although it does look pretty rough. How are the insides of the cylinders? Looks like a lot of rust. How much are you thinking you want out of it? Posted via Mobile Device

09-22-2013, 12:00 AM	#10
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Posted via Mobile Device

09-22-2013, 12:01 AM	#11
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Sounds fair to me. What other parts do you have to the engine. I'll need pretty much anything you have. Posted via Mobile Device

09-22-2013, 08:41 PM	#13
ufbugman Registered User Join Date: Apr 2013 Location: High springs Florida Posts: 174	Re: WTB 1967 Chevy/GMC V8 Engine I have a 327 running ,camel hump heads new carb new starter on intake near distributor 3818803 and under that GM 2 Carb Quadrajet 7041280 r1 fa block 3914660 Attached Images

10-02-2013, 07:39 AM	#14
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Still haven't been able to secure an engine. Anybody else have anything? Posted via Mobile Device

10-15-2013, 05:06 PM	#15
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Still looking. Would be willing to buy an entire parts truck or whatever if the engine is what I'm looking for. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

10-24-2013, 09:50 AM	#16
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: WTB 1967 Chevy/GMC V8 Engine Ttt __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

10-24-2013, 10:04 AM	#17
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,144	Re: WTB 1967 Chevy/GMC V8 Engine I have a running 283 I'll check the numbers __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.