"Albert" -- 1949 AD, S10 Chassis

[52ratrod]

Originally Posted by HUSSEY

I installed new Blazer flex lines from the frame to the calipers. My hard lines were pretty crusty so I ran new hard lines from the master cylinder to the each wheel.

Did you bend your own brake lines and make your connections or did you use a brake line kit?

[HUSSEY]

Originally Posted by 52ratrod

Did you bend your own brake lines and make your connections or did you use a brake line kit?

I bent and flared my own. You can pick up an line bender and a flaring kit without investing too much.

[52ratrod]

Originally Posted by HUSSEY

I bent and flared my own. You can pick up an line bender and a flaring kit without investing too much.

So if I bought S10 flex hose and brake line kit would work? I'm just looking for as easy as possible. Thanks for the information Hussey. I'm following your build as close as possible.

[HUSSEY]

Originally Posted by 52ratrod

So if I bought S10 flex hose and brake line kit would work? I'm just looking for as easy as possible. Thanks for the information Hussey. I'm following your build as close as possible.

I can only speak for what I did which was Blazer rubber lines and Blazer brackets and bet to fit new lines. Joedoe gave a good description above, I'd follow his if you want to do something different.