AZ Parting out GMC Jimmy - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lane224 · 11-14-2015, 10:04 AM

I'll take it. PM your payment info.
Thanks

lane224 · 11-19-2015, 08:09 AM

Need your payment info.

lane224 · 11-27-2015, 10:06 AM

Payment sent.
Thank you.

Original72 · 12-05-2015, 02:35 AM

What condition is the dash in?

**1774btcrew** · 12-05-2015, 03:21 AM

The pad isn't any good

1985-GMC · 12-07-2015, 12:46 AM

Quote:

Originally Posted by 1774btcrew

Nice! I had a mint 77 Non A/C one. I sure wish it was for an air truck!

Did you sell that one? This guy was looking for one, don't know if he ever got one.

http://67-72chevytrucks.com/vboard/s...d.php?t=544753

Liddy71 · 12-07-2015, 07:54 AM

condition and price on the 2 chrome pieces that bolts the top on shipping to 25570 is the radio hole good

**1774btcrew** · 12-07-2015, 11:51 PM

Radio hole is uncut. I won't be able to look at the condition of the hold down pieces until Friday. I came out to CA for the Pomona Swapmeet and am staying a few extra days.

**1774btcrew** · 12-08-2015, 12:03 AM

Quote:

Originally Posted by 1985-GMC

Did you sell that one? This guy was looking for one, don't know if he ever got one.

http://67-72chevytrucks.com/vboard/s...d.php?t=544753

I didn't sell it but haven't decided what to do with it. It is so nice I hate to let it go.

1985-GMC · 12-08-2015, 01:30 AM

Well he's been looking for one since 2012 so I'm sure he'd appreciate it haha. He might even have a nice A/C version to trade you.

**Willowrun** · 12-08-2015, 10:03 AM

Jeff,
I could use a couple of sheet metal cuts off of the Jimmy. Need roof section above rear part of drivers door, and also pass side rear quarter behind tire up to upper trim if not rusty/dented. Send me a PM when your back in town and I'll get you some pics of what I need. No rush....it's for a project that's a couple years down the road.

**1774btcrew** · 12-09-2015, 01:14 PM

I will let you know when I am back in town

68Timber · 12-09-2015, 02:06 PM

Did the rear interior panels sell?

**1774btcrew** · 12-10-2015, 12:33 AM

Yes they did sell

**1774btcrew** · 12-15-2015, 05:29 PM

Ttt

**1774btcrew** · 12-15-2015, 05:31 PM

Quote:

Originally Posted by Liddy71

condition and price on the 2 chrome pieces that bolts the top on shipping to 25570 is the radio hole good

I was able to make it over to where the Jimmy was last night The hold down pieces for the top look nice would want $40 for the pair not including shipping.

Liddy71 · 12-15-2015, 07:57 PM

shipping to 25570

**1774btcrew** · 12-15-2015, 08:54 PM

I haven't removed them. If you get me a measurement on the length of your shell where these mount, I can get you a pretty close estimate. It is a 20 minute drive for me each direction so it would help me out.

Liddy71 · 12-15-2015, 09:11 PM

ok will do

**Willowrun** · 12-15-2015, 11:38 PM

Quote:

Originally Posted by Willowrun

Jeff,
I could use a couple of sheet metal cuts off of the Jimmy. Need roof section above rear part of drivers door, and also pass side rear quarter behind tire up to upper trim if not rusty/dented. Send me a PM when your back in town and I'll get you some pics of what I need. No rush....it's for a project that's a couple years down the road.

How is the pass rear quarter from center of tire back? I'll try to take a pics of roof section I need in the next couple days.

**1774btcrew** · 12-16-2015, 12:15 AM

Passenger quarter has rust behind the wheel

11-14-2015, 10:04 AM	#26
lane224 Registered User Join Date: Aug 2014 Location: New York Posts: 597	Re: Parting out GMC Jimmy I'll take it. PM your payment info. Thanks

11-19-2015, 08:09 AM	#27
lane224 Registered User Join Date: Aug 2014 Location: New York Posts: 597	Re: Parting out GMC Jimmy Need your payment info.

11-27-2015, 10:06 AM	#28
lane224 Registered User Join Date: Aug 2014 Location: New York Posts: 597	Re: Parting out GMC Jimmy Payment sent. Thank you.

12-05-2015, 02:35 AM	#29
Original72 Registered User Join Date: Nov 2010 Location: Hou TX Posts: 47	Re: Parting out GMC Jimmy What condition is the dash in?

12-05-2015, 03:21 AM	#30
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out GMC Jimmy The pad isn't any good __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-07-2015, 07:54 AM	#32
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting out GMC Jimmy condition and price on the 2 chrome pieces that bolts the top on shipping to 25570 is the radio hole good

12-07-2015, 11:51 PM	#33
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out GMC Jimmy Radio hole is uncut. I won't be able to look at the condition of the hold down pieces until Friday. I came out to CA for the Pomona Swapmeet and am staying a few extra days. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-08-2015, 01:30 AM	#35
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Parting out GMC Jimmy Well he's been looking for one since 2012 so I'm sure he'd appreciate it haha. He might even have a nice A/C version to trade you. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

12-08-2015, 10:03 AM	#36
Willowrun Senior Member Join Date: Mar 2013 Location: Ann Arbor, MI Posts: 1,023	Re: Parting out GMC Jimmy Jeff, I could use a couple of sheet metal cuts off of the Jimmy. Need roof section above rear part of drivers door, and also pass side rear quarter behind tire up to upper trim if not rusty/dented. Send me a PM when your back in town and I'll get you some pics of what I need. No rush....it's for a project that's a couple years down the road.

12-09-2015, 01:14 PM	#37
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out GMC Jimmy I will let you know when I am back in town __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-09-2015, 02:06 PM	#38
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Parting out GMC Jimmy Did the rear interior panels sell? __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

12-10-2015, 12:33 AM	#39
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out GMC Jimmy Yes they did sell __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-15-2015, 05:29 PM	#40
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out GMC Jimmy Ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-15-2015, 07:57 PM	#42
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting out GMC Jimmy shipping to 25570

12-15-2015, 08:54 PM	#43
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out GMC Jimmy I haven't removed them. If you get me a measurement on the length of your shell where these mount, I can get you a pretty close estimate. It is a 20 minute drive for me each direction so it would help me out. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.



Register or Log In To remove these advertisements.

12-15-2015, 09:11 PM	#44
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting out GMC Jimmy ok will do

12-16-2015, 12:15 AM	#46
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out GMC Jimmy Passenger quarter has rust behind the wheel __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

Register or Log In To remove these advertisements.