NV WTB, clean OEM RH A/C Vent Bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 03-23-2022, 08:17 PM

OEM. Mint would be great, but light scratches ok. I'll take a pair if it makes the deal, for all I know there were two shades of black anyhow.

1971 C10

Thanks
Tony

**71CHEVYSHORTBED402** · 03-28-2022, 06:19 PM

Bumped

**70STOVEBOLT** · 03-29-2022, 05:16 PM

Tony, I have a pair of blue ones, one has a broken clip, the other is good. If interested I will post pics.

**71CHEVYSHORTBED402** · 03-30-2022, 12:36 PM

Thanks bolt, but I'm trying to match-up my LH one, she's a beauty, the other busted.

**70STOVEBOLT** · 03-30-2022, 02:15 PM

No problem, good luck in your search. Someone else was looking for a pair of these, but it looked like they found them. You might try member Cash3481, he had some a while back.

**LockDoc** · 03-31-2022, 10:05 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Thanks bolt, but I'm trying to match-up my LH one, she's a beauty, the other busted.

I know I have 3 black ones, 2 bright green ones, and 2 blue ones. I will have to check them in the morning and snap a couple of pictures.

LockDoc

**LockDoc** · 04-01-2022, 12:19 PM

-
I want to sell these as pairs.

OK, the black ones are nice with no broken tabs and have all of the screws and the hose adapters/ball retainers. $50 shipped.

The repainted bright green ones are pretty nice and have the hose adapters/ball retainers. One has one bent over tab. The tab is all there but needs heated and straightened out. No screws. (I am going to try and find them) $40 shipped.

The blue ones have been repainted and are pretty nice, and all tabs are good. Only one has the hose adapter/ball retainer. No screws. (I am going to try and find them) $40 shipped.

The plating is bad on all of the balls.

LockDoc

**71CHEVYSHORTBED402** · 04-05-2022, 05:21 PM

Quote:

Originally Posted by LockDoc

-
I want to sell these as pairs.

OK, the black ones are nice with no broken tabs and have all of the screws and the hose adapters/ball retainers. $50 shipped.

The repainted bright green ones are pretty nice and have the hose adapters/ball retainers. One has one bent over tab. The tab is all there but needs heated and straightened out. No screws. (I am going to try and find them) $40 shipped.

The blue ones have been repainted and are pretty nice, and all tabs are good. Only one has the hose adapter/ball retainer. No screws. (I am going to try and find them) $40 shipped.

The plating is bad on all of the balls.

LockDoc

PM sent Doc, I would like the black set. Thanks A BUNCH

**71CHEVYSHORTBED402** · 04-12-2022, 01:28 PM

Well Doc, I cleaned the black widow eggs? out of what I needed to, and always nice to have good spare parts. Thanks again Leon.

**LockDoc** · 04-12-2022, 02:22 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Well Doc, I cleaned the black widow eggs? out of what I needed to, and always nice to have good spare parts. Thanks again Leon.

No charge for any of the "EXTRA" stuff so it's all good....

Thanks,
LockDoc
-

**71CHEVYSHORTBED402** · 04-13-2022, 01:08 AM

Quote:

Originally Posted by LockDoc

No charge for any of the "EXTRA" stuff so it's all good....

Thanks,
LockDoc
-

In more ways than one, thanks again Doc.

03-23-2022, 08:17 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,176	WTB, clean OEM RH A/C Vent Bezel OEM. Mint would be great, but light scratches ok. I'll take a pair if it makes the deal, for all I know there were two shades of black anyhow. 1971 C10 Thanks Tony __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-28-2022, 06:19 PM	#2
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,176	Re: WTB, clean OEM RH A/C Vent Bezel Bumped __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-29-2022, 05:16 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,243	Re: WTB, clean OEM RH A/C Vent Bezel Tony, I have a pair of blue ones, one has a broken clip, the other is good. If interested I will post pics. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-30-2022, 12:36 PM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,176	Re: WTB, clean OEM RH A/C Vent Bezel Thanks bolt, but I'm trying to match-up my LH one, she's a beauty, the other busted. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-30-2022, 02:15 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,243	Re: WTB, clean OEM RH A/C Vent Bezel No problem, good luck in your search. Someone else was looking for a pair of these, but it looked like they found them. You might try member Cash3481, he had some a while back. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-01-2022, 12:19 PM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,369	Re: WTB, clean OEM RH A/C Vent Bezel - I want to sell these as pairs. OK, the black ones are nice with no broken tabs and have all of the screws and the hose adapters/ball retainers. $50 shipped. The repainted bright green ones are pretty nice and have the hose adapters/ball retainers. One has one bent over tab. The tab is all there but needs heated and straightened out. No screws. (I am going to try and find them) $40 shipped. The blue ones have been repainted and are pretty nice, and all tabs are good. Only one has the hose adapter/ball retainer. No screws. (I am going to try and find them) $40 shipped. The plating is bad on all of the balls. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 04-02-2022 at 10:57 AM.

04-12-2022, 01:28 PM	#9
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,176	Re: WTB, clean OEM RH A/C Vent Bezel Well Doc, I cleaned the black widow eggs? out of what I needed to, and always nice to have good spare parts. Thanks again Leon. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.