NE Cutting up 73-80 4x4 frame - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stepside Man · 10-20-2014, 04:39 PM

Lets do it!

Send me paypal info via PM

Stepside Man · 10-21-2014, 04:23 PM

Paypal sent.

JayJayB · 10-25-2014, 01:00 AM

I would like to ask if I could get the bed mounting brackets, if they are available. My zip is 78602.

thinair · 10-25-2014, 01:59 PM

Quote:

Originally Posted by JayJayB

I would like to ask if I could get the bed mounting brackets, if they are available. My zip is 78602.

Frame is all cut up and gone now, except the two front cross members, I still have those. And just because I am curious, do you have a picture of "bed mounting brackets"?

JayJayB · 10-25-2014, 03:31 PM

Unfortunately, I do not. They would have been located under the bed, closest to the cab.

74CustomK20 · 10-28-2014, 05:26 AM

Thinair, this is 79betty i had to make anew acct due to password problems. I sent you 43.00 for the crossmember.

thinair · 10-28-2014, 12:40 PM

Quote:

Originally Posted by 74CustomK20

Thinair, this is 79betty i had to make anew acct due to password problems. I sent you 43.00 for the crossmember.

I have received the payment.

Stepside Man · 11-02-2014, 09:20 PM

When should I expect to see my frame parts?

74CustomK20 · 11-02-2014, 09:33 PM

Recieved the crossmember, after a little massaging it'll work out just great. Thank you

thinair · 11-02-2014, 11:56 PM

Quote:

Originally Posted by Stepside Man

When should I expect to see my frame parts?

Without looking at FedEx I would say probably tomorrow, Monday. The other guy received his and they went out on the same day.

Stepside Man · 11-05-2014, 11:50 AM

I got a box from Fed Ex yesterday but it only had one side in it.

Should I expect the other side today?

thinair · 11-05-2014, 01:11 PM

Quote:

Originally Posted by Stepside Man

I got a box from Fed Ex yesterday but it only had one side in it.

Should I expect the other side today?

was there a huge hole in the box? both sides were in that box.....

Stepside Man · 11-05-2014, 07:45 PM

Describe the Box. I only got one side.

thinair · 11-05-2014, 10:24 PM

Mr Coffee or some brand coffee maker box. Styrofoam all around inside. Both side are in the box

Stepside Man · 11-06-2014, 07:42 AM

The coffee box was way to thin for shipping those frame parts.

It showed up with tape all over it, but it was inside another bigger sturdy box with a second shipping label on it.

I really need that other side. See if Fed Ex can track it down.

Otherwise, I got half the parts, just refund half the cost, and i will try to find the other one.

If you want pictures of the other outside box, I will send them to you.

thinair · 11-06-2014, 03:05 PM

Here is how this goes. We both have to call FedEx and tell them what happened. If they cannot find the other side, they will refund the money.

thinair · 11-06-2014, 05:09 PM

I called FedEx and got a claim started. #1106939898

Stepside Man · 11-08-2014, 03:10 PM

Am I supposed to call them also?

thinair · 11-09-2014, 12:14 AM

Quote:

Originally Posted by Stepside Man

Am I supposed to call them also?

it probably wouldn't hurt. maybe just tell them that you want to know where your part is.

Stepside Man · 11-21-2014, 12:09 PM

It been two weeks. Pretty clear that Fed Ex is not going to find the other frame section. Just refund me half what I paid and I will continue to look for another radiator support.

Thanks.

thinair · 11-21-2014, 02:01 PM

[QUOTE=Stepside Man;6926947]It been two weeks. Pretty clear that Fed Ex is not going to find the other frame section. Just refund me half what I paid and I will continue to look for another radiator support.

Thanks.[/QUOT

I made copies of all of the paperwork that fedex wanted and sent them in the other day. Fedex will pay the refund plus some of the shipping.

10-20-2014, 04:39 PM	#26
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame Lets do it! Send me paypal info via PM __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1

10-21-2014, 04:23 PM	#27
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame Paypal sent. __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1

10-25-2014, 01:00 AM	#28
JayJayB Registered User Join Date: Oct 2014 Location: Smithville, TX Posts: 76	Re: Cutting up 73-80 4x4 frame I would like to ask if I could get the bed mounting brackets, if they are available. My zip is 78602.

10-25-2014, 03:31 PM	#30
JayJayB Registered User Join Date: Oct 2014 Location: Smithville, TX Posts: 76	Re: Cutting up 73-80 4x4 frame Unfortunately, I do not. They would have been located under the bed, closest to the cab.

10-28-2014, 05:26 AM	#31
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Cutting up 73-80 4x4 frame Thinair, this is 79betty i had to make anew acct due to password problems. I sent you 43.00 for the crossmember.

11-02-2014, 09:20 PM	#33
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame When should I expect to see my frame parts? __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1

11-02-2014, 09:33 PM	#34
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Cutting up 73-80 4x4 frame Recieved the crossmember, after a little massaging it'll work out just great. Thank you

11-05-2014, 11:50 AM	#36
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame I got a box from Fed Ex yesterday but it only had one side in it. Should I expect the other side today? __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1

11-05-2014, 07:45 PM	#38
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame Describe the Box. I only got one side. __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1

11-05-2014, 10:24 PM	#39
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 997	Re: Cutting up 73-80 4x4 frame Mr Coffee or some brand coffee maker box. Styrofoam all around inside. Both side are in the box

11-06-2014, 07:42 AM	#40
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame The coffee box was way to thin for shipping those frame parts. It showed up with tape all over it, but it was inside another bigger sturdy box with a second shipping label on it. I really need that other side. See if Fed Ex can track it down. Otherwise, I got half the parts, just refund half the cost, and i will try to find the other one. If you want pictures of the other outside box, I will send them to you. __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1

11-06-2014, 03:05 PM	#41
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 997	Re: Cutting up 73-80 4x4 frame Here is how this goes. We both have to call FedEx and tell them what happened. If they cannot find the other side, they will refund the money.

11-06-2014, 05:09 PM	#42
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 997	Re: Cutting up 73-80 4x4 frame I called FedEx and got a claim started. #1106939898

11-08-2014, 03:10 PM	#43
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame Am I supposed to call them also? __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1

11-21-2014, 12:09 PM	#45
Stepside Man Registered User Join Date: Jun 2013 Location: Derry NH Posts: 117	Re: Cutting up 73-80 4x4 frame It been two weeks. Pretty clear that Fed Ex is not going to find the other frame section. Just refund me half what I paid and I will continue to look for another radiator support. Thanks. __________________ 1977 K10 6ft Stepside L6 1978 C10 8ft Stepside 400 1980 C10 8ft Widebox with Uncle L6 1986 K35 Not a dually 350; 79 K20 Stripped 1973 and 1976 Chevy Truck Trailers 1995 Impala SS LT1



Register or Log In To remove these advertisements.

11-21-2014, 02:01 PM	#46
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 997	Re: Cutting up 73-80 4x4 frame [QUOTE=Stepside Man;6926947]It been two weeks. Pretty clear that Fed Ex is not going to find the other frame section. Just refund me half what I paid and I will continue to look for another radiator support. Thanks.[/QUOT I made copies of all of the paperwork that fedex wanted and sent them in the other day. Fedex will pay the refund plus some of the shipping.

Register or Log In To remove these advertisements.