OR garage sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pdxhall** · 09-08-2014, 06:42 PM

Quote:

Originally Posted by rideblue00

what are the specs on the alternator? Still work?

The alternator is the original Delco Remy from my truck Not sure of the specs. The truck was a runner when I pulled it apart. the alternator has been on a shelf in the garage ever since.

Quote:

Originally Posted by tbagger61

Are the motor chassis mounts and motor mounts still available? Ship to 28227

Yes, they are still available.

**pdxhall** · 09-08-2014, 07:16 PM

Quote:

Originally Posted by tbagger61

Are the motor chassis mounts and motor mounts still available? Ship to 28227

Yes they are.
For the chassis and engine perches, and mounts, shipping is 11.50 to you for a total of $46.50.

**rideblue00** · 09-09-2014, 11:45 AM

the specs are stamped on the outside diameter of it.

1963c-10 · 09-11-2014, 11:28 AM

Still need shipping on the shift rods. Have payment available.

**pimpston65** · 09-11-2014, 01:47 PM

stull need ur info for payment.

tbagger61 · 09-11-2014, 03:14 PM

Need payment info.

**LostMy65** · 09-11-2014, 04:04 PM

What transmission did you have before you got your 700r?
If it was a 3 speed column and you still have it, I might be interested.

rickoner · 09-11-2014, 04:45 PM

Got the tailgate chains today. They're nice and way better than the ones I have. Thanks.

**pdxhall** · 09-11-2014, 09:33 PM

Quote:

Originally Posted by tbagger61

Need payment info.

pm sent. Thanks.

**pdxhall** · 09-11-2014, 09:46 PM

Quote:

Originally Posted by LostMy65

What transmission did you have before you got your 700r?
If it was a 3 speed column and you still have it, I might be interested.

it was a 3speed on the column. The trans is long gone but I have all of the linkage, the column, bellhousing, and flywheel.

Quote:

Originally Posted by 1963c-10

Still need shipping on the shift rods. Have payment available.

Sorry, I kind of forgot. I'll get you the info by tomorrow. Thanks for your patience.

Quote:

Originally Posted by pimpston65

stull need ur info for payment.

I've had a hard time finding a box that the one crazy bent fuel line would fit in. I can get it in a large flat rate for 16.00. Payment info sent if you're still interested.

catneck · 09-11-2014, 10:09 PM

Seat Belts arrived quickly, thanks!

1963c-10 · 09-12-2014, 01:50 PM

No problem. Going to help Austin get his 63 back on the column and get rid of the Saginaw and cheap floor shifter. So I gave him my factory 3 speed column but I got rid of the rods a few months back thinking I was done with them.

Bomp · 09-13-2014, 07:05 PM

Im interested in the seat tracks and intake manifold.
Ill take the exhaust manifold too if you have it.
pm sent.

**pdxhall** · 09-17-2014, 01:02 AM

Okay, this stuff has been up for about a week. Help me move this stuff. Any reasonable offer accepted. Anything not gone in the next couple of weeks is going to the scrap metal yard. I can provide better pics or info if needed. thanks.

Steaksauce · 09-17-2014, 06:02 PM

Pm'd you on a couple things

**pdxhall** · 09-24-2014, 07:31 PM

All parts paid for have now been shipped.
Steaksauce, I sent you a pm.

I'm letting this thread die at this point. I still have parts for sale that I will update and post separately now that they have been thinned out a bit.
Thanks,
Brett

jlampka · 12-27-2014, 07:26 PM

need to know the ctr to ctr hole dimensions on the fan........I have a wrong fan for my 1967 250 engine...also how much shipped to 14120 if the holes fit my water pump?

Thanks.

09-09-2014, 11:45 AM	#28
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,856	Re: garage sale the specs are stamped on the outside diameter of it.

09-11-2014, 11:28 AM	#29
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: garage sale Still need shipping on the shift rods. Have payment available. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

09-11-2014, 01:47 PM	#30
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: garage sale stull need ur info for payment.

09-11-2014, 03:14 PM	#31
tbagger61 Registered User Join Date: Aug 2014 Location: Charlotte, NC Posts: 9	Re: garage sale Need payment info.

09-11-2014, 04:04 PM	#32
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,507	Re: garage sale What transmission did you have before you got your 700r? If it was a 3 speed column and you still have it, I might be interested. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-11-2014, 04:45 PM	#33
rickoner Registered User Join Date: Apr 2014 Location: pittsburgh, pa Posts: 258	Re: garage sale Got the tailgate chains today. They're nice and way better than the ones I have. Thanks.

09-11-2014, 10:09 PM	#36
catneck Registered User Join Date: Sep 2014 Location: Ashland, Oregon Posts: 8	Re: garage sale Seat Belts arrived quickly, thanks!

09-12-2014, 01:50 PM	#37
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: garage sale No problem. Going to help Austin get his 63 back on the column and get rid of the Saginaw and cheap floor shifter. So I gave him my factory 3 speed column but I got rid of the rods a few months back thinking I was done with them. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

09-13-2014, 07:05 PM	#38
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: garage sale Im interested in the seat tracks and intake manifold. Ill take the exhaust manifold too if you have it. pm sent.

09-17-2014, 01:02 AM	#39
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,067	Re: garage sale Okay, this stuff has been up for about a week. Help me move this stuff. Any reasonable offer accepted. Anything not gone in the next couple of weeks is going to the scrap metal yard. I can provide better pics or info if needed. thanks. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

09-17-2014, 06:02 PM	#40
Steaksauce Registered User Join Date: Sep 2014 Location: St Joseph, Mo Posts: 12	Re: garage sale Pm'd you on a couple things

09-24-2014, 07:31 PM	#41
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,067	Re: garage sale All parts paid for have now been shipped. Steaksauce, I sent you a pm. I'm letting this thread die at this point. I still have parts for sale that I will update and post separately now that they have been thinned out a bit. Thanks, Brett __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

12-27-2014, 07:26 PM	#42
jlampka Registered User Join Date: Sep 2013 Location: North Tonawanda, NY Posts: 236	Re: garage sale need to know the ctr to ctr hole dimensions on the fan........I have a wrong fan for my 1967 250 engine...also how much shipped to 14120 if the holes fit my water pump? Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.