|
04-25-2016, 11:53 PM
|
#1 |
|
Registered User
Join Date: Dec 2013
Location: Gold Canyon, AZ
Posts: 36
|
Unisteer R&P
Considering installing the unisteer bolt in rack in my 72 small block. Hoping for some feedback from those of you who may have some experience with this. Thanks in advance
|
|
|
|
04-26-2016, 10:15 AM
|
#2 |
|
Registered User
Join Date: Sep 2015
Location: fergus falls mn
Posts: 116
|
Re: Unisteer R&P
i wonder if they will sell individual pieces? i dont need a pump and pulley
|
|
|
|
|
04-26-2016, 12:02 PM
|
#3 | |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,134
|
Re: Unisteer R&P
Quote:
|
|
|
|
|
|
04-30-2016, 11:18 PM
|
#4 |
|
Registered User
Join Date: Apr 2005
Location: Austin, Texas
Posts: 294
|
Re: Unisteer R&P
Call and ask for Todd. I think his extension is 244
Mine will be here next week. Just the rack etc not the pump, hoses etc
__________________
My mother is a recent cancer survivor and this truck build is for her |
|
|
|
|
05-11-2016, 12:58 PM
|
#5 |
|
Registered User
Join Date: Dec 2013
Location: Gold Canyon, AZ
Posts: 36
|
Re: Unisteer R&P
Still hoping to hear from you guys out there with this rack. Thanks
|
|
|
|
|
05-11-2016, 05:23 PM
|
#6 |
|
Registered User
Join Date: Aug 2010
Location: AZ
Posts: 3,069
|
Re: Unisteer R&P
They do sell it without pump and pump bracket. Be glad to help you in getting it. We ordered it this way for my buddy's truck running an LS.
Ask for Travis 480-420-8175 Posted via Mobile Device |
|
|
|
|
05-12-2016, 01:44 PM
|
#7 |
|
Registered User
Join Date: May 2016
Location: Horsham, PA
Posts: 2
|
Re: Unisteer R&P
I just put one in my 71 GMC, no motor yet. I got the kit with the pump. Came with all the hosed needed and the fluid remote reservoir. Nice R&P bolted right in so far very happy with it. instructions dealing with the steering support bracket have me a little stumped. They may have changed the bracket but not the pic in the booklet.
__________________
1971 GMC - Hotchkis TVS - Baer 6p/4p setup - 383 - T56 6sp - 4.56 !!! 2004 Monte Carlo SS 2015 GMC Sierra 1500 |
|
|
|
|
07-07-2016, 09:44 PM
|
#8 |
|
Active Member
Join Date: Jan 2005
Location: Spokane WA
Posts: 166
|
Re: Unisteer R&P
Got the kit from Summit. Had a problem with a mismarked container and got a Camaro kit for my '69 C10. Didn't fit and the turn around took 2 months. That's my only complaint. Had to replace one of the stainless universals as something didn't match my particular set-up. Follow the instructions and it goes right in. Quality is exceptional. Looks and works great!
|
|
|
|
|
07-11-2016, 01:01 AM
|
#9 |
|
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
Re: Unisteer R&P
Has anyone installed the kit on a truck with an air ride suspension?
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES" 
|
|
|
|
|
07-12-2016, 07:58 PM
|
#10 |
|
Registered User
Join Date: Dec 2009
Location: Kirkland, WA
Posts: 1,302
|
Re: Unisteer R&P
Or with a pancaked crossmember?
__________________
1968 LWB C20 / AC / Wood Bed |
|
|
|
|
07-12-2016, 09:28 PM
|
#11 |
|
Active Member
Join Date: Jan 2005
Location: Spokane WA
Posts: 166
|
Re: Unisteer R&P
I'm on bags. No problems. The turn radius is wider than stock so I cut the steering stops off cuz ya never get close to em. Actually has very little toe-in when pancaked.
|
|
|
|
|
07-12-2016, 11:11 PM
|
#12 | |
|
Registered User
Join Date: Dec 2009
Location: Kirkland, WA
Posts: 1,302
|
Re: Unisteer R&P
Quote:
__________________
1968 LWB C20 / AC / Wood Bed |
|
|
|
|
|
09-14-2016, 11:56 AM
|
#13 |
|
Registered User
Join Date: Dec 2013
Location: Gold Canyon, AZ
Posts: 36
|
Re: Unisteer R&P
Anybody have anything new to add?? Thanks
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
