Dang horn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968_long_bed · 03-09-2015, 01:54 PM

Ok have a horn problem change everything but it continues to go off changed the horn sensor changed the horn assembly changed the wires but when i plug the horns in it keep just sounding

getting rather ticked even removed the horn assembly its still going. any advice would be greatly appreciated.

Longhorn 70 · 03-09-2015, 02:18 PM

Horn Relay?

1968_long_bed · 03-09-2015, 02:23 PM

the silver square thing with 3 prong about two inches from fuse panel it was buzzing something fierce when i turned on my lights and when it not plugged in no horn sound at all???

1968_long_bed · 03-09-2015, 02:24 PM

i said horn sensor before meant to say relay whoops

Longhorn 70 · 03-09-2015, 02:47 PM

Ah. I thought you meant button. If the wire from the column isn't connected on the relay, does the horn still sound? I think it's a small brown wire on the relay. There is a big red as well as a dark green that goes to the horns. the third wire.....brown?

1968_long_bed · 03-09-2015, 03:59 PM

nope it black was brown till i cleaned it off lol

Longhorn 70 · 03-09-2015, 04:01 PM

no longer beeps with the black (brown) wire connected?

cdowns · 03-09-2015, 05:42 PM

A short in the steering column

Longhorn 70 · 03-09-2015, 05:46 PM

that would be my guess...

**A1971Blazer** · 03-09-2015, 08:43 PM

Quote:

Originally Posted by cdowns

A short in the steering column

Most likey........the wire in the column that goes up to the horn button simply grounds the horn relay in order to energize it and blow the horn. Check to see if it's shorted to ground when you wiggle around on the steering column harness.

1968_long_bed · 03-10-2015, 01:58 PM

sorry got called into work couldn't finish it up. so ran a couple of leads to the the switch to bypass the black wire. i ( no no random horn sound) already changed out the harness that comes down the steering column. because i had no tail tight flashers (switched to led) and thanks who ever said ground the one that wasn't working. any way now when i check my switch with my light i have no power. at the horn button.

03-09-2015, 01:54 PM	#1
1968_long_bed Registered User Join Date: Feb 2015 Location: Lake Ozark Posts: 6	Dang horn Ok have a horn problem change everything but it continues to go off changed the horn sensor changed the horn assembly changed the wires but when i plug the horns in it keep just sounding getting rather ticked even removed the horn assembly its still going. any advice would be greatly appreciated.

03-09-2015, 02:18 PM	#2
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: Dang horn Horn Relay? __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9

03-09-2015, 02:23 PM	#3
1968_long_bed Registered User Join Date: Feb 2015 Location: Lake Ozark Posts: 6	Re: Dang horn the silver square thing with 3 prong about two inches from fuse panel it was buzzing something fierce when i turned on my lights and when it not plugged in no horn sound at all???

03-09-2015, 02:24 PM	#4
1968_long_bed Registered User Join Date: Feb 2015 Location: Lake Ozark Posts: 6	Re: Dang horn i said horn sensor before meant to say relay whoops

03-09-2015, 02:47 PM	#5
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: Dang horn Ah. I thought you meant button. If the wire from the column isn't connected on the relay, does the horn still sound? I think it's a small brown wire on the relay. There is a big red as well as a dark green that goes to the horns. the third wire.....brown? __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9

03-09-2015, 03:59 PM	#6
1968_long_bed Registered User Join Date: Feb 2015 Location: Lake Ozark Posts: 6	Re: Dang horn nope it black was brown till i cleaned it off lol

03-09-2015, 04:01 PM	#7
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: Dang horn no longer beeps with the black (brown) wire connected? __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9

03-09-2015, 05:42 PM	#8
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Dang horn A short in the steering column __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-09-2015, 05:46 PM	#9
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: Dang horn that would be my guess... __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9

03-10-2015, 01:58 PM	#11
1968_long_bed Registered User Join Date: Feb 2015 Location: Lake Ozark Posts: 6	Re: Dang horn sorry got called into work couldn't finish it up. so ran a couple of leads to the the switch to bypass the black wire. i ( no no random horn sound) already changed out the harness that comes down the steering column. because i had no tail tight flashers (switched to led) and thanks who ever said ground the one that wasn't working. any way now when i check my switch with my light i have no power. at the horn button.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.