WA Billet Alum Radio Dash Plate-Repair or Dress Up - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ryanroo · 02-16-2013, 08:08 PM

no rush for me! looking forward to it though

Ryan

Street Smart · 02-16-2013, 08:36 PM

I`d like to get one with the cut out if there`s enough to go around.
Please let me know, PayPal ready.

ChevyCruizer · 02-17-2013, 12:29 AM

i want one (if available) please PM me if I can get one with paypment information.

will be for a modern radio

BigMike · 02-23-2013, 04:26 AM

A couple questions...

x2 on IAFF2407's question - Does the ashtray close all the way? Looks like it may hit the bottom of the bezel.

Secondly, will this work with the factory air vent that is above it?

Thanks

Mike

**PICKMUP** · 02-24-2013, 01:00 AM

If you look at the pics, you see we cut a uniform bevel all around the plate. There is no "cutout" for the ashtray. That would just be crude. I haven't checked it for clearance with an AC center vent...maybe you can also tell that by looking at the pics.

More coming soon!

Street Smart · 02-25-2013, 07:01 AM

Kool, please put me on the list.

knomadd · 02-25-2013, 04:39 PM

Does this sit on top of the indented area for the stock radio, or sit inside of it? It looks like it sits on top of the indent, but I'm not really sure.

magntik · 03-13-2013, 09:51 AM

Quote:

Originally Posted by magntik

I want one, cut out for radio.

Thanks

I'm sorry but I'm out. Thanks anyway.

**PICKMUP** · 03-13-2013, 03:31 PM

Quote:

Originally Posted by magntik

I'm sorry but I'm out. Thanks anyway.

Just go ahead and "DELETE" any postings you have on here to help clean up the thread. thanks, frank

MrHotRod5263 · 04-06-2013, 10:34 PM

just want to solidify my request for one. keep me on the list for one cut for a modern DIN radio

FriscoDave · 06-30-2013, 03:57 PM

Put me down for one when the next batch is made. Thanks

SEVENDUECE · 01-17-2014, 02:02 PM

DI'm really interested in these, do you have any available?

bowtieboy2 · 01-17-2014, 09:18 PM

just talked to you frank i would like to buy a radio plate when you get them call me at (502)396-9918 shawn in kentucky

1971 3/4TON · 02-16-2014, 03:53 PM

Frank, if you can get me one that is polished neatly all over the front and edges, I definitely want one. The brushed looks very nice, but it's just not fitting for my interior. I am prepared to send you a PayPal payment immediately. No excuses here, when time to pay. Please just let me know, either way. Thanks. -Dylan

1971 3/4TON · 02-16-2014, 03:56 PM

Feel free to call me at 817-863-8135. Thanks. -Dylan

**cmabolt** · 08-26-2014, 08:01 AM

I'm interested, when is next run???

Chris

**PICKMUP** · 08-26-2014, 12:04 PM

I have one left. There will not be any more of these. The machine shop flaked out and the cost to retool again is too high. Someone else makes a nice one on here, so no need for these also. Send me a PayPal if you would like the last one: $75 raw or $95 polished edges & brushed. thanks, frank

**cmabolt** · 08-26-2014, 06:19 PM

Thanks Frank. I'll take it. Just raw metal. I will brush it myself. I'll send ya a PM once I get ya paid on paypal.

Thanks for the quick response.
Chris

02-16-2013, 08:08 PM	#51
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: Billet Alum Radio Dash Plate-Repair or Dress Up no rush for me! looking forward to it though Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

02-16-2013, 08:36 PM	#52
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Billet Alum Radio Dash Plate-Repair or Dress Up I`d like to get one with the cut out if there`s enough to go around. Please let me know, PayPal ready. __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

02-17-2013, 12:29 AM	#53
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: Billet Alum Radio Dash Plate-Repair or Dress Up i want one (if available) please PM me if I can get one with paypment information. will be for a modern radio __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

02-23-2013, 04:26 AM	#54
BigMike Registered User Join Date: Sep 2004 Location: Rancho Santa Margarita - SoCal Posts: 1,432	Re: Billet Alum Radio Dash Plate-Repair or Dress Up A couple questions... x2 on IAFF2407's question - Does the ashtray close all the way? Looks like it may hit the bottom of the bezel. Secondly, will this work with the factory air vent that is above it? Thanks Mike __________________ Mike My 69 SWB Project Father/Son 72 Nova Project My Airbrushed RC Car Bodies

02-24-2013, 01:00 AM	#55
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Re: Billet Alum Radio Dash Plate-Repair or Dress Up If you look at the pics, you see we cut a uniform bevel all around the plate. There is no "cutout" for the ashtray. That would just be crude. I haven't checked it for clearance with an AC center vent...maybe you can also tell that by looking at the pics. More coming soon! __________________ Email: frankeham@comcast.net Phone: 360-956-7170

02-25-2013, 07:01 AM	#56
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Billet Alum Radio Dash Plate-Repair or Dress Up Kool, please put me on the list. __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

02-25-2013, 04:39 PM	#57
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Billet Alum Radio Dash Plate-Repair or Dress Up Does this sit on top of the indented area for the stock radio, or sit inside of it? It looks like it sits on top of the indent, but I'm not really sure. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

04-06-2013, 10:34 PM	#60
MrHotRod5263 Registered User Join Date: Jul 2012 Location: Bossier City , La. Posts: 31	Re: Billet Alum Radio Dash Plate-Repair or Dress Up just want to solidify my request for one. keep me on the list for one cut for a modern DIN radio

06-30-2013, 03:57 PM	#61
FriscoDave Registered User Join Date: Dec 2008 Location: Frisco, CA. Posts: 68	Re: Billet Alum Radio Dash Plate-Repair or Dress Up Put me down for one when the next batch is made. Thanks

01-17-2014, 02:02 PM	#62
SEVENDUECE Registered User Join Date: May 2011 Location: HUMBLE,TX Posts: 19	Re: Billet Alum Radio Dash Plate-Repair or Dress Up DI'm really interested in these, do you have any available?

01-17-2014, 09:18 PM	#63
bowtieboy2 Registered User Join Date: Jul 2012 Location: mt.washington,ky Posts: 13	Re: Billet Alum Radio Dash Plate-Repair or Dress Up just talked to you frank i would like to buy a radio plate when you get them call me at (502)396-9918 shawn in kentucky

02-16-2014, 03:53 PM	#64
1971 3/4TON Registered User Join Date: Jan 2014 Location: Midland, Texas Posts: 38	Re: Billet Alum Radio Dash Plate-Repair or Dress Up Frank, if you can get me one that is polished neatly all over the front and edges, I definitely want one. The brushed looks very nice, but it's just not fitting for my interior. I am prepared to send you a PayPal payment immediately. No excuses here, when time to pay. Please just let me know, either way. Thanks. -Dylan

02-16-2014, 03:56 PM	#65
1971 3/4TON Registered User Join Date: Jan 2014 Location: Midland, Texas Posts: 38	Re: Billet Alum Radio Dash Plate-Repair or Dress Up Feel free to call me at 817-863-8135. Thanks. -Dylan

08-26-2014, 08:01 AM	#66
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: Billet Alum Radio Dash Plate-Repair or Dress Up I'm interested, when is next run??? Chris __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

08-26-2014, 12:04 PM	#67
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Re: Billet Alum Radio Dash Plate-Repair or Dress Up I have one left. There will not be any more of these. The machine shop flaked out and the cost to retool again is too high. Someone else makes a nice one on here, so no need for these also. Send me a PayPal if you would like the last one: $75 raw or $95 polished edges & brushed. thanks, frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

08-26-2014, 06:19 PM	#68
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: Billet Alum Radio Dash Plate-Repair or Dress Up Thanks Frank. I'll take it. Just raw metal. I will brush it myself. I'll send ya a PM once I get ya paid on paypal. Thanks for the quick response. Chris __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

Register or Log In To remove these advertisements.