|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-24-2018, 01:33 PM
|
#1 |
|
Registered User
Join Date: Dec 2015
Location: Napa,ca
Posts: 23
|
Bigger ball joints ?????
My lower ball joint on my 63 fits a little loose.Dowa Anybody know who might sell a oversized one? I called Moog and they have nothing. Anybody else having this issue ?
Posted via Mobile Device |
|
|
|
04-24-2018, 11:37 PM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Bigger ball joints ?????
Is it loose in the spindle or in the lower control arm? I think you will just have to replace the part that is worn.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
04-25-2018, 06:33 AM
|
#3 |
|
Registered User
Join Date: Jun 2007
Location: Charlotte, NC
Posts: 516
|
Re: Bigger ball joints ?????
if the ball joint socket is not worn beyond repair, you might be able to re-ream the taper so the joint just sits slightly lower, but solidly, in the tapered socket.
This would only work for minor damage to the taper. FWIW
__________________
past trucks: 1980 C-10 Silverado SWB 1961 C-10 custom cab LWB 1966 C-10 custom cab LWB |
|
|
|
|
04-25-2018, 07:34 AM
|
#4 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,707
|
Re: Bigger ball joints ?????
On my old 70, I put a few tack welds in the a-arm area, then smoothed them out and it basically rebuilt the taper area and the ball joint fit in the socket hole tightly again.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
04-27-2018, 10:08 PM
|
#5 |
|
Registered User
Join Date: Nov 2010
Location: Indiana, PA
Posts: 220
|
Re: Bigger ball joints ?????
I had off-road truck I had to gusset the socket on the upper A arm and tack weld the ball-joint into. With out doing that I kept blowing the joint out on landings.
|
|
|
|
|
04-27-2018, 10:18 PM
|
#6 | |
|
Registered User
Join Date: Oct 2016
Location: san bernardino ca
Posts: 1,611
|
Re: Bigger ball joints ?????
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
