TX WTB Front 4x4 painted hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boynton · 12-24-2021, 01:24 PM

After some education I am now looking for some K10 front stainless dog dish caps. I’m not looking for a perfect pair with nice paint just a straight pair I can afford to buy and blast to powder coat later.

Thank you everyone for the education!

Looking for a set of front 4x4 hubcaps. I plan on restoring them so paint quality is not a priority just straight and not rusted out. Surface rust doesn’t scare me as I plan on media blasting them anyway. Here is a photo of what I’m looking for. Hopefully these don’t cost a fortune…I’m also open to a set of metal caps if someone has them laying around. Photos can be sent to 254-338-1489 as I know some have a hard time posting them here. Thank y’all and have a merry Christmas!

**Joesjunk** · 12-24-2021, 11:01 PM

I don’t believe GM ever made a painted open hub cap. Have the centers of those been cut out?

boynton · 12-24-2021, 11:58 PM

Quote:

Originally Posted by Joesjunk

I don’t believe GM ever made a painted open hub cap. Have the centers of those been cut out?

I have no idea. A buddy of mine has them on his k20 suburban (larger caps) so I just assumed that they were available from GM for the k10s like the polished metal caps but I could be way off. I am new to the dog dish world so I’m open to any opinions. Another board member had these posted for sale (they are no longer available) so I do not know the history of them or if they were cut down.

**Ironhorse** · 12-25-2021, 12:27 AM

Quote:

Originally Posted by Joesjunk

I don’t believe GM ever made a painted open hub cap. Have the centers of those been cut out?

No authority on this for sure but believe this to be correct. Have never seen a set of "factory" stamped and cut painted K/10 hubcaps. If at all possible look to the center of the cutout sections and see if the inner rim is "rolled" with a curved edge. Even that may not be a true indication. I do know a member here has offered the 3/4 ton caps for the center cutout process in the past but don't think the K/10 half ton caps are offered for such.

boynton · 12-25-2021, 01:20 AM

Quote:

Originally Posted by Ironhorse

No authority on this for sure but believe this to be correct. Have never seen a set of "factory" stamped and cut painted K/10 hubcaps. If at all possible look to the center of the cutout sections and see if the inner rim is "rolled" with a curved edge. Even that may not be a true indication. I do know a member here has offered the 3/4 ton caps for the center cutout process in the past but don't think the K/10 half ton caps are offered for such.

Very interesting. I have a few rough caps and I had already considered trying to trim som down so I guess I’ll give it a go. I’m open to any suggestions out there!

**too much stuff** · 12-25-2021, 11:25 AM

Quote:

Originally Posted by Joesjunk

I don’t believe GM ever made a painted open hub cap. Have the centers of those been cut out?

I agree with joe on this one.

BLT gmc · 12-25-2021, 01:11 PM

So what i did was powder coat a 4x4 SS front pair factory white. Rolled edge already done and durability of powder coated SS

**special-K** · 12-25-2021, 04:10 PM

On all 4wds, if the truck didn't have the chrome hubcap option, it came with no hubcaps. I have made (cut holes and rolled the edge) them and also scuffed up stainless 4wd caps and had them powder coated in the past

**Tmend** · 12-25-2021, 04:51 PM

I own and have sold open front painted k20 caps. Never owned a set of k10 open pained front

boynton · 12-25-2021, 04:54 PM

Quote:

Originally Posted by BLT gmc

So what i did was powder coat a 4x4 SS front pair factory white. Rolled edge already done and durability of powder coated SS

This is definitely an option I have considered.

Quote:

Originally Posted by special-K

On all 4wds, if the truck didn't have the chrome hubcap option, it came with no hubcaps. I have made (cut holes and rolled the edge) them and also scuffed up stainless 4wd caps and had them powder coated in the past

Thanks for the info! I’m always learning something new.

Quote:

Originally Posted by Tmend

I own and have sold open front painted k20 caps. Never owned a set of k10 open pained front

This explains why I can’t find any!

**Tmend** · 12-25-2021, 05:07 PM

Painted ones in your post are cut sir. Not rolled and you can see at the very beginning of opening it curves straight up and has no lip to fill the open space. Once mounted most likely wouldn't be able to notice .
Name: 6B397D60-9620-4FCA-B3DB-B104873B5012.jpg
Views: 147
Size: 18.9 KB

Name: 6B397D60-9620-4FCA-B3DB-B104873B5012.jpg
Views: 147
Size: 18.9 KB

Name: A1138783-FAA7-4372-A9E9-A5D60E770AAE.jpg
Views: 124
Size: 27.9 KB

boynton · 12-25-2021, 07:01 PM

Quote:

Originally Posted by Tmend

Painted ones in your post are cut sir. Not rolled and you can see at the very beginning of opening it curves straight up and has no lip to fill the open space. Once mounted most likely would be able to notice .
Attachment 2153989

Attachment 2153990

Makes sense. I’m learning a lot about dog dish caps this week.

12-24-2021, 01:24 PM	#1
boynton Registered User Join Date: Feb 2012 Location: Salado, Texas Posts: 1,418	WTB Front 4x4 painted hubcaps After some education I am now looking for some K10 front stainless dog dish caps. I’m not looking for a perfect pair with nice paint just a straight pair I can afford to buy and blast to powder coat later. Thank you everyone for the education! Looking for a set of front 4x4 hubcaps. I plan on restoring them so paint quality is not a priority just straight and not rusted out. Surface rust doesn’t scare me as I plan on media blasting them anyway. Here is a photo of what I’m looking for. Hopefully these don’t cost a fortune…I’m also open to a set of metal caps if someone has them laying around. Photos can be sent to 254-338-1489 as I know some have a hard time posting them here. Thank y’all and have a merry Christmas! Attached Images __________________ Just trying to figure this out... 1970 SWB Step-Side http://67-72chevytrucks.com/vboard/s...d.php?t=552980 1970 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=584499 1970 SWB One Owner Step Side 6.0 LY6/6L90 http://67-72chevytrucks.com/vboard/s...d.php?t=617630 Junkyard's 1971 short wide http://67-72chevytrucks.com/vboard/s...86#post7531186 Last edited by boynton; 12-25-2021 at 04:58 PM. Reason: New information

12-24-2021, 11:01 PM	#2
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: WTB Front 4x4 painted hubcaps I don’t believe GM ever made a painted open hub cap. Have the centers of those been cut out? __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-25-2021, 01:11 PM	#7
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,107	Re: WTB Front 4x4 painted hubcaps So what i did was powder coat a 4x4 SS front pair factory white. Rolled edge already done and durability of powder coated SS

12-25-2021, 04:10 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: WTB Front 4x4 painted hubcaps On all 4wds, if the truck didn't have the chrome hubcap option, it came with no hubcaps. I have made (cut holes and rolled the edge) them and also scuffed up stainless 4wd caps and had them powder coated in the past __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-25-2021, 04:51 PM	#9
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,262	Re: WTB Front 4x4 painted hubcaps I own and have sold open front painted k20 caps. Never owned a set of k10 open pained front __________________ Some progress is better then no progress

12-25-2021, 05:07 PM	#11
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,262	Re: WTB Front 4x4 painted hubcaps Painted ones in your post are cut sir. Not rolled and you can see at the very beginning of opening it curves straight up and has no lip to fill the open space. Once mounted most likely wouldn't be able to notice . __________________ Some progress is better then no progress Last edited by Tmend; 12-25-2021 at 07:12 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.