|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-19-2023, 06:53 PM
|
#1 |
|
Senior Member
 
Join Date: Jun 2015
Location: Acton Ma
Posts: 745
|
70-71 deluxe door panels
Had a question on 70-71 deluxe door panels. swapping over my steel 71 door panels to the deluxe panels. what holds the deluxe panels at the bottom of the door. my steel ones have 4 screws but i have seen pics of installed deluxe panels without screws. any help would be greatly appreciated.
|
|
|
|
08-19-2023, 09:08 PM
|
#2 |
|
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,715
|
Re: 70-71 deluxe door panels
They all have 4 screws on the bottom. (except 72) You will need to change your upper receiver also.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
|
|
|
|
08-20-2023, 06:58 AM
|
#3 | |
|
Senior Member
Join Date: Jun 2015
Location: Acton Ma
Posts: 745
|
Re: 70-71 deluxe door panels
Quote:
|
|
|
|
|
|
08-21-2023, 12:44 PM
|
#4 |
|
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,339
|
Re: 70-71 deluxe door panels
While we are on the topic of these 1970-71 deluxe CST/Cheyenne door panels, the reproduction deluxe door panels seem to have the woodgrain strip at the top. My original 1970 Blazer CST door panels did not have the woodgrain strip. The panel had a scroll pattern all the way around the panel like the example below:
  The commonly available reproduction door panels: 
__________________
1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress...  1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...  2017 Sierra 1500 SLT 4WD, Black, 41k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 60k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
|
|
|
|
08-21-2023, 04:45 PM
|
#5 |
|
Senior Member
Join Date: Jun 2015
Location: Acton Ma
Posts: 745
|
Re: 70-71 deluxe door panels
nice looking truck. the door panels i purchased where from brothers with the wood grain you described. i have seen these panels mounted with out any screws showing on the bottom. i’m not sure if they glued plastic studs on the back or what the did. would you mind getting a close up of the bottom of your panel?
|
|
|
|
|
08-22-2023, 07:24 AM
|
#6 |
|
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,339
|
Re: 70-71 deluxe door panels
Those pics are from the net. On my 1970 Blazer, I am going with 1972 panels out of preference.
__________________
1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress... 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 41k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 60k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
