Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
11-30-2014, 10:26 PM | #1 |
Registered User
Join Date: Sep 2010
Location: South Jordan, UT
Posts: 162
|
Re: Pink's 68/72 - Dropmember Equipped Build
Hey guys, I started installing the notches for the rack and pinion. I trimmed them down almost an inch to get rid of the overhang. I plan on grinding the outside welds flush so they don't look welded in. I stole the idea from toocrazy and his awesome 69 slammed, 22"/24" bbc shaved clean build
I've also been practicing my welding and it's starting to pay off. |
12-16-2014, 10:33 PM | #2 |
Registered User
Join Date: Sep 2010
Location: South Jordan, UT
Posts: 162
|
Re: Pink's 68/72 - Dropmember Equipped Build
I haven't got as much done on the truck lately as I'd like but at least I made a little progress.
I got both rack notches welded in and started grinding down the welds smooth. I also started filling some of the holes in the frame. It's going to take forever to fill all these holes in. I also got the rear notches fully bolted in so I was finally able to start cutting out the old frame. |
12-22-2014, 02:40 PM | #3 |
Registered User
Join Date: Sep 2010
Location: South Jordan, UT
Posts: 162
|
Re: Pink's 68/72 - Dropmember Equipped Build
Finally got the old frame sections cut out and flush with the step notches. I also cut the back sections off the frame in preparation for the new body drop rear sections.
|
12-22-2014, 08:51 PM | #4 |
Registered User
Join Date: Sep 2010
Location: South Jordan, UT
Posts: 162
|
Re: Pink's 68/72 - Dropmember Equipped Build
Rear body drop brackets and crossmember almost completely installed
|
Bookmarks |
|
|