The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > Diesel Conversions

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-24-2014, 09:05 PM   #51
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 86 chevy crew cab 12 valve swap

when it comes to tractors, i want the new stuff. shortly before i escaped farm country, we had an 8520. it was by far the nicest tractor i had ever done work in. made a long night with a five gang v ripper much less fatiguing. and talk about a combine chaser. you could haul a 1000bu cart with that thing and not even know it was there. i really like the 4960s we had(i'd be scared to think of the number of hours i slept behind the wheel of one of those!), and the 4440 that was repowered with a 7220 oil burner was a riot to drive, but id still get in the new one any day over any of the others. to damn many days on a harrow or rake in the 4020 or 4440. but, i cut my teeth on red(and white) tractors, so if i really want to talk about nice implements...
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 03-25-2014, 09:25 AM   #52
gerfunken
Registered User
 
gerfunken's Avatar
 
Join Date: Feb 2009
Location: Surprise, AZ
Posts: 490
Re: 86 chevy crew cab 12 valve swap

Quote:
Originally Posted by ryanroo View Post
when it comes to tractors, i want the new stuff. shortly before i escaped farm country, we had an 8520. it was by far the nicest tractor i had ever done work in. made a long night with a five gang v ripper much less fatiguing. and talk about a combine chaser. you could haul a 1000bu cart with that thing and not even know it was there. i really like the 4960s we had(i'd be scared to think of the number of hours i slept behind the wheel of one of those!), and the 4440 that was repowered with a 7220 oil burner was a riot to drive, but id still get in the new one any day over any of the others. to damn many days on a harrow or rake in the 4020 or 4440. but, i cut my teeth on red(and white) tractors, so if i really want to talk about nice implements...
Sorry, but when the Ryans discuss tractors, all I can picture is this:
__________________
-Scott

1972 Chevy K20
Picture Gallery
Build Thread

1930 Chevy AD
Picture Gallery

1929 Ford Model-A
Picture Gallery

1975 Triumph TR-6
Picture Gallery
gerfunken is offline   Reply With Quote
Old 03-25-2014, 10:40 AM   #53
Dewey72
Registered User
 
Join Date: Jun 2013
Location: Hubbard OR
Posts: 67
Re: 86 chevy crew cab 12 valve swap

The only problem with the 4850 is the stupid leaking ZF front axle! 4960 or 8400 all the way!
Dewey72 is offline   Reply With Quote
Old 03-25-2014, 08:03 PM   #54
COS399
Registered User
 
COS399's Avatar
 
Join Date: Dec 2013
Location: Northern, MT
Posts: 569
Re: 86 chevy crew cab 12 valve swap

That looks like so much fun. I was laughing my *** off through the whole video. I would need a roll cage and I would have had it on it's side or top within the first minute. As for the Ryan's, well it is orange.
COS399 is offline   Reply With Quote
Old 03-25-2014, 08:06 PM   #55
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: 86 chevy crew cab 12 valve swap

Quote:
Originally Posted by COS399 View Post
That looks like so much fun. I was laughing my *** off through the whole video. I would need a roll cage and I would have had it on it's side or top within the first minute. As for the Ryan's, well it is orange.

When I first watched that video I was for sure he was going to roll that unit or at least break an axle. I can't have tractor thoughts in my head without a divorce.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 03-25-2014, 11:04 PM   #56
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 86 chevy crew cab 12 valve swap

Quote:
Originally Posted by gerfunken View Post
Sorry, but when the Ryans discuss tractors, all I can picture is this:
https://www.youtube.com/watch?v=IZZpAO0jP7E&feature=plcp&noredirect=1
the pop phrase "lol" rarely applies when i read the interwebz. as soon as i saw the link to that video though, i did literally laugh.

Quote:
Originally Posted by Dieselwrencher View Post
When I first watched that video I was for sure he was going to roll that unit or at least break an axle. I can't have tractor thoughts in my head without a divorce.
i was waiting for the main drive to **** the bed when i saw that video a while back. as for the tractor thoughts.... win win?
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 03-26-2014, 10:34 AM   #57
Dewey72
Registered User
 
Join Date: Jun 2013
Location: Hubbard OR
Posts: 67
Re: 86 chevy crew cab 12 valve swap

Just saw the video that is freeking cool! Gives guy's bad ideas!
Dewey72 is offline   Reply With Quote
Old 03-26-2014, 06:32 PM   #58
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: 86 chevy crew cab 12 valve swap

Quote:
Originally Posted by Dewey72 View Post
Just saw the video that is freeking cool! Gives guy's bad ideas!
Yes it does! So what company makes slicks in a 30.5?
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 03-26-2014, 07:28 PM   #59
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

I saw that video a few years ago, first thing I thought of was sand dunes. Needs a roll cage though, looks scary in the video
84chevyguyid is offline   Reply With Quote
Old 04-03-2014, 11:35 PM   #60
COS399
Registered User
 
COS399's Avatar
 
Join Date: Dec 2013
Location: Northern, MT
Posts: 569
Re: 86 chevy crew cab 12 valve swap

Any updates on how your wiring is coming???
COS399 is offline   Reply With Quote
Old 04-04-2014, 12:50 AM   #61
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

Since this forum is for diesel conversions, here's one of our creations. Its built on an old White cab over freight truck frame. Has an 1160 cat motor with a 653? allison trans. Drug an old John Deere swather home for some bits and pieces. Its pretty handy around the farm. Everyone around here calls them truck loaders, there's probably a dozen or two running around here. You actually drive them backwards down the road. My friend got pulled over by a state cop for speeding on his, he was doing 65 on a 55 mph road. His doesnt have a cab just a platform, was pretty funny. I put air horns on it to wake the kids in the semi up so they can pull ahead as we load hay on it, very effective!
Attached Images
   

Last edited by 84chevyguyid; 04-04-2014 at 01:06 AM.
84chevyguyid is offline   Reply With Quote
Old 04-04-2014, 01:04 AM   #62
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

I started messing with my trans wiring harness the other day. I am mounting the tcm on the firewall and ran the 20 wires that will go from the tcm to the trans, I cant do both ends of that section of harness because I need the cab on to get closer on the length of those wires. I cant put my cab on because its still sitting on my trailer over at my friends house waiting to be blasted so I can undercoat it. He cant blast it because we have had a bunch of wet weather the past few weeks and the high humidity messes up the sand blaster. The terminals I ordered about a month ago finally came in the other day so I spent half the evening learning how to use my hewdy dewdy 320 dollar wire crimpers and the other half trying to figure out how the 80 pin tcm connector goes together, all in all a productive and somewhat frustrating evening. Now I'm stuck back at waiting for my cab....
Attached Images
    
84chevyguyid is offline   Reply With Quote
Old 04-04-2014, 01:08 AM   #63
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

Drove by this afternoon and its still sitting there....
Attached Images
 
84chevyguyid is offline   Reply With Quote
Old 04-04-2014, 02:56 AM   #64
COS399
Registered User
 
COS399's Avatar
 
Join Date: Dec 2013
Location: Northern, MT
Posts: 569
Re: 86 chevy crew cab 12 valve swap

Glad to see your still getting some stuff done. After looking at what your doing to wire your transmission makes mine look like easy. It's suppose to warm up a little here next week.
COS399 is offline   Reply With Quote
Old 04-05-2014, 11:30 PM   #65
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

Got some stuff done on the core support and radiator. Also got the upper hose figured out, had to use a stock upper hose off the radiator then use a 90 degree elbow to come off the water outlet on the motor. I needed to splice the two together with a piece of 1 3/4 exhaust tubing and whipped up this little tool for stamping a bead on the tubing to help hold the hoses on, worked pretty good.
Attached Images
     
84chevyguyid is offline   Reply With Quote
Old 04-05-2014, 11:32 PM   #66
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

the tool
Attached Images
  
84chevyguyid is offline   Reply With Quote
Old 04-06-2014, 12:13 AM   #67
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: 86 chevy crew cab 12 valve swap

Nice work and nice bead roller!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-12-2014, 10:54 PM   #68
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

Well today turned out to be a good day. I got my cab back from the sandblaster thurs night and had big plans to take yesterday afternoon off work and get it undercoated but it didnt work out. The weather forecast for fri was sunshine and light winds but the wind blew 30 mph all afternoon and because I have to paint underneath stuff outside,it was a no go. The forcast for today was cloudy and windy and it is supposed to stay that way for a week, yuk! I got ready to do it just in case the weather guy was wrong and I lucked out. By 11 am it was 60 degrees,sunny and no wind so I got it done!! I used the ton straw bales for safety stands so I dared work underneath it,held it up a few inches off the bales so I could get to everything. The only thing I am kinda bummed about is the "red" my buddy gave me to tint the U-POL bedliner with turned out to be kind of purple looking. I guess after it gets oil splattered and muddy, ect,it will look ok....
Attached Images
    
84chevyguyid is offline   Reply With Quote
Old 04-12-2014, 11:03 PM   #69
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

The weather stayed nice for part of the afternoon so after the cab dried a couple of hours, I rolled the chassis outside and got the cab bolted down. Grabbed the fenders and got them stuck on and rolled it back in the shop just as it started to blow and rain. Its exciting to see it start looking like a pickup again!
Attached Images
     
84chevyguyid is offline   Reply With Quote
Old 04-13-2014, 07:17 AM   #70
brimc
Registered User
 
brimc's Avatar
 
Join Date: Jun 2013
Location: New Lowell, Ontario, Canada
Posts: 248
Re: 86 chevy crew cab 12 valve swap

The truck is looking really good! It is a great cab when you only have to spray after sandblasting. No chance of that ever happening around here. What did you use to prep/paint the sandblasted area? Did you apply tinted bed liner directly onto the bare metal? I will be doing this to my cab real soon also. Again looks real good
__________________
BRIAN

1986 Chevrolet K20 Silverado 12 Valve CUMMINS P Pumped Intercooled/Getrag360/Divorced NP205/10B/14BFF Detroit Locker - DD Canadian Winter Beater.

My Chevrolet CUMMINS Build http://67-72chevytrucks.com/vboard/s...d.php?t=585509
brimc is offline   Reply With Quote
Old 04-16-2014, 08:39 PM   #71
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: 86 chevy crew cab 12 valve swap

Great work and that is a huge step forward on the build!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-17-2014, 08:45 AM   #72
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

The cab is in pretty good shape. My friend that sandblasted it gave me some epoxy primer to spray first but he also said he does rinolining on bare metal. The epoxy he had says you are supposed to mix it up then wait one hour, spray it, then wait 3 hours before you undercoat over it. I thought if he sprays rinolining on bare metal and its fine, I will try that with this stuff. Its not going to be having things loaded on it or drug across it like a bed would anyway and I didnt think I had that much time given the forecast so I just gave it two good coats and called it good.
84chevyguyid is offline   Reply With Quote
Old 04-21-2014, 11:38 PM   #73
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

Went on a road trip fri and sat and came home from Oregon with this. 82 kenworth with a 400 cummins and a 9 speed. Its going to be my new hay hauling truck. And no electronics!
Attached Images
 
84chevyguyid is offline   Reply With Quote
Old 04-24-2014, 03:19 PM   #74
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: 86 chevy crew cab 12 valve swap

That's nice and looks pretty clean!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-26-2014, 11:04 PM   #75
84chevyguyid
Registered User
 
Join Date: Feb 2012
Location: Mud Lake, Idaho
Posts: 346
Re: 86 chevy crew cab 12 valve swap

I went junkyarding fri and got a few bits and pieces for intake tubing. Coming off the turbo, the cast elbow isnt quite 90 degrees and a 90 degree elbow would make the connection lots better and keep the piping out of the inner fender. I found a pic of the elbow I need but dont know where to get it from. Any Ideas?
Attached Images
  
84chevyguyid is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com