Rear fender bolt size? 47-53 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**youngrodder** · 02-25-2011, 11:16 AM

What is the size of the bolts that hold the rear fenders to the bedsides?
Thank you for your help.

Marc

mr48chev · 02-25-2011, 01:09 PM

5/16 x 3/4 if you use bolts or machine screws with a screw head from the hardware store.

I'd suggest buying a set of the right bolts from one of the truck parts suppliers though as the others never look quite right to me and I have run the wrong ones with slotted screw heads for close to 30 years.

**youngrodder** · 02-25-2011, 02:03 PM

Quote:

Originally Posted by mr48chev

5/16 x 3/4 if you use bolts or machine screws with a screw head from the hardware store.

I'd suggest buying a set of the right bolts from one of the truck parts suppliers though as the others never look quite right to me and I have run the wrong ones with slotted screw heads for close to 30 years.

mr48chevy-

Thanks, I have something in mind with some specilty washers and I wanted to make sure I have the correct size prior to ordering them.

I apprecaite the reply...
Marc

BigJock · 02-25-2011, 06:06 PM

youngrodder, sorry to get all European and metric,but I drilled out my fender holes to 10mm and used 10x25mm Button head stainless bolts with stainless nyloc nuts and washers.
I've polished them up(real easy with a sisal buff and white rouge)

Seeing as you're obviously going down the custom route,you should be able to get something similar in the U.S.A. but in more familiar UNF sizes.

bretcopsey · 02-25-2011, 06:21 PM

I have been able to find stainless button head bolts in the local hardware stores "Hillman" selection that might look good polished up...

**youngrodder** · 02-25-2011, 11:44 PM

Thanks for all of the suggestions. I will post some pics of my idea once my specialty washers come in.

Marc

mr48chev · 02-26-2011, 03:55 PM

Those Stainless Buttonhead screws do look good when you put them in places where they show.

fisherman420 · 12-05-2014, 07:00 AM

Quote:

Originally Posted by youngrodder

Thanks for all of the suggestions. I will post some pics of my idea once my specialty washers come in.

Marc

what hardware did you end up using on your rear fenders? As mine sits in mock-up I'm just using a few standard 5/16" bolts and fender washers

02-25-2011, 11:16 AM	#1
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,758	Rear fender bolt size? 47-53 What is the size of the bolts that hold the rear fenders to the bedsides? Thank you for your help. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

02-25-2011, 01:09 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,342	Re: Rear fender bolt size? 47-53 5/16 x 3/4 if you use bolts or machine screws with a screw head from the hardware store. I'd suggest buying a set of the right bolts from one of the truck parts suppliers though as the others never look quite right to me and I have run the wrong ones with slotted screw heads for close to 30 years.

02-25-2011, 06:06 PM	#4
BigJock Registered User Join Date: Aug 2010 Location: Dundonald, Scotland Posts: 120	Re: Rear fender bolt size? 47-53 youngrodder, sorry to get all European and metric,but I drilled out my fender holes to 10mm and used 10x25mm Button head stainless bolts with stainless nyloc nuts and washers. I've polished them up(real easy with a sisal buff and white rouge) Seeing as you're obviously going down the custom route,you should be able to get something similar in the U.S.A. but in more familiar UNF sizes. Last edited by BigJock; 02-25-2011 at 06:06 PM.

02-25-2011, 06:21 PM	#5
bretcopsey Registered User Join Date: Oct 2005 Location: dayton, oh Posts: 327	Re: Rear fender bolt size? 47-53 I have been able to find stainless button head bolts in the local hardware stores "Hillman" selection that might look good polished up... __________________ My 51 project http://www.cardomain.com/ride/2285825 My 68 Camaro project http://www.cardomain.com/ride/2277404/1 Last edited by bretcopsey; 02-28-2011 at 11:05 AM. Reason: spelling

02-25-2011, 11:44 PM	#6
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,758	Re: Rear fender bolt size? 47-53 Thanks for all of the suggestions. I will post some pics of my idea once my specialty washers come in. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

02-26-2011, 03:55 PM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,342	Re: Rear fender bolt size? 47-53 Those Stainless Buttonhead screws do look good when you put them in places where they show.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.