PA nos 81-87 inner fenders wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

survivingalone · 01-28-2014, 11:41 AM

looking for a set of driver and pass of nos inner fenders for n 87 chevy. i believe the numbers are gm 15594889 and gm 15594890. anyone?

**brakenit** · 01-28-2014, 12:46 PM

Don't know that I agree with the price but there's a set on eBay.

http://www.ebay.com/itm/NOS-Pair-LH-...2bd31f&vxp=mtr

I drove all the way to OK to pick up a pair with some other sheetmetal last year, at the time it was 1 of only 2 sets that I could find.

survivingalone · 01-28-2014, 01:00 PM

there are two sets on ebay. both shipping costs are crazy. trying to find a set closer to Pennsylvania, somewhere where i could pickup.

survivingalone · 01-30-2014, 01:23 PM

anyone by Pittsburgh?

**1774btcrew** · 01-30-2014, 09:03 PM

Any reason not to just powder coat a used set? Looks as good as factory and holds up a lot better!

**rs74** · 01-30-2014, 09:34 PM

Quote:

Originally Posted by 1774btcrew

Any reason not to just powder coat a used set? Looks as good as factory and holds up a lot better!

Not sure about Pittsburgh but I know even a good used set is hard to find in Illinois it seems. Every set I have had is in good shape except for the big bolt in the rear of the inner fender. They are always rotted out there.

**1774btcrew** · 01-31-2014, 12:07 AM

Quote:

Originally Posted by rs74

Not sure about Pittsburgh but I know even a good used set is hard to find in Illinois it seems. Every set I have had is in good shape except for the big bolt in the rear of the inner fender. They are always rotted out there.

I even have had a hard time here finding nice 80 and earlier inner fenders. The last set I got for a customer it took me pulling 3 sets that looked good before I found a nice pair. Here I haven't noticed any rust issues on 81 and newer sets.

survivingalone · 01-31-2014, 05:32 AM

found a new set in Maryland.....road trip!

LILREDGMC · 01-31-2014, 09:37 AM

Surviving:

I have a set of GM inners from a 83 GMC that came via Indiana from New Mexico. I would have to look at them to determine if they were good enough for you to consider as a blast and paint for your project. I may be at the shop today, if so I will get a few pics and forward them to the site.

LILREDGMC

survivingalone · 01-31-2014, 10:48 AM

i found a set of new nos ones today. if the deal falls through i will pm you. thank you.

01-28-2014, 11:41 AM	#1
survivingalone Registered User Join Date: Jan 2012 Location: Pittsburgh Pennsylvania Posts: 842	nos 81-87 inner fenders wanted looking for a set of driver and pass of nos inner fenders for n 87 chevy. i believe the numbers are gm 15594889 and gm 15594890. anyone?

01-28-2014, 12:46 PM	#2
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	Re: nos 81-87 inner fenders wanted Don't know that I agree with the price but there's a set on eBay. http://www.ebay.com/itm/NOS-Pair-LH-...2bd31f&vxp=mtr I drove all the way to OK to pick up a pair with some other sheetmetal last year, at the time it was 1 of only 2 sets that I could find.

01-28-2014, 01:00 PM	#3
survivingalone Registered User Join Date: Jan 2012 Location: Pittsburgh Pennsylvania Posts: 842	Re: nos 81-87 inner fenders wanted there are two sets on ebay. both shipping costs are crazy. trying to find a set closer to Pennsylvania, somewhere where i could pickup.

01-30-2014, 01:23 PM	#4
survivingalone Registered User Join Date: Jan 2012 Location: Pittsburgh Pennsylvania Posts: 842	Re: nos 81-87 inner fenders wanted anyone by Pittsburgh?

01-30-2014, 09:03 PM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: nos 81-87 inner fenders wanted Any reason not to just powder coat a used set? Looks as good as factory and holds up a lot better! __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

01-31-2014, 05:32 AM	#8
survivingalone Registered User Join Date: Jan 2012 Location: Pittsburgh Pennsylvania Posts: 842	Re: nos 81-87 inner fenders wanted found a new set in Maryland.....road trip!

01-31-2014, 09:37 AM	#9
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Re: nos 81-87 inner fenders wanted Surviving: I have a set of GM inners from a 83 GMC that came via Indiana from New Mexico. I would have to look at them to determine if they were good enough for you to consider as a blast and paint for your project. I may be at the shop today, if so I will get a few pics and forward them to the site. LILREDGMC

01-31-2014, 10:48 AM	#10
survivingalone Registered User Join Date: Jan 2012 Location: Pittsburgh Pennsylvania Posts: 842	Re: nos 81-87 inner fenders wanted i found a set of new nos ones today. if the deal falls through i will pm you. thank you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.