WI 64 65 and 66 Chevy 3/4 ton hubcaps for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**60-66** · 12-06-2013, 03:37 PM

I have two sets of hubcaps for sale. First set here is 1964 and 1965 . These were 3/4 tons with the ring in the back. I removed the rings and used them in chrome caps on my K20. These are just the outer shells, no rings. Several were NOS before I took them apart. Just put your rings back in and roll the edge back on, you can use the smaller 1/2 ton clip style ring in these also. $150.00 Shipped.

**60-66** · 12-06-2013, 03:40 PM

Next set are these 1966 3/4 ton caps. Used . Bottom right cap has a dent I point out and these have surface rust as shown but are restorable. $150.00 shipped.

**60-66** · 01-02-2014, 06:53 PM

bump

**60-66** · 01-13-2015, 10:37 AM

ttt

**pimpston65** · 01-13-2015, 01:02 PM

Quote:

Originally Posted by 60-66

ttt

which set will fit on my 66 with 17.5 with clips. you know im bad at finding the right ones...

**60-66** · 01-13-2015, 02:10 PM

Neither set here unless you want to swap out the rings. First set of pictures is 64 65 and the rustier set is 1966 3/4 ton. Heres the cap your looking for http://www.ebay.com/itm/191480551086...%3AMEBIDX%3AIT
Notice the difference in the ring size on the back, its smaller Di for half ton and its a 1966 cap.

**dtkarst** · 01-13-2015, 02:29 PM

WIll they fit 16'' rims? My fronts are 16 but the rears are 16.5.. I imagine ill have to swap my rears for 16 inch wheels? Im interested int eh second set.

**60-66** · 01-13-2015, 02:47 PM

Yes, they fit 16, 16.5,17 etc as long as its an 8 lug rim WITH the clips to hold it on like this one .

**pimpston65** · 01-13-2015, 04:00 PM

so i bought it now i need 4 more, thks if come across another set let me know!!!

**60-66** · 01-13-2015, 04:57 PM

Yeah, that was super cheap, almost bought it myself to stick on the shelf. Glad you got it !

**dtkarst** · 01-13-2015, 05:18 PM

Well I don't have the clips...which is a bummer.

**60-66** · 01-14-2015, 10:28 AM

Do you have pictures of your wheels ? You may need to use the later early 70s nub style caps

**pimpston65** · 01-14-2015, 01:46 PM

Quote:

Originally Posted by 60-66

bump

sorry to thread jump, but i was cleaning my house and found this. its NOS and i will send it your way free, just send me your address!!!

**60-66** · 03-17-2016, 09:29 AM

ttt

12-06-2013, 03:37 PM	#1
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	64 65 and 66 Chevy 3/4 ton hubcaps for sale I have two sets of hubcaps for sale. First set here is 1964 and 1965 . These were 3/4 tons with the ring in the back. I removed the rings and used them in chrome caps on my K20. These are just the outer shells, no rings. Several were NOS before I took them apart. Just put your rings back in and roll the edge back on, you can use the smaller 1/2 ton clip style ring in these also. $150.00 Shipped. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

12-06-2013, 03:40 PM	#2
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale Next set are these 1966 3/4 ton caps. Used . Bottom right cap has a dent I point out and these have surface rust as shown but are restorable. $150.00 shipped. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-02-2014, 06:53 PM	#3
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale bump __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-13-2015, 10:37 AM	#4
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale ttt __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-13-2015, 02:10 PM	#6
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale Neither set here unless you want to swap out the rings. First set of pictures is 64 65 and the rustier set is 1966 3/4 ton. Heres the cap your looking for http://www.ebay.com/itm/191480551086...%3AMEBIDX%3AIT Notice the difference in the ring size on the back, its smaller Di for half ton and its a 1966 cap. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-13-2015, 02:29 PM	#7
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale WIll they fit 16'' rims? My fronts are 16 but the rears are 16.5.. I imagine ill have to swap my rears for 16 inch wheels? Im interested int eh second set.

01-13-2015, 02:47 PM	#8
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale Yes, they fit 16, 16.5,17 etc as long as its an 8 lug rim WITH the clips to hold it on like this one . __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-13-2015, 04:00 PM	#9
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,191	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale so i bought it now i need 4 more, thks if come across another set let me know!!! Attached Images

01-13-2015, 04:57 PM	#10
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale Yeah, that was super cheap, almost bought it myself to stick on the shelf. Glad you got it ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-13-2015, 05:18 PM	#11
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale Well I don't have the clips...which is a bummer.

01-14-2015, 10:28 AM	#12
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale Do you have pictures of your wheels ? You may need to use the later early 70s nub style caps __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

03-17-2016, 09:29 AM	#14
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 64 65 and 66 Chevy 3/4 ton hubcaps for sale ttt __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.