CA Heavy Duty Back Bumper .... Few were interested - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 10-06-2013, 10:09 PM

I know a few of you were interested in this bumper...Apologies for the delay, but I am finally clearing my yard for a building project.

I cleared out my inbox which was full, and now cannot remember who was inquiring.

Anyway, here are some pics of the beast ....

it is nice and straight, with receiver.

Whoever built this wanted to pull a tank, due to the length of channel bolted to chassis.

This bumper will fit 63 and up.

FREE !!

JUST PAY TO SHIP THIS BEAST !!

**ChiefRocka** · 10-07-2013, 10:10 AM

NOTE:

The long channel could be cut down shorter, or even to the rear most mount.

And the receiver could also be removed.

There is a hole for a light plug, and two small holes where the I-bolts are located .... Both of which could be welded up easily.

Dillon Rock · 11-22-2013, 02:19 AM

Looks like an old fleetside factory step bumper ChiefRocka.

shok · 11-22-2013, 02:43 PM

I'm interested and could drive over to Hollister Thanksgivng weekend sometime, is that cool ?

10-06-2013, 10:09 PM	#1
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Heavy Duty Back Bumper .... Few were interested I know a few of you were interested in this bumper...Apologies for the delay, but I am finally clearing my yard for a building project. I cleared out my inbox which was full, and now cannot remember who was inquiring. Anyway, here are some pics of the beast .... it is nice and straight, with receiver. Whoever built this wanted to pull a tank, due to the length of channel bolted to chassis. This bumper will fit 63 and up. FREE !! JUST PAY TO SHIP THIS BEAST !! Attached Images __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 10-06-2013 at 11:47 PM.

10-07-2013, 10:10 AM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Heavy Duty Back Bumper .... Few were interested NOTE: The long channel could be cut down shorter, or even to the rear most mount. And the receiver could also be removed. There is a hole for a light plug, and two small holes where the I-bolts are located .... Both of which could be welded up easily. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

11-22-2013, 02:19 AM	#3
Dillon Rock Registered User Join Date: Dec 2012 Location: Bangor, Michigan Posts: 375	Re: Heavy Duty Back Bumper .... Few were interested Looks like an old fleetside factory step bumper ChiefRocka. __________________ That's the thing about a Chevrolet, no matter how they look, whether it be a trailer queen or a good ol' used farm truck, no other truck on the road will always look that damn good wearing a Bowtie.

11-22-2013, 02:43 PM	#4
shok Registered User Join Date: May 2012 Location: Salinas, Ca Posts: 299	Re: Heavy Duty Back Bumper .... Few were interested I'm interested and could drive over to Hollister Thanksgivng weekend sometime, is that cool ? __________________ 1966 C10 250 with 3 on the tree Build Thread Bunch of other cars no one cares about



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.