|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-09-2013, 06:57 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: Clover,SC
Posts: 142
|
I need help on backspacing and off set
Ok guys I bought another c10 and looking to go with a decent lip rim but don't want to cut the rear end or tub the bed.... the truck has a patina paint job and cleared, even the inside of the bed was cleared. Just wondering how wide I can go without cutting..... any help would be great, thanks guys
Last edited by fastnotch89; 12-09-2013 at 07:25 PM. |
|
|
|
12-09-2013, 08:25 PM
|
#2 |
|
Registered User
Join Date: Oct 2013
Location: Kelowna BC
Posts: 51
|
Re: I need help on backspacing and off set
I have 295/40R20 in the back on 10 wide 0 offset rims stock inner fender and 5" drop. but i have the narrower 69 rear axle. the 71/72 axle is about 3/4" wider on each side so you might want a little more back space. 0 offset on a 20x10 is 5.5" bs you may want about a approx 5.75 bs.
|
|
|
|
|
12-09-2013, 08:43 PM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: Clover,SC
Posts: 142
|
Re: I need help on backspacing and off set
I need some pictures too, I would like to do some 24's... I really like the 24x14-15's
|
|
|
|
|
12-10-2013, 12:46 PM
|
#4 |
|
Registered User
Join Date: Oct 2013
Location: Kelowna BC
Posts: 51
|
Re: I need help on backspacing and off set
|
|
|
|
|
12-10-2013, 01:08 PM
|
#5 |
|
Registered User
Join Date: Oct 2013
Location: Kelowna BC
Posts: 51
|
Re: I need help on backspacing and off set
14 wide you will be at least tubbing the rear, narrowed axle and possibly modifing the rear suspension. But i've never gone that far and haven't looked into it.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
