3.07 rearend - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 01-15-2004, 11:18 PM

Looking for a 3.07 12 bolt for a 1/2 ton rear end posi or one legger only in nevada, california,oregon or washington. Will pick up.

Thanks

Martin64 · 01-16-2004, 02:40 AM

Quote:

Looking for a 3.07 rear end

....same here, seems most of them aren't in Ca....

skokie · 01-16-2004, 02:42 AM

I have noticed that to. Thats why I said California, Washington, Oregon, & Nevada. My 68 needs to be driven.

skokie · 01-16-2004, 03:15 AM

BTW lets add Arizona to the list.

stelth2002 · 01-16-2004, 03:16 AM

I just sold one in my other truck. I do however have a ring and pinion for a 3.07, its used

skokie · 01-16-2004, 03:32 AM

Stelth2002 I would need the carrier to I belive since I currently have a 3.73.

724x4a/cchevy · 01-16-2004, 11:29 AM

I have a question. Is it better to have a high gear ratio like 4:11, or is it better to have something like a 3:08?? Which one will allow for fewer rpms at higher speeds?

boraxman · 01-16-2004, 11:45 AM

Quote:

Originally posted by 724x4a/cchevy
I have a question. Is it better to have a high gear ratio like 4:11, or is it better to have something like a 3:08?? Which one will allow for fewer rpms at higher speeds?

In this case 3.08.

**67sss** · 01-16-2004, 06:31 PM

Like this...............it's a 3:07 but all the brake parts are missing. PM me if interested, also have a leaf 6 lug for a blazer?...I think...bought it to put in a 68 GMC 1/2t but the perches we're to far apart for the GMC.

ooppss. this pic is another leaf that came out of that 68 GMC, lets see if I have a coil rearend pic.

**67sss** · 01-16-2004, 06:34 PM

yo

skokie · 01-16-2004, 08:35 PM

Is that a leaf?

skokie · 01-17-2004, 12:57 AM

Well I found one here locally. I am going to go look at it tomorrow. If its no good I will post back.

Thanks

**67sss** · 01-17-2004, 01:41 AM

not yet, but if someone is interested I can get one, also can get it delivered to So. Ca. cheapier than you can drive to get it.

smonty · 01-17-2004, 02:56 AM

I have a good 3.07 gear set w/carrier, spacers and spiders if you want to install them in your 12 bolt rear end. Will take $25.00 plus shipping for them.

Ernie
smonty46@hotmail.com

01-15-2004, 11:18 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	3.07 rearend Looking for a 3.07 12 bolt for a 1/2 ton rear end posi or one legger only in nevada, california,oregon or washington. Will pick up. Thanks Last edited by skokie; 01-16-2004 at 02:57 AM.

01-16-2004, 02:42 AM	#3
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	I have noticed that to. Thats why I said California, Washington, Oregon, & Nevada. My 68 needs to be driven. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-16-2004, 03:15 AM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	BTW lets add Arizona to the list. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-16-2004, 03:16 AM	#5
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I just sold one in my other truck. I do however have a ring and pinion for a 3.07, its used __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

01-16-2004, 03:32 AM	#6
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	Stelth2002 I would need the carrier to I belive since I currently have a 3.73. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-16-2004, 11:29 AM	#7
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	I have a question. Is it better to have a high gear ratio like 4:11, or is it better to have something like a 3:08?? Which one will allow for fewer rpms at higher speeds? __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

01-16-2004, 06:31 PM	#9
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	rearend Like this...............it's a 3:07 but all the brake parts are missing. PM me if interested, also have a leaf 6 lug for a blazer?...I think...bought it to put in a 68 GMC 1/2t but the perches we're to far apart for the GMC. ooppss. this pic is another leaf that came out of that 68 GMC, lets see if I have a coil rearend pic. Attached Images Last edited by 67sss; 01-17-2004 at 01:33 AM.

01-16-2004, 06:34 PM	#10
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	leaf yo Attached Images

01-16-2004, 08:35 PM	#11
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	Is that a leaf?

01-17-2004, 12:57 AM	#12
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	Well I found one here locally. I am going to go look at it tomorrow. If its no good I will post back. Thanks __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-17-2004, 01:41 AM	#13
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	coil---3:07 not yet, but if someone is interested I can get one, also can get it delivered to So. Ca. cheapier than you can drive to get it.

01-17-2004, 02:56 AM	#14
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	3.07 I have a good 3.07 gear set w/carrier, spacers and spiders if you want to install them in your 12 bolt rear end. Will take $25.00 plus shipping for them. Ernie smonty46@hotmail.com __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.