|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-22-2016, 11:20 PM
|
#1 |
|
Registered User
Join Date: Apr 2015
Location: Port McNeill, B.C.
Posts: 464
|
Re: 1963 GMC C30 panel truck
Started the blending. Will need to spend some more time on getting it nice and smooth.
|
|
|
|
02-23-2016, 12:00 AM
|
#2 |
|
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: 1963 GMC C30 panel truck
Nice, what are you using to take your welds down? I find sandpaper flap disc's such as these work the best.
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
|
|
|
02-23-2016, 11:22 AM
|
#3 |
|
Registered User
Join Date: Apr 2015
Location: Port McNeill, B.C.
Posts: 464
|
Re: 1963 GMC C30 panel truck
...
Last edited by AJCK87; 02-23-2016 at 11:27 AM. |
|
|
|
|
02-23-2016, 11:26 AM
|
#4 | |
|
Registered User
Join Date: Apr 2015
Location: Port McNeill, B.C.
Posts: 464
|
Re: 1963 GMC C30 panel truck
Quote:
I have used them, they are awesome. I found that I was able to get to aggressive with them and would end up taking to much off. So I have been using a regular grinding disk, a file and in this case was trying out some sand paper. Makes me be a bit more cautious I guess |
|
|
|
|
|
03-04-2016, 12:20 AM
|
#5 |
|
Registered User
Join Date: Apr 2015
Location: Port McNeill, B.C.
Posts: 464
|
Re: 1963 GMC C30 panel truck
Down island for the weekend, tackling the bumpers. The front is mounted now. The back is all ready to go, just letting the paint dry. Pictures to come
|
|
|
|
|
03-04-2016, 01:46 AM
|
#6 |
|
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: 1963 GMC C30 panel truck
It's lookin good
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
|
|
|
03-06-2016, 11:16 PM
|
#7 | |
|
Registered User
Join Date: Apr 2015
Location: Port McNeill, B.C.
Posts: 464
|
Re: 1963 GMC C30 panel truck
Quote:
More on the panel. Rear bumper is all bolted up. Decided to start drilling out all the body mount carriage bolt and well... Ended up drilling out all the bolts for the strapping as well. The strapping was crusty, soo, I got them all fire wheeled and painted with enamel. Will be looking into getting some new plywood to lay down, might be tough to find some in 10 1/2' lengths hahaha Last edited by AJCK87; 03-06-2016 at 11:24 PM. |
|
|
|
|
|
03-10-2016, 11:34 PM
|
#8 |
|
Registered User
Join Date: Apr 2015
Location: Port McNeill, B.C.
Posts: 464
|
Re: 1963 GMC C30 panel truck
Parts come in!!!!
O yeah, had to put on the lenses and they are looking sharp. Also got , the front windshield seal, cowl to hood seal, front bumper brackets, front floor pan supports, front fender seals and some more barn door hinge seals. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
