OK Radio delete plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sigshooter · 11-09-2013, 08:20 PM

Radio delete plates, $25.00 each shipped in the us

I have 4 early (ribbed style) and 3 later (smooth). All have the retaining clips on the back.

In my opinion the best condition is at the top working down to the ones with less factory paint or reprinted as the white one.

**DA68** · 11-11-2013, 01:48 PM

My dash was cut up for an aftermarket radio and I've been wanting a delete plate. Can you give me the dimensions for the early and late style? Much appreciated.

Billett · 11-11-2013, 02:11 PM

If these will fit on a 67-72 I am in for one!

sigshooter · 11-11-2013, 05:16 PM

Quote:

Originally Posted by DA68

My dash was cut up for an aftermarket radio and I've been wanting a delete plate. Can you give me the dimensions for the early and late style? Much appreciated.

Measured and they are the same 2" wide x7 1/2" long

sigshooter · 11-11-2013, 05:17 PM

Quote:

Originally Posted by Billett

If these will fit on a 67-72 I am in for one!

Size is 2 wide by 7 long, the mounting tabs are spring loaded and slide the length of the plate ... Maybe measure your dash and let us all know

Billett · 11-11-2013, 05:20 PM

I'll get a measurement tonight. I might actually be interested in one of each style if they fit, and I believe they will.

**DA68** · 11-11-2013, 11:10 PM

I'll take one of the best condition smooth plates.

sigshooter · 11-11-2013, 11:57 PM

Quote:

Originally Posted by DA68

I'll take one of the best condition smooth plates.

Pm sent

Billett · 11-12-2013, 10:34 AM

Had to stay late at work last night, but if you don't mind set aside the next best smooth plate for me.

Billett · 11-13-2013, 09:01 PM

Looks about the right size. 7.5" should just cover the holes for the control knobs. PM me info if you don't mind. Here is one for my year. Are the clips similar?

http://67-72chevytrucks.com/vboard/s...d.php?t=597694

sigshooter · 11-15-2013, 10:43 PM

TTT for the weekend I still have several of each

Billett · 11-16-2013, 12:17 AM

Never got a PM. I would like the next best smooth one though.

sigshooter · 11-16-2013, 12:26 AM

Quote:

Originally Posted by Billett

Never got a PM. I would like the next best smooth one though.

Pm sent, PayPal is rswepston@yahoo.com or I can pm you an address is you need to mail m/o

Thanks

sigshooter · 11-16-2013, 12:37 AM

Quote:

Originally Posted by Billett

Never got a PM. I would like the next best smooth one though.

Pm sent, PayPal is rswepston@yahoo.com or I can pm you an address is you need to mail m/o

Thanks

Billett · 11-16-2013, 12:33 PM

Paypal sent

sigshooter · 11-18-2013, 11:08 PM

Quote:

Originally Posted by DA68

I'll take one of the best condition smooth plates.

Payment received, I have them boxed and they will mail tomorrow thanks

sigshooter · 11-18-2013, 11:19 PM

Quote:

Originally Posted by Billett

Paypal sent

Payment received, I have them packaged and they will mail tomorrow. Picked you the next nicest ones .

Thanks

sigshooter · 11-23-2013, 11:57 AM

I still have a couple ribbed style radio delete plates, 25.00 to your door in the US

53Sparky · 11-23-2013, 08:47 PM

I'll take the next best one. (correcting my misstep on the buyer protocol. Shouldn't have sent a PM first)

sigshooter · 11-23-2013, 09:22 PM

Quote:

Originally Posted by 53Sparky

I'll take the next best one. (correcting my misstep on the buyer protocol. Shouldn't have sent a PM first)

Pm sent with payment info

McCoyAZ · 11-24-2013, 05:02 PM

Any chance you have the Heater Control delete plate to fit a 64 dash?

sigshooter · 11-24-2013, 05:06 PM

No, I can't say I have ever seen this plate in person

sigshooter · 11-25-2013, 01:24 AM

Radio deletes are all sold....... I have 3 older 4 hole style heater delete plates left

Billett · 11-25-2013, 01:00 PM

In case anyone else was interested, this delete plate is actually a little too thin to cover the holes on a 67-72. It isn't a big deal for me because I may be restoring a 60-66 in the near future, but anyone wondering in the future will have to wait for a 67-72 style one.

11-09-2013, 08:20 PM	#1
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Radio delete plates Radio delete plates, $25.00 each shipped in the us I have 4 early (ribbed style) and 3 later (smooth). All have the retaining clips on the back. In my opinion the best condition is at the top working down to the ones with less factory paint or reprinted as the white one. Attached Images __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

11-11-2013, 01:48 PM	#2
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Radio delete plates My dash was cut up for an aftermarket radio and I've been wanting a delete plate. Can you give me the dimensions for the early and late style? Much appreciated.

11-11-2013, 02:11 PM	#3
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Radio delete plates If these will fit on a 67-72 I am in for one! __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

11-11-2013, 05:20 PM	#6
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Radio delete plates I'll get a measurement tonight. I might actually be interested in one of each style if they fit, and I believe they will. __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

11-11-2013, 11:10 PM	#7
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Radio delete plates I'll take one of the best condition smooth plates.

11-12-2013, 10:34 AM	#9
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Radio delete plates Had to stay late at work last night, but if you don't mind set aside the next best smooth plate for me. __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

11-13-2013, 09:01 PM	#10
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Radio delete plates Looks about the right size. 7.5" should just cover the holes for the control knobs. PM me info if you don't mind. Here is one for my year. Are the clips similar? http://67-72chevytrucks.com/vboard/s...d.php?t=597694 __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

11-15-2013, 10:43 PM	#11
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Re: Radio delete plates TTT for the weekend I still have several of each __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

11-16-2013, 12:17 AM	#12
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Radio delete plates Never got a PM. I would like the next best smooth one though. __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

11-16-2013, 12:33 PM	#15
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Radio delete plates Paypal sent __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

11-23-2013, 11:57 AM	#18
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Re: Radio delete plates I still have a couple ribbed style radio delete plates, 25.00 to your door in the US __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

11-23-2013, 08:47 PM	#19
53Sparky Registered User Join Date: Nov 2013 Location: Northglenn, Colorado Posts: 186	Re: Radio delete plates I'll take the next best one. (correcting my misstep on the buyer protocol. Shouldn't have sent a PM first)

11-24-2013, 05:02 PM	#21
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: Radio delete plates Any chance you have the Heater Control delete plate to fit a 64 dash? __________________ http://s994.photobucket.com/albums/af62/ScottAz2/

11-24-2013, 05:06 PM	#22
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Re: Radio delete plates No, I can't say I have ever seen this plate in person __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

11-25-2013, 01:24 AM	#23
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Re: Radio delete plates Radio deletes are all sold....... I have 3 older 4 hole style heater delete plates left __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide



Register or Log In To remove these advertisements.

11-25-2013, 01:00 PM	#24
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Radio delete plates In case anyone else was interested, this delete plate is actually a little too thin to cover the holes on a 67-72. It isn't a big deal for me because I may be restoring a 60-66 in the near future, but anyone wondering in the future will have to wait for a 67-72 style one. __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

Register or Log In To remove these advertisements.