Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-27-2017, 10:19 AM | #1 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,921
|
Re: more brake line issues
Is that for a front disc conversion? Because that hard to soft union is at the rear of the crossmember like on a drum brake setup. The hard to soft union on a 71-72 front disc rig has the union on the front of the crossmember.
When I swapped all my 1972 stuff to a 1969 frame I already had the brake lines (kit from inline tube) already ran for my stock disc brake setup on a 1972 frame. So I had to cut the soft brake line tabs off of the front of my 1972 crossmember and weld them onto the 1969 crossmember. Not sure if that is your issue or not. But here is a post from my build thread about it: http://www.67-72chevytrucks.com/vboa...&postcount=157 Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Last edited by GASoline71; 04-27-2017 at 11:50 AM. |
||
Bookmarks |
Tags |
brake lines, brothers, inlinetube, prebent |
|
|