TX '65 Short bed chassis bagged with Porterbuilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red02chevy · 11-11-2013, 09:05 AM

I was building a truck for a customer and he lost interested in the project. We striked up a deal and I ended up with the chassis. The plan was to find a clean truck to buy and build with this chassis but I have too much going on right now. Located in Lubbock, TX.

-The good-
'65 short bed chassis
'71 5 lug rear end (unsure of gear ratio)
'85 front cross member, control arms
'73-'87 3" Belltech drop spindles for 1.25" rotors
New ball joints, new control arm bushings included but not installed
New rotors, bearings, seals, dust caps, hardware
Porterbuilt Stage 1 front suspension
Porterbuillt Stage 2 basic rear suspension
2" drop blocks
All rivets removed and replaced with 7/16" grade 8 hardware (to match Porterbuilt parts)

-The bad-
Cab mounts had some rust where the bushing goes, I have them but didn't install them. I wanted to find a cleaner set or fabricate some. They are definitely use able but were not up to my standards.
No rear brakes
I don't have a set of wheels for it. The Cragars were pulled off another build. I believe I have another set of steel 15" wheels so if purchased we would just need to figure something out on tires.

Asking $2250 as is. That basically covers parts and makes labor free.

Layrokr · 11-14-2013, 10:44 PM

Wish you were closer!

mike14_07 · 11-15-2013, 12:03 AM

if you decide to part it out, i might be interested in the rear set up

red02chevy · 11-15-2013, 12:32 AM

Quote:

Originally Posted by mike14_07

if you decide to part it out, i might be interested in the rear set up

Not really interested in parting anything out. If anything changes I will definitely keep you in mind though

AustinBelair · 11-15-2013, 12:59 AM

Damn! Do you need a high end AR15 rifle by any chance?

red02chevy · 11-15-2013, 01:06 AM

Quote:

Originally Posted by AustinBelair

Damn! Do you need a high end AR15 rifle by any chance?

No sir, sorry! Trades are welcomed though......

107 · 11-24-2013, 12:01 AM

I live in Lubbock and if you decide to part it out I'd be interested in the porterbuilt stuff.
Thanks

red02chevy · 11-24-2013, 12:07 PM

Quote:

Originally Posted by 107

I live in Lubbock and if you decide to part it out I'd be interested in the porterbuilt stuff.
Thanks

Sorry not wanting to part it out. What year truck do you have?

Dinos63 · 11-24-2013, 01:44 PM

that's a great deal

107 · 11-24-2013, 10:55 PM

64 Chevy suburban .

Mad Rods · 11-30-2013, 02:16 PM

I will keep an eye on this thread, if its still available after Christmas I will get in touch with you. Next time I'm in Lubbock I'd like to check out your builds bro. I'm trying to free a weekend up to weld up my Brother in laws ("107") 54 Truck, he lives there too.

red02chevy · 11-30-2013, 03:33 PM

Quote:

Originally Posted by Mad Rods

I will keep an eye on this thread, if its still available after Christmas I will get in touch with you. Next time I'm in Lubbock I'd like to check out your builds bro. I'm trying to free a weekend up to weld up my Brother in laws ("107") 54 Truck, he lives there too.

Cool, I have a few leads on some 60's model trucks but nothing is set in stone so this is currently still available.

Absolutely, you're welcome to come by my shop anytime man. I will PM you my number.

Thanks

CO62C10 · 12-10-2013, 12:25 AM

Have a 1977 c 10 for trade? Located in roswell nm.

red02chevy · 12-28-2013, 10:00 AM

Bump...still have the chassis...

red02chevy · 12-31-2013, 03:29 PM

A few new pictures. Excuse the mess, I am storing it in a buddies storage.

CO62C10 · 12-31-2013, 07:08 PM

What is your shop name?

1963chevyshort · 01-03-2014, 02:04 PM

Would this chassis fit s 64 suburban body?

red02chevy · 01-03-2014, 06:35 PM

Quote:

Originally Posted by 1963chevyshort

Would this chassis fit s 64 suburban body?

Not really sure. I can measure wheel base or anything else that might help you out. Just let me know.

1963chevyshort · 01-06-2014, 04:16 PM

Yeah messure it cause it would be nice just to drop the chassis on it and go.

**Clyde65** · 01-06-2014, 05:08 PM

It wont fit, the suburban has a longer tail to the frame than a SB.

1963chevyshort · 01-06-2014, 06:26 PM

Clyde65 thanks for the help

red02chevy · 01-06-2014, 06:56 PM

Quote:

Originally Posted by 1963chevyshort

Clyde65 thanks for the help

Well I guess it wont work for you. I might end up parting it out if you want any parts off it? I am building another chassis for a local guy and I might be using the rear suspension on it.

red02chevy · 01-13-2014, 12:48 PM

bump....

red02chevy · 01-16-2014, 10:40 PM

One last bump before I part it out...

11-11-2013, 09:05 AM	#1
red02chevy Registered User Join Date: Aug 2007 Location: TX Posts: 499	'65 Short bed chassis bagged with Porterbuilt I was building a truck for a customer and he lost interested in the project. We striked up a deal and I ended up with the chassis. The plan was to find a clean truck to buy and build with this chassis but I have too much going on right now. Located in Lubbock, TX. -The good- '65 short bed chassis '71 5 lug rear end (unsure of gear ratio) '85 front cross member, control arms '73-'87 3" Belltech drop spindles for 1.25" rotors New ball joints, new control arm bushings included but not installed New rotors, bearings, seals, dust caps, hardware Porterbuilt Stage 1 front suspension Porterbuillt Stage 2 basic rear suspension 2" drop blocks All rivets removed and replaced with 7/16" grade 8 hardware (to match Porterbuilt parts) -The bad- Cab mounts had some rust where the bushing goes, I have them but didn't install them. I wanted to find a cleaner set or fabricate some. They are definitely use able but were not up to my standards. No rear brakes I don't have a set of wheels for it. The Cragars were pulled off another build. I believe I have another set of steel 15" wheels so if purchased we would just need to figure something out on tires. Asking $2250 as is. That basically covers parts and makes labor free. __________________

11-14-2013, 10:44 PM	#2
Layrokr Registered User Join Date: Nov 2007 Location: Vancouver, Wa. Posts: 70	Re: '65 Short bed chassis bagged with Porterbuilt Wish you were closer!

11-15-2013, 12:03 AM	#3
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	Re: '65 Short bed chassis bagged with Porterbuilt if you decide to part it out, i might be interested in the rear set up

11-15-2013, 12:59 AM	#5
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 294	Re: '65 Short bed chassis bagged with Porterbuilt Damn! Do you need a high end AR15 rifle by any chance? __________________ My mother is a recent cancer survivor and this truck build is for her

11-24-2013, 12:01 AM	#7
107 Registered User Join Date: Aug 2010 Location: Lubbock, Texas Posts: 18	Re: '65 Short bed chassis bagged with Porterbuilt I live in Lubbock and if you decide to part it out I'd be interested in the porterbuilt stuff. Thanks

11-24-2013, 01:44 PM	#9
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: '65 Short bed chassis bagged with Porterbuilt that's a great deal __________________ CHEVY ONLY... Nothin Else !

11-24-2013, 10:55 PM	#10
107 Registered User Join Date: Aug 2010 Location: Lubbock, Texas Posts: 18	Re: '65 Short bed chassis bagged with Porterbuilt 64 Chevy suburban .

11-30-2013, 02:16 PM	#11
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: '65 Short bed chassis bagged with Porterbuilt I will keep an eye on this thread, if its still available after Christmas I will get in touch with you. Next time I'm in Lubbock I'd like to check out your builds bro. I'm trying to free a weekend up to weld up my Brother in laws ("107") 54 Truck, he lives there too. __________________ Chevy Only Tx.........

12-10-2013, 12:25 AM	#13
CO62C10 Registered User Join Date: Dec 2013 Location: colorado springs,colorado Posts: 12	Re: '65 Short bed chassis bagged with Porterbuilt Have a 1977 c 10 for trade? Located in roswell nm.

12-28-2013, 10:00 AM	#14
red02chevy Registered User Join Date: Aug 2007 Location: TX Posts: 499	Re: '65 Short bed chassis bagged with Porterbuilt Bump...still have the chassis... __________________

12-31-2013, 03:29 PM	#15
red02chevy Registered User Join Date: Aug 2007 Location: TX Posts: 499	Re: '65 Short bed chassis bagged with Porterbuilt A few new pictures. Excuse the mess, I am storing it in a buddies storage. __________________

12-31-2013, 07:08 PM	#16
CO62C10 Registered User Join Date: Dec 2013 Location: colorado springs,colorado Posts: 12	Re: '65 Short bed chassis bagged with Porterbuilt What is your shop name?

01-03-2014, 02:04 PM	#17
1963chevyshort New Member Join Date: Mar 2007 Location: Houston,TX Posts: 261	Re: '65 Short bed chassis bagged with Porterbuilt Would this chassis fit s 64 suburban body? __________________ Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair

01-06-2014, 04:16 PM	#19
1963chevyshort New Member Join Date: Mar 2007 Location: Houston,TX Posts: 261	Re: '65 Short bed chassis bagged with Porterbuilt Yeah messure it cause it would be nice just to drop the chassis on it and go. __________________ Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair

01-06-2014, 05:08 PM	#20
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: '65 Short bed chassis bagged with Porterbuilt It wont fit, the suburban has a longer tail to the frame than a SB. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

01-06-2014, 06:26 PM	#21
1963chevyshort New Member Join Date: Mar 2007 Location: Houston,TX Posts: 261	Re: '65 Short bed chassis bagged with Porterbuilt Clyde65 thanks for the help __________________ Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair

01-13-2014, 12:48 PM	#23
red02chevy Registered User Join Date: Aug 2007 Location: TX Posts: 499	Re: '65 Short bed chassis bagged with Porterbuilt bump.... __________________

01-16-2014, 10:40 PM	#24
red02chevy Registered User Join Date: Aug 2007 Location: TX Posts: 499	Re: '65 Short bed chassis bagged with Porterbuilt One last bump before I part it out... __________________

Register or Log In To remove these advertisements.