The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-23-2019, 02:21 PM   #26
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Quote:
Originally Posted by SCOTI View Post
I looked @ your build thread on LS1.com. Kind of figured you were going bigger than the L83 since you already had a 6.0.
I highly recommend swapping out your rag-joint set-up for a Cherokee XJ shaft swap. I chimed in on pg.2: http://67-72chevytrucks.com/vboard/s...=505196&page=3
The L83 actually makes more power than a stock 6.0. I’m looking for a modern driver so 400hp is plenty. No rag joint on this truck, I made a steering shaft I’ll post pics on ls1tech
Posted via Mobile Device
lukeembry is offline   Reply With Quote
Old 08-23-2019, 04:46 PM   #27
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
Re: 85 C10 LT/6L80 Frame off build

Quote:
Originally Posted by lukeembry View Post
The L83 actually makes more power than a stock 6.0. I’m looking for a modern driver so 400hp is plenty. No rag joint on this truck, I made a steering shaft I’ll post pics on ls1tech
Posted via Mobile Device
Gotcha. The pics I saw over there it had what looked like a fresh rag-joint in place on that new Lee box. Seems you're farther ahead on the build than that pic.
Anyhoo…. I figured I would say something since you spent the money for a better box
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 08-23-2019, 06:21 PM   #28
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Quote:
Originally Posted by SCOTI View Post
Gotcha. The pics I saw over there it had what looked like a fresh rag-joint in place on that new Lee box. Seems you're farther ahead on the build than that pic.
Anyhoo…. I figured I would say something since you spent the money for a better box
Yea I went back and forth on what I wanted to do. Finally decided on building a shaft. I’m behind posting pics and updates, I’ll add some updates this weekend. Keep in touch
Posted via Mobile Device
lukeembry is offline   Reply With Quote
Old 08-26-2019, 01:06 PM   #29
Jalaska907
Registered User
 
Join Date: Aug 2019
Location: Kenai, Alaska
Posts: 2
Re: 85 C10 LT/6L80 Frame off build

Great Build! Im trying to get motivate on my 86 right now. Im currently working on my mopar. Im a huge fan of Tamco products, been using them for 5/6 years now. My challenger is ground up Tamco, and has been painted for two years now. Still looks like the day it was shot.

Like many have said before, killer build, and Im looking forward to watching it come together.
Jalaska907 is offline   Reply With Quote
Old 08-26-2019, 07:51 PM   #30
nekkidhillbilly
Account Suspended
 
Join Date: Apr 2009
Location: hazard, ky
Posts: 1,674
Re: 85 C10 LT/6L80 Frame off build

I feel like im watching hgtv when they bust up perfectly good cabinets with a sledge hammer. just messing with ya.
nekkidhillbilly is offline   Reply With Quote
Old 08-27-2019, 12:00 AM   #31
87chevy.com
BMW & ASE Master Certified
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
Re: 85 C10 LT/6L80 Frame off build

I've done a few l83 swaps and drive my 87 gen 5 swap a few times week and daum fun. If you dont have a high hump trans tunnel, you will need one.. the 6l80 is not going to fit a low hump tunnel. See my build thread in the ls swap sectupn
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote
Old 08-27-2019, 07:23 PM   #32
rickit
Registered User
 
rickit's Avatar
 
Join Date: Aug 2017
Location: kentucky
Posts: 161
Re: 85 C10 LT/6L80 Frame off build

looking good there neighbor!
rickit is offline   Reply With Quote
Old 08-28-2019, 10:15 AM   #33
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Quote:
Originally Posted by 87chevy.com View Post
I've done a few l83 swaps and drive my 87 gen 5 swap a few times week and daum fun. If you dont have a high hump trans tunnel, you will need one.. the 6l80 is not going to fit a low hump tunnel. See my build thread in the ls swap sectupn
I raised the tunnel some to clear
lukeembry is offline   Reply With Quote
Old 08-28-2019, 10:15 AM   #34
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Quote:
Originally Posted by Jalaska907 View Post
Great Build! Im trying to get motivate on my 86 right now. Im currently working on my mopar. Im a huge fan of Tamco products, been using them for 5/6 years now. My challenger is ground up Tamco, and has been painted for two years now. Still looks like the day it was shot.

Like many have said before, killer build, and Im looking forward to watching it come together.
Tammy and the Tamco group are awesome people, I really like their products
lukeembry is offline   Reply With Quote
Old 11-19-2019, 11:35 AM   #35
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Here's a few pics of the build, going to try to find time to give updates every couple days. Holley LT mid-mount accessory drive looks right at home. using a 87 R10 hanger I added a Walbro 255 pump along with a Holley Hydramat. I'll be using dual tanks that aren't baffled from Holley, they come silver but I went ahead and painted them again and used a flat clear to finish them off.
Attached Images
     

Last edited by lukeembry; 11-19-2019 at 11:52 AM.
lukeembry is offline   Reply With Quote
Old 11-19-2019, 11:37 AM   #36
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Engine bay looking more complete, inside of bed panels stripped down from having bedliner spray for years and last is some of the hardware back from zinc plating.
Attached Images
   

Last edited by lukeembry; 11-19-2019 at 11:48 AM.
lukeembry is offline   Reply With Quote
Old 11-19-2019, 11:56 AM   #37
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
Re: 85 C10 LT/6L80 Frame off build

I like the color more & more w/each view. Coming together nicely!
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 11-21-2019, 11:19 AM   #38
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Master Power Brakes installed, very nice brake kit and highly recommend, designed to use CPP spindle but I changed to the Wilwood spindle for wheel fitment issues. I'll also be using the Baer remaster with custom built stainless lines.
Attached Images
     
lukeembry is offline   Reply With Quote
Old 11-21-2019, 11:23 AM   #39
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Budnik wheels are ready for tires, I'll be running 20x10.5 and 20x8.5 with Michelin tires. I really like the brushed centers with polished lips.
Attached Images
    
lukeembry is offline   Reply With Quote
Old 11-21-2019, 11:33 AM   #40
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,955
Re: 85 C10 LT/6L80 Frame off build

Nice!
TKCR is online now   Reply With Quote
Old 11-21-2019, 12:11 PM   #41
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
Re: 85 C10 LT/6L80 Frame off build

Quote:
Originally Posted by lukeembry View Post
Master Power Brakes installed, very nice brake kit and highly recommend, designed to use CPP spindle but I changed to the Wilwood spindle for wheel fitment issues. I'll also be using the Baer remaster with custom built stainless lines.
Nice. I would only make three small changes......
Attached Images
   
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 11-21-2019, 02:21 PM   #42
Shifty One
Registered User
 
Shifty One's Avatar
 
Join Date: Dec 2014
Location: Tucson, AZ
Posts: 726
Re: 85 C10 LT/6L80 Frame off build

Gorgeous!
Shifty One is offline   Reply With Quote
Old 11-21-2019, 03:07 PM   #43
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

new bed floor, reworked OE wheel tubs and new front panel. it was a tough choice to finish the inside of the bed out nice vs bedliner. I really hate that I can't put anything back there without scratches or damage.
Attached Images
    
lukeembry is offline   Reply With Quote
Old 11-21-2019, 03:53 PM   #44
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
Re: 85 C10 LT/6L80 Frame off build

Quote:
Originally Posted by lukeembry View Post
new bed floor, reworked OE wheel tubs and new front panel. it was a tough choice to finish the inside of the bed out nice vs bedliner. I really hate that I can't put anything back there without scratches or damage.
Standard rubber bed matt when needed should help w/that.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 11-21-2019, 04:01 PM   #45
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Quote:
Originally Posted by SCOTI View Post
Standard rubber bed matt when needed should help w/that.
id like one but they quit making short bed matts years ago, I guess I could pick up a long bed mat and cut it to fit.
lukeembry is offline   Reply With Quote
Old 11-21-2019, 04:04 PM   #46
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
Re: 85 C10 LT/6L80 Frame off build

Quote:
Originally Posted by lukeembry View Post
id like one but they quit making short bed matts years ago, I guess I could pick up a long bed mat and cut it to fit.
Exactly. It's not like it would be there full time but sure is a nice layer of protection if/when needed.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 11-21-2019, 06:03 PM   #47
focusedontheprize
Registered User
 
focusedontheprize's Avatar
 
Join Date: Feb 2012
Location: CA
Posts: 846
Re: 85 C10 LT/6L80 Frame off build

Progress looks great!
focusedontheprize is offline   Reply With Quote
Old 11-21-2019, 09:51 PM   #48
MHarvey
Registered User
 
Join Date: Mar 2013
Location: Bowling Green, Ky
Posts: 14
Re: 85 C10 LT/6L80 Frame off build

Hey Luke, would you want to sell your old bed floor? I’m working on mine as we speak and my bed floor needs some repair. I was going to line it anyway, so thought I’d see if you wanted to part with your old one. I’m in Bowling Green, so local to you. Crazy to see the transformation that you’re going through on this truck. I’ve seen it around town over the years and always thought it looked great. Thanks, Mike.
MHarvey is offline   Reply With Quote
Old 11-22-2019, 09:16 AM   #49
lukeembry
Registered User
 
Join Date: Oct 2010
Location: morgantown ky
Posts: 99
Re: 85 C10 LT/6L80 Frame off build

Mike you just missed out, i gave it away last week. after posting it forsale a few times and no bites i gave it away to clean up my shop. if you need any other parts let me know, i still have alot of stuff.







Quote:
Originally Posted by MHarvey View Post
Hey Luke, would you want to sell your old bed floor? I’m working on mine as we speak and my bed floor needs some repair. I was going to line it anyway, so thought I’d see if you wanted to part with your old one. I’m in Bowling Green, so local to you. Crazy to see the transformation that you’re going through on this truck. I’ve seen it around town over the years and always thought it looked great. Thanks, Mike.
lukeembry is offline   Reply With Quote
Old 11-22-2019, 09:22 AM   #50
MHarvey
Registered User
 
Join Date: Mar 2013
Location: Bowling Green, Ky
Posts: 14
Re: 85 C10 LT/6L80 Frame off build

Thanks Luke, I appreciate it. I’ve been so off again/on again with mine that I haven’t kept my eyes open for certain stuff and I seem to miss out. Your truck is looking great, keep up the good work!
MHarvey is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com