Looked at this truck today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 05-07-2020, 07:59 PM

-
I went and looked at this truck this afternoon. It isn't advertised anywhere. It has the usual Iowa rust and has been sitting for quite a few years. It is only 7 miles from me. They want $1500 for it. It isn't in the best shape but I would say it is saveable. It was originally a 3 speed manual but someone installed a floor shifter in it.

This Suburban is in the same building.

http://67-72chevytrucks.com/vboard/s...d.php?t=805856

LockDoc

palallin · 05-07-2020, 08:02 PM

Put some air in those tires and hit the highway, Doc.

**AussieinNC** · 05-07-2020, 08:04 PM

If I were closer I would grab it....

They are getting harder to get every day...especially ones that are essentially unmolested...

**jocko** · 05-07-2020, 08:16 PM

nice truck nice price, hope you grab it Leon

**EdwardSams** · 05-07-2020, 08:56 PM

Wish I could find something like that in NY!

**too much stuff** · 05-07-2020, 10:33 PM

Its funny how close some deals are sometimes. Doesn't look too bad...

**68bowtie** · 05-07-2020, 10:34 PM

Nice!!

**Boog** · 05-07-2020, 10:39 PM

$1500. Does it have a clean title? If so what are ya waiting for?

YBNORML · 05-07-2020, 10:42 PM

For $1500 I would buy that every day and twice on sundays!!!!!

**LockDoc** · 05-07-2020, 10:48 PM

Quote:

Originally Posted by jocko

nice truck nice price, hope you grab it Leon

We will see.

Quote:

Originally Posted by too much stuff

Its funny how close some deals are sometimes. Doesn't look too bad...

I spotted another one right here in town the other day that I had never seen before. (1700 people) I am going to see if I can find the owner tomorrow if it isn't raining.

Quote:

Originally Posted by Boog

$1500. Does it have a clean title? If so what are ya waiting for?

Yes, it does have a clean title.

LockDoc

**special-K** · 05-08-2020, 06:10 AM

Love it!

Daron65 · 05-08-2020, 07:29 AM

Quote:

Originally Posted by EdwardSams

Wish I could find something like that in NY!

I agree with you. Its the same in most of Western PA. If that truck was in our area, they would be asking 5K. It all depends on location.

67C10Step · 05-08-2020, 08:12 AM

I'd be scooping that thing up at that price! Especially since that is my exact project and a second one is always better, right?

tim_mc · 05-08-2020, 08:23 AM

Short bed step-side, all one color original paint? Oh yeah, grab it Doc! For that I'd be tempted to make a road trip from STL.

Richard2112 · 05-08-2020, 09:41 AM

That actually looks in good shape. Paid 1500 for my C30 and towed it from another state. 7 miles away is close. Get a friend to help you push it home

**bigmac73** · 05-08-2020, 09:59 AM

your lucky i am not in Iowa or i would come and grab it quick, as I am wanting a short stepside for my next project

do not pass this up for that price. trust me you could flip it easy

68Gold/white · 05-08-2020, 10:42 AM

Nice "Work'n man's" pickup!!!

Markuli · 05-08-2020, 10:43 AM

Yep that would be a $7500 truck in my area... If barn finds in my area ever existed, that is. I wish I had the networking skills to find these off-the-web deals!

Mykids69 · 05-08-2020, 10:44 AM

Is that a blue and white Suburban in the background???????? Do you know the story on it?

BLAZERMAN · 05-08-2020, 10:47 AM

Those 1 year only stepside fenders are not being reproduced and are highly sought after. The Suburban looks really solid, maybe make a package deal on the pair? If you have the room to store them I cant see how you could go wrong.

**LockDoc** · 05-08-2020, 10:49 AM

-
Thanks for the input guys. I don't need to be in a hurry on this so I am thinking on it. I have a few things working against me right at the moment...

LockDoc

**LockDoc** · 05-08-2020, 10:50 AM

Quote:

Originally Posted by Mykids69

Is that a blue and white Suburban in the background???????? Do you know the story on it?

Yes it is. The link is in my first post above.

LockDoc

**LockDoc** · 05-08-2020, 10:54 AM

Quote:

Originally Posted by BLAZERMAN

Those 1 year only stepside fenders are not being reproduced and are highly sought after. The Suburban looks really solid, maybe make a package deal on the pair? If you have the room to store them I cant see how you could go wrong.

Hey Rob,

I have plenty of room to store them. The suburban has rust around the bottom. Problem is I can't get down far enough to take lower pictures or slide underneath because of my recent back surgery.

LockDoc

**dagnabbitt** · 05-08-2020, 10:58 AM

I couldn't put a price on that truck because you would never, ever, not in a million years find one like that up here.

67C10Step · 05-08-2020, 11:02 AM

Quote:

Originally Posted by BLAZERMAN

Those 1 year only stepside fenders are not being reproduced and are highly sought after. The Suburban looks really solid, maybe make a package deal on the pair? If you have the room to store them I cant see how you could go wrong.

If that bed is in good shape I'd say its worth the asking price. I have a super nice set of 68-72 fenders for my 67 project but I'd really like to find some 67 step fenders and not modify the ones I have.

If I were closer and Loc didn't want it I'm with many in that I'd be all over it.

05-07-2020, 07:59 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,648	Looked at this truck today - I went and looked at this truck this afternoon. It isn't advertised anywhere. It has the usual Iowa rust and has been sitting for quite a few years. It is only 7 miles from me. They want $1500 for it. It isn't in the best shape but I would say it is saveable. It was originally a 3 speed manual but someone installed a floor shifter in it. This Suburban is in the same building. http://67-72chevytrucks.com/vboard/s...d.php?t=805856 LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-07-2020, 08:02 PM	#2
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,238	Re: Looked at this truck today Put some air in those tires and hit the highway, Doc. __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.

05-07-2020, 08:04 PM	#3
AussieinNC Moderator Join Date: Jun 2017 Location: Cherryville, NC Posts: 2,204	Re: Looked at this truck today If I were closer I would grab it.... They are getting harder to get every day...especially ones that are essentially unmolested... __________________ Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox

05-07-2020, 08:16 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Looked at this truck today nice truck nice price, hope you grab it Leon

05-07-2020, 08:56 PM	#5
EdwardSams Senior Member Join Date: Aug 2018 Location: Long Island, NY Posts: 236	Re: Looked at this truck today Wish I could find something like that in NY!

05-07-2020, 10:33 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Looked at this truck today Its funny how close some deals are sometimes. Doesn't look too bad... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-07-2020, 10:34 PM	#7
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,742	Re: Looked at this truck today Nice!! __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-07-2020, 10:39 PM	#8
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,453	Re: Looked at this truck today $1500. Does it have a clean title? If so what are ya waiting for? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

05-07-2020, 10:42 PM	#9
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,850	Re: Looked at this truck today For $1500 I would buy that every day and twice on sundays!!!!! __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

05-08-2020, 06:10 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Looked at this truck today Love it! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-08-2020, 08:12 AM	#13
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: Looked at this truck today I'd be scooping that thing up at that price! Especially since that is my exact project and a second one is always better, right? __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

05-08-2020, 08:23 AM	#14
tim_mc Registered User Join Date: Jan 2019 Location: St Peters, MO Posts: 440	Re: Looked at this truck today Short bed step-side, all one color original paint? Oh yeah, grab it Doc! For that I'd be tempted to make a road trip from STL. __________________ 1967 C20, 350 SBC w/Comp roller cam, 700R4 w/3.42 posi, PS, 4-wheel PDB, Old Air AC & GM Tilt column.

05-08-2020, 09:41 AM	#15
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: Looked at this truck today That actually looks in good shape. Paid 1500 for my C30 and towed it from another state. 7 miles away is close. Get a friend to help you push it home

05-08-2020, 09:59 AM	#16
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: Looked at this truck today your lucky i am not in Iowa or i would come and grab it quick, as I am wanting a short stepside for my next project do not pass this up for that price. trust me you could flip it easy __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

05-08-2020, 10:42 AM	#17
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,387	Re: Looked at this truck today Nice "Work'n man's" pickup!!!



Register or Log In To remove these advertisements.

05-08-2020, 10:43 AM	#18
Markuli Registered User Join Date: Apr 2018 Location: Riverdale, NJ Posts: 85	Re: Looked at this truck today Yep that would be a $7500 truck in my area... If barn finds in my area ever existed, that is. I wish I had the networking skills to find these off-the-web deals!

05-08-2020, 10:44 AM	#19
Mykids69 Registered User Join Date: Mar 2017 Location: Magnolia, TX Posts: 174	Re: Looked at this truck today Is that a blue and white Suburban in the background???????? Do you know the story on it? Attached Images __________________ 68' C20 Custom Camper 350ci/turbo 400 Mine 69' C10 long bed 380 hp 350ci/turbo 400 Son's 70' C10 long bed Orchard Barn Find Project Sold

05-08-2020, 10:47 AM	#20
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Looked at this truck today Those 1 year only stepside fenders are not being reproduced and are highly sought after. The Suburban looks really solid, maybe make a package deal on the pair? If you have the room to store them I cant see how you could go wrong. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

05-08-2020, 10:49 AM	#21
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,648	Re: Looked at this truck today - Thanks for the input guys. I don't need to be in a hurry on this so I am thinking on it. I have a few things working against me right at the moment... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-08-2020, 10:58 AM	#24
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,404	Re: Looked at this truck today I couldn't put a price on that truck because you would never, ever, not in a million years find one like that up here. __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

Register or Log In To remove these advertisements.