|
03-06-2018, 03:22 PM
|
#1 |
|
Registered User
Join Date: Jul 2017
Location: Osceola iowa
Posts: 7
|
67 k10 frame
So i knew my 1967 K10 4x4 had some issues, but when I pulled the box this is what I found. I need some imput from others who have been down this road before.
The frame is cracked and rotted on both sides where the front leaf spring hangers are. Both front hangers are junk. I haven't taken the rear mounts off yet, but they don't look to swell. The rear shackles are in pretty poor condition. The rear crossmember is junk. I can plate the frame myself and make a crossmember. Or do I do and frame swap, can I buy frame repair kits? I think I'll have to do a retro fit on the leaf hangers but 67-68 hangers just don't exist. Thanks Last edited by Dueceswild67; 03-06-2018 at 03:42 PM. |
|
|
|
03-06-2018, 03:38 PM
|
#2 |
|
Registered User
Join Date: Jul 2017
Location: Osceola iowa
Posts: 7
|
Re: 67 k10 frame
Here are the pics
|
|
|
|
|
03-06-2018, 03:41 PM
|
#3 |
|
Registered User
Join Date: Jul 2017
Location: Osceola iowa
Posts: 7
|
Re: 67 k10 frame
More
|
|
|
|
|
03-06-2018, 05:31 PM
|
#4 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,359
|
Re: 67 k10 frame
-
Check with Art's Classic Truck Parts in Indianola, IA. He may have some good used parts or a complete frame. Nice guy and knows his trucks...... Tell him Leon told you to call. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
03-06-2018, 05:50 PM
|
#5 |
|
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,836
|
Re: 67 k10 frame
what if you were to swap to a 71 72 frame? then you could have the wider rear axle (if the 4x4 rear ends are like the 2wd) and have disk in the front.
__________________
1967custom |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
