GA ISO/WTB two items needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WAYNE G. · 10-24-2018, 10:11 PM

I'm hoping that someone would have the stainless steel windshield trim for 1969/70 blazer with the 5/8" leg, as well as the rear hatch trim that attaches to the top of tailgate for rear hatch to seal too. Looking for nice or better. Thanks Wayne G.

dirish · 10-25-2018, 03:17 AM

Wayne, I got a reproduction rear hatch/gate piece from Carolina classic trucks. 60-80$ I think. Very nice copy. Might try them, it's been a few years.

WAYNE G. · 10-25-2018, 08:15 AM

Quote:

Originally Posted by dirish

Wayne, I got a reproduction rear hatch/gate piece from Carolina classic trucks. 60-80$ I think. Very nice copy. Might try them, it's been a few years.

Dirish, thanks for the info on tailgate trim. Wayne

**1rippen6** · 10-25-2018, 08:55 AM

Wayne the trucks are the same you may want to do a WTB ad over there since there were a lot more trucks produced.

flashed · 10-25-2018, 09:40 PM

I have a truck cab with the stainless trim .

WAYNE G. · 10-25-2018, 10:15 PM

Quote:

Originally Posted by flashed

I have a truck cab with the stainless trim .

Flashed, can you pm me with pictures and cost shipped to me? Thanks for a response. Wayne

flashed · 10-26-2018, 06:24 PM

I will have to get some pics , I was hoping you would come up and remove them as I have never done that and would hate to ruin them .

**1rippen6** · 10-26-2018, 07:40 PM

Use a razor knife and cut the rubber. I hope your not trying to save the rubber, I don't think they will come out that easy.

**IronCanine** · 10-26-2018, 08:54 PM

Free to a good home. Not perfect. Both styles. Take your pick. Yellow is the best of the bunch. Can pick it up on your way to Canton

flashed · 10-26-2018, 09:01 PM

I can cut the rubber , will have to see what they look like first but think they are nice .

WAYNE G. · 10-26-2018, 09:15 PM

Quote:

Originally Posted by flashed

I can cut the rubber , will have to see what they look like first but think they are nice .

Flashed, i will send you my original one to you as well as a new Precision Gasket Co. Seal, your choice. If you can ups it will save a lot of time. Let me know, thanks Wayne

Ps. The reason my gasket came out in one piece, it did not have the trim when I purchased the truck. Pushed on one corner and worked it around ...

WAYNE G. · 10-26-2018, 09:16 PM

Quote:

Originally Posted by WAYNE G.

Flashed, i will send you my original one to you as well as a new Precision Gasket Co. Seal, your choice. If you can ups it will save a lot of time. Let me know, thanks Wayne

Ps. The reason my gasket came out in one piece, it did not have the trim when I purchased the truck. Pushed on one corner and worked it around ...

Plus, willing to pay you for the trim and shipping....

WAYNE G. · 10-26-2018, 09:18 PM

Quote:

Originally Posted by IronCanine

Free to a good home. Not perfect. Both styles. Take your pick. Yellow is the best of the bunch. Can pick it up on your way to Canton

IronCanine, fortunately you are up the road from me , are you available tomorrow? Thanks Wayne

flashed · 10-26-2018, 09:23 PM

I will be cutting from a parts cab . About the last good parts left .

WAYNE G. · 10-26-2018, 09:30 PM

Quote:

Originally Posted by flashed

I will be cutting from a parts cab . About the last good parts left .

Let me know and Thank you for your help. Wayne

WAYNE G. · 10-26-2018, 09:30 PM

Quote:

Originally Posted by flashed

I will be cutting from a parts cab . About the last good parts left .

Its a 69/70 ?

**IronCanine** · 10-26-2018, 09:44 PM

Quote:

Originally Posted by WAYNE G.

IronCanine, fortunately you are up the road from me , are you available tomorrow? Thanks Wayne

Should be available. Gonna be working on my brother's 69. I saw you were in Augusta, that's why I offered them up. PM me if you want my cell. I'm only an hour away from flashed.

WAYNE G. · 10-26-2018, 09:56 PM

Quote:

Originally Posted by flashed

I will be cutting from a parts cab . About the last good parts left .

Flash, did not know that you were 1 hour away from Athens, are you available tomorrow as well? Wayne

WAYNE G. · 10-26-2018, 10:03 PM

Quote:

Originally Posted by IronCanine

Should be available. Gonna be working on my brother's 69. I saw you were in Augusta, that's why I offered them up. PM me if you want my cell. I'm only an hour away from flashed.

IronCanine, I sent you a PM. Thanks Wayne

flashed · 10-26-2018, 10:22 PM

My cab is a 72 . Not sure about tomorrow .

WAYNE G. · 10-26-2018, 10:34 PM

Quote:

Originally Posted by flashed

My cab is a 72 . Not sure about tomorrow .

Np, i will pm you my phone number in case something changes. Wayne

**IronCanine** · 10-26-2018, 10:53 PM

Quote:

Originally Posted by WAYNE G.

IronCanine, I sent you a PM. Thanks Wayne

Replied.

10-24-2018, 10:11 PM	#1
WAYNE G. Registered User Join Date: Mar 2007 Location: augusta, ga. Posts: 157	ISO/WTB two items needed I'm hoping that someone would have the stainless steel windshield trim for 1969/70 blazer with the 5/8" leg, as well as the rear hatch trim that attaches to the top of tailgate for rear hatch to seal too. Looking for nice or better. Thanks Wayne G.

10-25-2018, 03:17 AM	#2
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: ISO/WTB two items needed Wayne, I got a reproduction rear hatch/gate piece from Carolina classic trucks. 60-80$ I think. Very nice copy. Might try them, it's been a few years.

10-25-2018, 08:55 AM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,715	Re: ISO/WTB two items needed Wayne the trucks are the same you may want to do a WTB ad over there since there were a lot more trucks produced.

10-25-2018, 09:40 PM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: ISO/WTB two items needed I have a truck cab with the stainless trim .

10-26-2018, 06:24 PM	#7
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: ISO/WTB two items needed I will have to get some pics , I was hoping you would come up and remove them as I have never done that and would hate to ruin them .

10-26-2018, 07:40 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,715	Re: ISO/WTB two items needed Use a razor knife and cut the rubber. I hope your not trying to save the rubber, I don't think they will come out that easy.

10-26-2018, 08:54 PM	#9
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,542	Re: ISO/WTB two items needed Free to a good home. Not perfect. Both styles. Take your pick. Yellow is the best of the bunch. Can pick it up on your way to Canton Attached Images __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

10-26-2018, 09:01 PM	#10
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: ISO/WTB two items needed I can cut the rubber , will have to see what they look like first but think they are nice .

10-26-2018, 09:23 PM	#14
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: ISO/WTB two items needed I will be cutting from a parts cab . About the last good parts left .

10-26-2018, 10:22 PM	#20
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: ISO/WTB two items needed My cab is a 72 . Not sure about tomorrow .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.