|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-19-2014, 03:16 PM
|
#1 |
|
Registered User
Join Date: Mar 2014
Location: Mechanicsville, Virginia
Posts: 65
|
1984 k10 traction bars or other ideas
I have a 1984 k10 short bed. looking for some help with a traction bar or something to prevent axle wrap and help traction. I know off road design makes one i was hoping maybe someone could help give me ideas to make one and other routes i would prefer two bars (the look is sweet). its stock height now but plan on going with four inch lift.
This is off road designs setup. If yall are running something simuilar please hake pictures |
|
|
|
08-19-2014, 10:32 PM
|
#2 |
|
Registered User
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
|
Re: 1984 k10 traction bars or other ideas
Have you looked at http://www.landlproducts.com/list.aspx?cID=5
|
|
|
|
|
08-20-2014, 07:30 AM
|
#3 |
|
Registered User
Join Date: Mar 2014
Location: Mechanicsville, Virginia
Posts: 65
|
Re: 1984 k10 traction bars or other ideas
i have not thank you
|
|
|
|
|
08-26-2014, 03:13 PM
|
#4 |
|
Registered User
Join Date: Aug 2013
Location: San Jose Ca
Posts: 965
|
Re: 1984 k10 traction bars or other ideas
My 84 K20 had the same problem I install double shocks 1 on each side of the rear axle.
solved the problem it had BB454. |
|
|
|
|
08-26-2014, 04:50 PM
|
#5 |
|
Registered User
Join Date: Mar 2014
Location: Mechanicsville, Virginia
Posts: 65
|
Re: 1984 k10 traction bars or other ideas
Did you get a kit or custom do you happen to have pictures
|
|
|
|
|
08-26-2014, 11:35 PM
|
#6 |
|
Registered User
Join Date: Aug 2013
Location: San Jose Ca
Posts: 965
|
Re: 1984 k10 traction bars or other ideas
I made my own parts out of 1/4" plate steel and welded them to the axle. drilled holes in the frame to match the stock location and bolted the 2 shocks in place. I don't have any pictures.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
