factory 66 seat belt anchor locations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**argonaut** · 02-05-2015, 01:55 AM

Does anyone have pics and/or measurements of where the factory seat belt anchor points are on a 66 suburban? Wanting to add them to my 64 and I'm curious to see how the General did it. Fronts are the first priority but the rears would be cool too. Its so hard to decide to cut holes in an unmolested original floor!

65chevysub · 02-05-2015, 08:21 AM

I don't have a current pic of my front mounting for the belts but here is how I did the rear seat using the floor anchor. I will eventually get these doe the way they are supposed to be, it's just finding the time.

**VictoriaHardware** · 02-07-2015, 08:03 PM

Here are pics of the front belt anchor holes on my '66. I am not using any of the holes since I replaced the seats and they have integral seat belts. I can't help with the rears.

Left Hand Outboard - the original bolt is screwed into the hole. There is a weld nut under the floor as seen in the second pic.
LH IB - the hole was welded up, but you can see it's location
RH IB - similar to the LH IB
RH OB - this one has a weld nut also, but it's inside the crossmember. This could be difficult for you to duplicate unless you cut some access hole. The other three are easy to get to though.

**argonaut** · 02-16-2015, 01:06 AM

Oh man, that's awesome! Thank you!

02-05-2015, 01:55 AM	#1
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	factory 66 seat belt anchor locations Does anyone have pics and/or measurements of where the factory seat belt anchor points are on a 66 suburban? Wanting to add them to my 64 and I'm curious to see how the General did it. Fronts are the first priority but the rears would be cool too. Its so hard to decide to cut holes in an unmolested original floor! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! Last edited by argonaut; 02-16-2015 at 01:13 AM.

02-05-2015, 08:21 AM	#2
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,374	Re: factory 66 seat belt anchor locations I don't have a current pic of my front mounting for the belts but here is how I did the rear seat using the floor anchor. I will eventually get these doe the way they are supposed to be, it's just finding the time. Attached Images

02-07-2015, 08:03 PM	#3
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 783	Re: factory 66 seat belt anchor locations Here are pics of the front belt anchor holes on my '66. I am not using any of the holes since I replaced the seats and they have integral seat belts. I can't help with the rears. Left Hand Outboard - the original bolt is screwed into the hole. There is a weld nut under the floor as seen in the second pic. LH IB - the hole was welded up, but you can see it's location RH IB - similar to the LH IB RH OB - this one has a weld nut also, but it's inside the crossmember. This could be difficult for you to duplicate unless you cut some access hole. The other three are easy to get to though. Attached Images

02-16-2015, 01:06 AM	#4
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: factory 66 seat belt anchor locations Oh man, that's awesome! Thank you! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.